netdev - Re: [PATCH net-next 3/3] net: dsa: microchip: fix writes to phy registers >= 0x10

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <c30235e8-a7bd-dac4-a42c-ed673991e4ab@rasmusvillemoes.dk>
Date: Wed, 21 Jun 2023 13:37:00 +0200
From: Rasmus Villemoes <linux@...musvillemoes.dk>
To: Andrew Lunn <andrew@...n.ch>
Cc: Woojung Huh <woojung.huh@...rochip.com>, UNGLinuxDriver@...rochip.com,
 Florian Fainelli <f.fainelli@...il.com>, Vladimir Oltean
 <olteanv@...il.com>, "David S. Miller" <davem@...emloft.net>,
 Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
 Paolo Abeni <pabeni@...hat.com>, netdev@...r.kernel.org,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next 3/3] net: dsa: microchip: fix writes to phy
 registers >= 0x10

On 20/06/2023 21.28, Andrew Lunn wrote:
> On Tue, Jun 20, 2023 at 01:38:54PM +0200, Rasmus Villemoes wrote:
>> According to the errata sheets for ksz9477 and ksz9567, writes to the
>> PHY registers 0x10-0x1f (i.e. those located at addresses 0xN120 to
>> 0xN13f) must be done as a 32 bit write to the 4-byte aligned address
>> containing the register, hence requires a RMW in order not to change
>> the adjacent PHY register.
> 
> ASIC engineers do see to come up with novel ways to break things.
> 
> I assume you have not seen real problems with this, which is why it is
> not for net and a Fixes: tag?

Well, not real problems yet, no. The back story is that I want/need to
implement support for "single LED mode" on the ksz9567, because our
board has two separate simple LEDs for link/activity, and not some
multi-color LED that can indicate speed/link/activity. So that means
writing a 1 to bit 4 of MMD reg 2/0, but due to an errata, _also_
writing a 1 to bit 9 of phy register 0x1e, and when one wants to do
that, this errata applies.

Rasmus