netdev - [PATCH net resend] net: qca_spi: Avoid high load if QCA7000 is not available

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230614111714.3612-1-stefan.wahren@chargebyte.com>
Date: Wed, 14 Jun 2023 13:17:14 +0200
From: Stefan Wahren <stefan.wahren@...rgebyte.com>
To: "David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>
Cc: Stefan Wahren <stefan.wahren@...e.com>,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Stefan Wahren <stefan.wahren@...rgebyte.com>
Subject: [PATCH net resend] net: qca_spi: Avoid high load if QCA7000 is not available

In case the QCA7000 is not available via SPI (e.g. in reset),
the driver will cause a high load. The reason for this is
that the synchronization is never finished and schedule()
is never called. Since the synchronization is not timing
critical, it's safe to drop this from the scheduling condition.

Signed-off-by: Stefan Wahren <stefan.wahren@...rgebyte.com>
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for
 QCA7000")
---
 drivers/net/ethernet/qualcomm/qca_spi.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c
 b/drivers/net/ethernet/qualcomm/qca_spi.c
index bba1947792ea16..90f18ea4c28ba1 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -582,8 +582,7 @@ qcaspi_spi_thread(void *data)
 	while (!kthread_should_stop()) {
 		set_current_state(TASK_INTERRUPTIBLE);
 		if ((qca->intr_req == qca->intr_svc) &&
-		    (qca->txr.skb[qca->txr.head] == NULL) &&
-		    (qca->sync == QCASPI_SYNC_READY))
+		    !qca->txr.skb[qca->txr.head])
 			schedule();
 
 		set_current_state(TASK_RUNNING);