netdev - [PATCH] be2net: Extend xmit workaround to BE3 chip

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date: Fri, 16 Jun 2023 17:45:49 +0100
From: Ross Lagerwall <ross.lagerwall@...rix.com>
To: <netdev@...r.kernel.org>
CC: Ajit Khaparde <ajit.khaparde@...adcom.com>, Sriharsha Basavapatna
	<sriharsha.basavapatna@...adcom.com>, Somnath Kotur
	<somnath.kotur@...adcom.com>, "David S. Miller" <davem@...emloft.net>, "Eric
 Dumazet" <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni
	<pabeni@...hat.com>, Ross Lagerwall <ross.lagerwall@...rix.com>
Subject: [PATCH] be2net: Extend xmit workaround to BE3 chip

We have seen a bug where the NIC incorrectly changes the length in the
IP header of a padded packet to include the padding bytes. The driver
already has a workaround for this so do the workaround for this NIC too.
This resolves the issue.

The NIC in question identifies itself as follows:

[    8.828494] be2net 0000:02:00.0: FW version is 10.7.110.31
[    8.834759] be2net 0000:02:00.0: Emulex OneConnect(be3): PF FLEX10 port 1

02:00.0 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 01)

Signed-off-by: Ross Lagerwall <ross.lagerwall@...rix.com>
---
 drivers/net/ethernet/emulex/benet/be_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 7e408bcc88de..0defd519ba62 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1135,8 +1135,8 @@ static struct sk_buff *be_lancer_xmit_workarounds(struct be_adapter *adapter,
 	eth_hdr_len = ntohs(skb->protocol) == ETH_P_8021Q ?
 						VLAN_ETH_HLEN : ETH_HLEN;
 	if (skb->len <= 60 &&
-	    (lancer_chip(adapter) || skb_vlan_tag_present(skb)) &&
-	    is_ipv4_pkt(skb)) {
+	    (lancer_chip(adapter) || BE3_chip(adapter) ||
+	     skb_vlan_tag_present(skb)) && is_ipv4_pkt(skb)) {
 		ip = (struct iphdr *)ip_hdr(skb);
 		pskb_trim(skb, eth_hdr_len + ntohs(ip->tot_len));
 	}
-- 
2.31.1