lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230619092402.195578-5-brgl@bgdev.pl>
Date: Mon, 19 Jun 2023 11:23:52 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Vinod Koul <vkoul@...nel.org>,
	Bhupesh Sharma <bhupesh.sharma@...aro.org>,
	Andy Gross <agross@...nel.org>,
	Bjorn Andersson <andersson@...nel.org>,
	Konrad Dybcio <konrad.dybcio@...aro.org>,
	"David S . Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Rob Herring <robh+dt@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Giuseppe Cavallaro <peppe.cavallaro@...com>,
	Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Jose Abreu <joabreu@...opsys.com>,
	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	Andrew Halaney <ahalaney@...hat.com>
Cc: netdev@...r.kernel.org,
	linux-arm-msm@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-stm32@...md-mailman.stormreply.com,
	linux-arm-kernel@...ts.infradead.org,
	Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: [RESEND PATCH v2 04/14] net: stmmac: dwmac-qcom-ethqos: use a helper variable for &pdev->dev

From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>

Shrink code and avoid line breaks by using a helper variable for
&pdev->dev.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Reviewed-by: Andrew Halaney <ahalaney@...hat.com>
---
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 49 ++++++++++---------
 1 file changed, 26 insertions(+), 23 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 28d2514a8795..f0776ddea3ab 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -123,25 +123,26 @@ static void rgmii_updatel(struct qcom_ethqos *ethqos,
 static void rgmii_dump(void *priv)
 {
 	struct qcom_ethqos *ethqos = priv;
+	struct device *dev = &ethqos->pdev->dev;
 
-	dev_dbg(&ethqos->pdev->dev, "Rgmii register dump\n");
-	dev_dbg(&ethqos->pdev->dev, "RGMII_IO_MACRO_CONFIG: %x\n",
+	dev_dbg(dev, "Rgmii register dump\n");
+	dev_dbg(dev, "RGMII_IO_MACRO_CONFIG: %x\n",
 		rgmii_readl(ethqos, RGMII_IO_MACRO_CONFIG));
-	dev_dbg(&ethqos->pdev->dev, "SDCC_HC_REG_DLL_CONFIG: %x\n",
+	dev_dbg(dev, "SDCC_HC_REG_DLL_CONFIG: %x\n",
 		rgmii_readl(ethqos, SDCC_HC_REG_DLL_CONFIG));
-	dev_dbg(&ethqos->pdev->dev, "SDCC_HC_REG_DDR_CONFIG: %x\n",
+	dev_dbg(dev, "SDCC_HC_REG_DDR_CONFIG: %x\n",
 		rgmii_readl(ethqos, SDCC_HC_REG_DDR_CONFIG));
-	dev_dbg(&ethqos->pdev->dev, "SDCC_HC_REG_DLL_CONFIG2: %x\n",
+	dev_dbg(dev, "SDCC_HC_REG_DLL_CONFIG2: %x\n",
 		rgmii_readl(ethqos, SDCC_HC_REG_DLL_CONFIG2));
-	dev_dbg(&ethqos->pdev->dev, "SDC4_STATUS: %x\n",
+	dev_dbg(dev, "SDC4_STATUS: %x\n",
 		rgmii_readl(ethqos, SDC4_STATUS));
-	dev_dbg(&ethqos->pdev->dev, "SDCC_USR_CTL: %x\n",
+	dev_dbg(dev, "SDCC_USR_CTL: %x\n",
 		rgmii_readl(ethqos, SDCC_USR_CTL));
-	dev_dbg(&ethqos->pdev->dev, "RGMII_IO_MACRO_CONFIG2: %x\n",
+	dev_dbg(dev, "RGMII_IO_MACRO_CONFIG2: %x\n",
 		rgmii_readl(ethqos, RGMII_IO_MACRO_CONFIG2));
-	dev_dbg(&ethqos->pdev->dev, "RGMII_IO_MACRO_DEBUG1: %x\n",
+	dev_dbg(dev, "RGMII_IO_MACRO_DEBUG1: %x\n",
 		rgmii_readl(ethqos, RGMII_IO_MACRO_DEBUG1));
-	dev_dbg(&ethqos->pdev->dev, "EMAC_SYSTEM_LOW_POWER_DEBUG: %x\n",
+	dev_dbg(dev, "EMAC_SYSTEM_LOW_POWER_DEBUG: %x\n",
 		rgmii_readl(ethqos, EMAC_SYSTEM_LOW_POWER_DEBUG));
 }
 
@@ -242,6 +243,7 @@ static const struct ethqos_emac_driver_data emac_v3_0_0_data = {
 
 static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 {
+	struct device *dev = &ethqos->pdev->dev;
 	unsigned int val;
 	int retry = 1000;
 
