| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 13 Jun 2023 11:45:26 +0200
From: Horatiu Vultur <horatiu.vultur@...rochip.com>
To: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, Horatiu Vultur <horatiu.vultur@...rochip.com>
Subject: [PATCH net-next v2 2/2] net: micrel: Schedule work to read seconds for lan8841
Instead of reading the seconds part of the received frame for each of
the frames, schedule a workqueue to read the seconds part every 500ms
and then for each of the received frames use this information instead of
reading again the seconds part. Because if for example running with 512
frames per second, there is no point to read 512 times the second part.
Of course care needs to be taken in case of the less two significant
bits are 0 or 3, to make sure there are no seconds wraparound.
This will improve the CPU usage by ~20% and also it is possible to receive
1024 Sync frames per second.
Signed-off-by: Horatiu Vultur <horatiu.vultur@...rochip.com>
---
drivers/net/phy/micrel.c | 49 ++++++++++++++++++++++++++++++++++++----
1 file changed, 45 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 28365006b2067..9832eea404377 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -33,6 +33,7 @@
#include <linux/ptp_classify.h>
#include <linux/net_tstamp.h>
#include <linux/gpio/consumer.h>
+#include <linux/workqueue.h>
/* Operation Mode Strap Override */
#define MII_KSZPHY_OMSO 0x16
@@ -254,6 +255,9 @@
#define PS_TO_REG 200
#define FIFO_SIZE 8
+/* Delay used to get the second part from the LTC */
+#define LAN8841_GET_SEC_LTC_DELAY (500 * NSEC_PER_MSEC)
+
struct kszphy_hw_stat {
const char *string;
u8 reg;
@@ -321,6 +325,9 @@ struct kszphy_ptp_priv {
/* Lock for ptp_clock */
struct mutex ptp_lock;
struct ptp_pin_desc *pin_config;
+
+ s64 seconds;
+ struct delayed_work seconds_work;
};
struct kszphy_priv {
@@ -3840,6 +3847,12 @@ static void lan8841_ptp_enable_processing(struct kszphy_ptp_priv *ptp_priv,
LAN8841_PTP_INSERT_TS_32BIT,
LAN8841_PTP_INSERT_TS_EN |
LAN8841_PTP_INSERT_TS_32BIT);
+
+ /* Schedule the work to read the seconds, which will be used in
+ * the received timestamp
+ */
+ schedule_delayed_work(&ptp_priv->seconds_work,
+ nsecs_to_jiffies(LAN8841_GET_SEC_LTC_DELAY));
} else {
/* Disable interrupts on the TX side */
phy_modify_mmd(phydev, 2, LAN8841_PTP_INT_EN,
@@ -3853,6 +3866,11 @@ static void lan8841_ptp_enable_processing(struct kszphy_ptp_priv *ptp_priv,
LAN8841_PTP_INSERT_TS_32BIT, 0);
ptp_cancel_worker_sync(ptp_priv->ptp_clock);
+
+ /* Stop the work, as there is no reason to continue to read the
+ * seconds if there is no timestamping enabled
+ */
+ cancel_delayed_work_sync(&ptp_priv->seconds_work);
}
}
@@ -4062,6 +4080,8 @@ static int lan8841_ptp_settime64(struct ptp_clock_info *ptp,
phy_write_mmd(phydev, 2, LAN8841_PTP_LTC_SET_NS_LO, lower_16_bits(ts->tv_nsec));
