| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 16 Jun 2023 16:53:19 +0300
From: "Radu Pirea (NXP OSS)" <radu-nicolae.pirea@....nxp.com>
To: andrew@...n.ch,
hkallweit1@...il.com,
linux@...linux.org.uk,
davem@...emloft.net,
edumazet@...gle.com,
kuba@...nel.org,
pabeni@...hat.com,
richardcochran@...il.com
Cc: netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
sebastian.tobuschat@....com,
"Radu Pirea (NXP OSS)" <radu-nicolae.pirea@....nxp.com>
Subject: [PATCH net-next v1 10/14] net: phy: nxp-c45-tja11xx: handle FUSA irq
TJA1120 and TJA1103 have a set of functional safety hardware tests
executed after every reset, and when the tests are done, the IRQ line is
asserted. For the moment, the purpose of these handlers is to acknowledge
the IRQ and not to check the FUSA tests status.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@....nxp.com>
---
drivers/net/phy/nxp-c45-tja11xx.c | 72 ++++++++++++++++++++++++++++++-
1 file changed, 70 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/nxp-c45-tja11xx.c b/drivers/net/phy/nxp-c45-tja11xx.c
index 838bd4a638bc..0a17a1e80a2b 100644
--- a/drivers/net/phy/nxp-c45-tja11xx.c
+++ b/drivers/net/phy/nxp-c45-tja11xx.c
@@ -29,6 +29,11 @@
#define TJA1120_VEND1_EXT_TS_MODE 0x1012
+#define TJA1120_GLOBAL_INFRA_IRQ_ACK 0x2C08
+#define TJA1120_GLOBAL_INFRA_IRQ_EN 0x2C0A
+#define TJA1120_GLOBAL_INFRA_IRQ_STATUS 0x2C0C
+#define TJA1120_DEV_BOOT_DONE BIT(1)
+
#define TJA1120_EGRESS_TS_DATA_S 0x9060
#define TJA1120_EGRESS_TS_END 0x9067
#define TJA1120_TS_VALID BIT(0)
@@ -39,6 +44,9 @@
#define VEND1_PHY_IRQ_STATUS 0x80A2
#define PHY_IRQ_LINK_EVENT BIT(1)
+#define VEND1_ALWAYS_ACCESSIBLE 0x801F
+#define FUSA_PASS BIT(4)
+
#define VEND1_PHY_CONTROL 0x8100
#define PHY_CONFIG_EN BIT(14)
#define PHY_START_OP BIT(0)
@@ -261,6 +269,8 @@ struct nxp_c45_phy_data {
struct nxp_c45_hwts *hwts);
void (*ptp_init)(struct phy_device *phydev);
void (*ptp_enable)(struct phy_device *phydev, bool enable);
+ void (*nmi_handler)(struct phy_device *phydev,
+ irqreturn_t *irq_status);
};
struct nxp_c45_phy {
@@ -1148,6 +1158,29 @@ static int nxp_c45_config_intr(struct phy_device *phydev)
}
}
+static int tja1103_config_intr(struct phy_device *phydev)
+{
+ /* We can't disable the FUSA IRQ for TJA1103, but we can clean it up. */
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_ALWAYS_ACCESSIBLE,
+ FUSA_PASS);
+
+ return nxp_c45_config_intr(phydev);
+}
+
+static int tja1120_config_intr(struct phy_device *phydev)
+{
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
+ TJA1120_GLOBAL_INFRA_IRQ_EN,
+ TJA1120_DEV_BOOT_DONE);
+ else
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ TJA1120_GLOBAL_INFRA_IRQ_EN,
+ TJA1120_DEV_BOOT_DONE);
+
+ return nxp_c45_config_intr(phydev);
+}
+
static irqreturn_t nxp_c45_handle_interrupt(struct phy_device *phydev)
{
struct nxp_c45_phy *priv = phydev->priv;
@@ -1184,6 +1217,9 @@ static irqreturn_t nxp_c45_handle_interrupt(struct phy_device *phydev)
ret = IRQ_HANDLED;
}
+ if (data->nmi_handler)
+ data->nmi_handler(phydev, &ret);
+
return ret;
}
@@ -1584,6 +1620,21 @@ static void tja1103_ptp_enable(struct phy_device *phydev, bool enable)
PORT_PTP_CONTROL_BYPASS);
}
+static void tja1103_nmi_handler(struct phy_device *phydev,
+ irqreturn_t *irq_status)
+{
+ int ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND1,
+ VEND1_ALWAYS_ACCESSIBLE);
+ if (ret & FUSA_PASS) {
+ phy_write_mmd(phydev, MDIO_MMD_VEND1,
+ VEND1_ALWAYS_ACCESSIBLE,
+ FUSA_PASS);
+ *irq_status = IRQ_HANDLED;
+ }
+}
+
static const struct nxp_c45_regmap tja1103_regmap = {
.vend1_ptp_clk_period = 0x1104,
.vend1_event_msg_filt = 0x1148,
@@ -1648,6 +1699,7 @@ static const struct nxp_c45_phy_data tja1103_phy_data = {
.get_egressts = nxp_c45_get_hwtxts,
.ptp_init = tja1103_ptp_init,
.ptp_enable = tja1103_ptp_enable,
+ .nmi_handler = tja1103_nmi_handler,
};
static void tja1120_counters_enable(struct phy_device *phydev)
@@ -1682,6 +1734,21 @@ static void tja1120_ptp_enable(struct phy_device *phydev, bool enable)
PTP_ENABLE);
}
+static void tja1120_nmi_handler(struct phy_device *phydev,
+ irqreturn_t *irq_status)
+{
+ int ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND1,
+ TJA1120_GLOBAL_INFRA_IRQ_STATUS);
+ if (ret & TJA1120_DEV_BOOT_DONE) {
+ phy_write_mmd(phydev, MDIO_MMD_VEND1,
+ TJA1120_GLOBAL_INFRA_IRQ_ACK,
+ TJA1120_DEV_BOOT_DONE);
+ *irq_status = IRQ_HANDLED;
+ }
+}
+
static const struct nxp_c45_regmap tja1120_regmap = {
.vend1_ptp_clk_period = 0x1020,
.vend1_event_msg_filt = 0x9010,
@@ -1746,6 +1813,7 @@ static const struct nxp_c45_phy_data tja1120_phy_data = {
.get_egressts = tja1120_get_hwtxts,
.ptp_init = tja1120_ptp_init,
.ptp_enable = tja1120_ptp_enable,
+ .nmi_handler = tja1120_nmi_handler,
};
static struct phy_driver nxp_c45_driver[] = {
@@ -1758,7 +1826,7 @@ static struct phy_driver nxp_c45_driver[] = {
.soft_reset = nxp_c45_soft_reset,
.config_aneg = genphy_c45_config_aneg,
.config_init = nxp_c45_config_init,
- .config_intr = nxp_c45_config_intr,
+ .config_intr = tja1103_config_intr,
.handle_interrupt = nxp_c45_handle_interrupt,
.read_status = genphy_c45_read_status,
.suspend = genphy_c45_pma_suspend,
@@ -1782,7 +1850,7 @@ static struct phy_driver nxp_c45_driver[] = {
.soft_reset = nxp_c45_soft_reset,
.config_aneg = genphy_c45_config_aneg,
.config_init = nxp_c45_config_init,
- .config_intr = nxp_c45_config_intr,
+ .config_intr = tja1120_config_intr,
.handle_interrupt = nxp_c45_handle_interrupt,
.read_status = genphy_c45_read_status,
.suspend = genphy_c45_pma_suspend,
--
2.34.1
Powered by blists - more mailing lists