| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <7ff597df6c315e4cc6cfb50f9cc399f173475239.1687265905.git.petrm@nvidia.com> Date: Tue, 20 Jun 2023 15:55:54 +0200 From: Petr Machata <petrm@...dia.com> To: "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, <netdev@...r.kernel.org> CC: Petr Machata <petrm@...dia.com>, Ido Schimmel <idosch@...dia.com>, Danielle Ratson <danieller@...dia.com>, Amit Cohen <amcohen@...dia.com>, Shuah Khan <shuah@...nel.org>, <linux-kselftest@...r.kernel.org>, <mlxsw@...dia.com> Subject: [PATCH net-next 08/16] selftests: mlxsw: q_in_q_veto: Disable IPv6 autogen on bridges In a future patch, mlxsw will start adding RIFs to uppers of front panel port netdevices, if they have an IP address. The swp enslavement to the 802.1ad bridge is not allowed, because RIFs are not allowed to be created for 802.1ad bridges, but the address indicates one needs to be created. Thus the veto selftests fail already during the port enslavement. Then the attempt to create a VLAN on top of the same bridge is not vetoed, because the bridge is not related to mlxsw, and the selftest fails. Fix by disabling automatic IPv6 address generation for the bridges in this selftest, thus exempting them from the mlxsw router attention. Signed-off-by: Petr Machata <petrm@...dia.com> Reviewed-by: Amit Cohen <amcohen@...dia.com> --- tools/testing/selftests/drivers/net/mlxsw/q_in_q_veto.sh | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/tools/testing/selftests/drivers/net/mlxsw/q_in_q_veto.sh b/tools/testing/selftests/drivers/net/mlxsw/q_in_q_veto.sh index 7edaed8eb86a..00d55b0e98c1 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/q_in_q_veto.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/q_in_q_veto.sh @@ -48,6 +48,7 @@ create_vlan_upper_on_top_of_bridge() ip link add dev br0 type bridge vlan_filtering 1 \ vlan_protocol $bridge_proto vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 addrgenmode none ip link set dev br0 up ip link set dev $swp1 master br0 @@ -88,6 +89,7 @@ create_8021ad_vlan_upper_on_top_bridge_port() ip link add dev br0 type bridge vlan_filtering 1 \ vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 addrgenmode none ip link set dev $swp1 master br0 ip link set dev br0 up @@ -155,6 +157,7 @@ create_vlan_upper_on_top_front_panel_enslaved_to_8021ad_bridge() ip link add dev br0 type bridge vlan_filtering 1 \ vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 addrgenmode none ip link set dev br0 up ip link set dev $swp1 master br0 @@ -177,6 +180,7 @@ create_vlan_upper_on_top_lag_enslaved_to_8021ad_bridge() ip link add dev br0 type bridge vlan_filtering 1 \ vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 addrgenmode none ip link set dev br0 up ip link add name bond1 type bond mode 802.3ad @@ -203,6 +207,7 @@ enslave_front_panel_with_vlan_upper_to_8021ad_bridge() ip link add dev br0 type bridge vlan_filtering 1 \ vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 addrgenmode none ip link set dev br0 up ip link add name $swp1.100 link $swp1 type vlan id 100 @@ -225,6 +230,7 @@ enslave_lag_with_vlan_upper_to_8021ad_bridge() ip link add dev br0 type bridge vlan_filtering 1 \ vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 addrgenmode none ip link set dev br0 up ip link add name bond1 type bond mode 802.3ad @@ -252,6 +258,7 @@ add_ip_address_to_8021ad_bridge() ip link add dev br0 type bridge vlan_filtering 1 \ vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 addrgenmode none ip link set dev br0 up ip link set dev $swp1 master br0 @@ -273,6 +280,7 @@ switch_bridge_protocol_from_8021q_to_8021ad() ip link add dev br0 type bridge vlan_filtering 1 \ vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 addrgenmode none ip link set dev br0 up ip link set dev $swp1 master br0 -- 2.40.1
Powered by blists - more mailing lists