netdev - [PATCH net-next 3/3] net: dsa: microchip: fix writes to phy registers >= 0x10

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Tue, 20 Jun 2023 13:38:54 +0200
From: Rasmus Villemoes <linux@...musvillemoes.dk>
To: Woojung Huh <woojung.huh@...rochip.com>,
	UNGLinuxDriver@...rochip.com,
	Andrew Lunn <andrew@...n.ch>,
	Florian Fainelli <f.fainelli@...il.com>,
	Vladimir Oltean <olteanv@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>
Cc: Rasmus Villemoes <linux@...musvillemoes.dk>,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH net-next 3/3] net: dsa: microchip: fix writes to phy registers >= 0x10

According to the errata sheets for ksz9477 and ksz9567, writes to the
PHY registers 0x10-0x1f (i.e. those located at addresses 0xN120 to
0xN13f) must be done as a 32 bit write to the 4-byte aligned address
containing the register, hence requires a RMW in order not to change
the adjacent PHY register.

Signed-off-by: Rasmus Villemoes <linux@...musvillemoes.dk>
---
 drivers/net/dsa/microchip/ksz9477.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index fc5157a10af5..83b7f2d5c1ea 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -329,11 +329,27 @@ int ksz9477_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data)
 
 int ksz9477_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val)
 {
+	u32 mask, val32;
+
 	/* No real PHY after this. */
 	if (!dev->info->internal_phy[addr])
 		return 0;
 
-	return ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
+	if (reg < 0x10)
+		return ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
+
+	/* Errata: When using SPI, I2C, or in-band register access,
+	 * writes to certain PHY registers should be performed as
+	 * 32-bit writes instead of 16-bit writes.
+	 */
+	val32 = val;
+	mask = 0xffff;
+	if ((reg & 1) == 0) {
+		val32 <<= 16;
+		mask <<= 16;
+	}
+	reg &= ~1;
+	return ksz_prmw32(dev, addr, 0x100 + (reg << 1), mask, val32);
 }
 
 void ksz9477_cfg_port_member(struct ksz_device *dev, int port, u8 member)
-- 
2.37.2