phy_write_mmd(phydev, 2, LAN8841_PTP_LTC_SET_NS_HI, upper_16_bits(ts->tv_nsec) & 0x3fff);
+ ptp_priv->seconds = ts->tv_sec;
+
/* Set the command to load the LTC */
phy_write_mmd(phydev, 2, LAN8841_PTP_CMD_CTL,
LAN8841_PTP_CMD_CTL_PTP_LTC_LOAD);
@@ -4116,7 +4136,6 @@ static void lan8841_ptp_getseconds(struct ptp_clock_info *ptp,
struct phy_device *phydev = ptp_priv->phydev;
time64_t s;
- mutex_lock(&ptp_priv->ptp_lock);
/* Issue the command to read the LTC */
phy_write_mmd(phydev, 2, LAN8841_PTP_CMD_CTL,
LAN8841_PTP_CMD_CTL_PTP_LTC_READ);
@@ -4127,7 +4146,6 @@ static void lan8841_ptp_getseconds(struct ptp_clock_info *ptp,
s |= phy_read_mmd(phydev, 2, LAN8841_PTP_LTC_RD_SEC_MID);
s <<= 16;
s |= phy_read_mmd(phydev, 2, LAN8841_PTP_LTC_RD_SEC_LO);
- mutex_unlock(&ptp_priv->ptp_lock);
set_normalized_timespec64(ts, s, 0);
}
@@ -4644,15 +4662,20 @@ static long lan8841_ptp_do_aux_work(struct ptp_clock_info *ptp)
u32 ts_header;
while ((skb = skb_dequeue(&ptp_priv->rx_queue)) != NULL) {
- lan8841_ptp_getseconds(ptp, &ts);
+ mutex_lock(&ptp_priv->ptp_lock);
+ ts.tv_sec = ptp_priv->seconds;
+ mutex_unlock(&ptp_priv->ptp_lock);
+
ts_header = __be32_to_cpu(LAN8841_SKB_CB(skb)->header->reserved2);
shhwtstamps = skb_hwtstamps(skb);
memset(shhwtstamps, 0, sizeof(*shhwtstamps));
/* Check for any wrap arounds for the second part */
- if ((ts.tv_sec & GENMASK(1, 0)) < ts_header >> 30)
+ if ((ts.tv_sec & GENMASK(1, 0)) == 0 && (ts_header >> 30) == 3)
ts.tv_sec -= GENMASK(1, 0) + 1;
+ else if ((ts.tv_sec & GENMASK(1, 0)) == 3 && (ts_header >> 30) == 0)
+ ts.tv_sec += 1;
shhwtstamps->hwtstamp =
ktime_set((ts.tv_sec & ~(GENMASK(1, 0))) | ts_header >> 30,
@@ -4665,6 +4688,21 @@ static long lan8841_ptp_do_aux_work(struct ptp_clock_info *ptp)
return -1;
}
+static void lan8841_ptp_seconds_work(struct work_struct *seconds_work)
+{
+ struct kszphy_ptp_priv *ptp_priv =
+ container_of(seconds_work, struct kszphy_ptp_priv, seconds_work.work);
+ struct timespec64 ts;
+
+ mutex_lock(&ptp_priv->ptp_lock);
+ lan8841_ptp_getseconds(&ptp_priv->ptp_clock_info, &ts);
+ ptp_priv->seconds = ts.tv_sec;
+ mutex_unlock(&ptp_priv->ptp_lock);
+
+ schedule_delayed_work(&ptp_priv->seconds_work,
+ nsecs_to_jiffies(LAN8841_GET_SEC_LTC_DELAY));
+}
+
static struct ptp_clock_info lan8841_ptp_clock_info = {
.owner = THIS_MODULE,
.name = "lan8841 ptp",
@@ -4749,6 +4787,8 @@ static int lan8841_probe(struct phy_device *phydev)
phydev->mii_ts = &ptp_priv->mii_ts;
+ INIT_DELAYED_WORK(&ptp_priv->seconds_work, lan8841_ptp_seconds_work);
+
return 0;
}
@@ -4758,6 +4798,7 @@ static int lan8841_suspend(struct phy_device *phydev)
struct kszphy_ptp_priv *ptp_priv = &priv->ptp_priv;
ptp_cancel_worker_sync(ptp_priv->ptp_clock);
+ cancel_delayed_work_sync(&ptp_priv->seconds_work);
return genphy_suspend(phydev);
}
--
2.38.0
Powered by blists - more mailing lists