@@ -279,7 +281,7 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 		retry--;
 	} while (retry > 0);
 	if (!retry)
-		dev_err(&ethqos->pdev->dev, "Clear CK_OUT_EN timedout\n");
+		dev_err(dev, "Clear CK_OUT_EN timedout\n");
 
 	/* Set CK_OUT_EN */
 	rgmii_updatel(ethqos, SDCC_DLL_CONFIG_CK_OUT_EN,
@@ -296,7 +298,7 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 		retry--;
 	} while (retry > 0);
 	if (!retry)
-		dev_err(&ethqos->pdev->dev, "Set CK_OUT_EN timedout\n");
+		dev_err(dev, "Set CK_OUT_EN timedout\n");
 
 	/* Set DDR_CAL_EN */
 	rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DDR_CAL_EN,
@@ -322,12 +324,13 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 
 static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
 {
+	struct device *dev = &ethqos->pdev->dev;
 	int phase_shift;
 	int phy_mode;
 	int loopback;
 
 	/* Determine if the PHY adds a 2 ns TX delay or the MAC handles it */
-	phy_mode = device_get_phy_mode(&ethqos->pdev->dev);
+	phy_mode = device_get_phy_mode(dev);
 	if (phy_mode == PHY_INTERFACE_MODE_RGMII_ID ||
 	    phy_mode == PHY_INTERFACE_MODE_RGMII_TXID)
 		phase_shift = 0;
@@ -468,8 +471,7 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
 			      loopback, RGMII_IO_MACRO_CONFIG);
 		break;
 	default:
-		dev_err(&ethqos->pdev->dev,
-			"Invalid speed %d\n", ethqos->speed);
+		dev_err(dev, "Invalid speed %d\n", ethqos->speed);
 		return -EINVAL;
 	}
 
@@ -478,6 +480,7 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
 
 static int ethqos_configure(struct qcom_ethqos *ethqos)
 {
+	struct device *dev = &ethqos->pdev->dev;
 	volatile unsigned int dll_lock;
 	unsigned int i, retry = 1000;
 
@@ -540,8 +543,7 @@ static int ethqos_configure(struct qcom_ethqos *ethqos)
 			retry--;
 		} while (retry > 0);
 		if (!retry)
-			dev_err(&ethqos->pdev->dev,
-				"Timeout while waiting for DLL lock\n");
+			dev_err(dev, "Timeout while waiting for DLL lock\n");
 	}
 
 	if (ethqos->speed == SPEED_1000)
@@ -597,6 +599,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	const struct ethqos_emac_driver_data *data;
 	struct plat_stmmacenet_data *plat_dat;
 	struct stmmac_resources stmmac_res;
+	struct device *dev = &pdev->dev;
 	struct qcom_ethqos *ethqos;
 	int ret;
 
@@ -606,13 +609,13 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 
 	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
 	if (IS_ERR(plat_dat)) {
-		dev_err(&pdev->dev, "dt configuration failed\n");
+		dev_err(dev, "dt configuration failed\n");
 		return PTR_ERR(plat_dat);
 	}
 
 	plat_dat->clks_config = ethqos_clks_config;
 
-	ethqos = devm_kzalloc(&pdev->dev, sizeof(*ethqos), GFP_KERNEL);
+	ethqos = devm_kzalloc(dev, sizeof(*ethqos), GFP_KERNEL);
 	if (!ethqos) {
 		ret = -ENOMEM;
 		goto out_config_dt;
@@ -625,13 +628,13 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 		goto out_config_dt;
 	}
 
-	data = of_device_get_match_data(&pdev->dev);
+	data = of_device_get_match_data(dev);
 	ethqos->por = data->por;
 	ethqos->num_por = data->num_por;
 	ethqos->rgmii_config_loopback_en = data->rgmii_config_loopback_en;
 	ethqos->has_emac3 = data->has_emac3;
 
-	ethqos->rgmii_clk = devm_clk_get(&pdev->dev, "rgmii");
+	ethqos->rgmii_clk = devm_clk_get(dev, "rgmii");
 	if (IS_ERR(ethqos->rgmii_clk)) {
 		ret = PTR_ERR(ethqos->rgmii_clk);
 		goto out_config_dt;
@@ -641,7 +644,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_config_dt;
 
-	ret = devm_add_action_or_reset(&pdev->dev, ethqos_clks_disable, ethqos);
+	ret = devm_add_action_or_reset(dev, ethqos_clks_disable, ethqos);
 	if (ret)
 		goto out_config_dt;
 
@@ -660,7 +663,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	if (of_device_is_compatible(np, "qcom,qcs404-ethqos"))
 		plat_dat->rx_clk_runs_in_lpi = 1;
 
-	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+	ret = stmmac_dvr_probe(dev, plat_dat, &stmmac_res);
 	if (ret)
 		goto out_config_dt;
 
-- 
2.39.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