[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230621132914.412546-26-mkl@pengutronix.de>
Date: Wed, 21 Jun 2023 15:29:06 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net,
kuba@...nel.org,
linux-can@...r.kernel.org,
kernel@...gutronix.de,
Jimmy Assarsson <extja@...ser.com>,
Vincent Mailhol <mailhol.vincent@...adoo.fr>,
Marc Kleine-Budde <mkl@...gutronix.de>
Subject: [PATCH net-next 25/33] can: kvaser_pciefd: Remove SPI flash parameter read functionality
From: Jimmy Assarsson <extja@...ser.com>
Remove SPI flash parameter read functionality, since it's only used for
reading the interface CAN controller count.
This information is already read from a register, making the information
redundant.
Signed-off-by: Jimmy Assarsson <extja@...ser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@...adoo.fr>
Link: https://lore.kernel.org/all/20230529134248.752036-7-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@...gutronix.de>
---
drivers/net/can/Kconfig | 3 +-
drivers/net/can/kvaser_pciefd.c | 220 +-------------------------------
2 files changed, 5 insertions(+), 218 deletions(-)
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index b190007c01be..a5c5036dfb94 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -153,8 +153,7 @@ config CAN_JANZ_ICAN3
config CAN_KVASER_PCIEFD
depends on PCI
tristate "Kvaser PCIe FD cards"
- select CRC32
- help
+ help
This is a driver for the Kvaser PCI Express CAN FD family.
Supported devices:
diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c
index abb556fb5cb6..e24a8e77aef1 100644
--- a/drivers/net/can/kvaser_pciefd.c
+++ b/drivers/net/can/kvaser_pciefd.c
@@ -3,10 +3,10 @@
* Parts of this driver are based on the following:
* - Kvaser linux pciefd driver (version 5.25)
* - PEAK linux canfd driver
- * - Altera Avalon EPCS flash controller driver
*/
#include <linux/kernel.h>
+#include <linux/minmax.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/ethtool.h>
@@ -14,7 +14,6 @@
#include <linux/can/dev.h>
#include <linux/timer.h>
#include <linux/netdevice.h>
-#include <linux/crc32.h>
#include <linux/iopoll.h>
MODULE_LICENSE("Dual BSD/GPL");
@@ -78,13 +77,6 @@ MODULE_DESCRIPTION("CAN driver for Kvaser CAN/PCIe devices");
#define KVASER_PCIEFD_SRB_STAT_REG (KVASER_PCIEFD_SRB_BASE + 0x210)
#define KVASER_PCIEFD_SRB_RX_NR_PACKETS_REG (KVASER_PCIEFD_SRB_BASE + 0x214)
#define KVASER_PCIEFD_SRB_CTRL_REG (KVASER_PCIEFD_SRB_BASE + 0x218)
-/* EPCS flash controller registers */
-#define KVASER_PCIEFD_SPI_BASE 0x1fc00
-#define KVASER_PCIEFD_SPI_RX_REG KVASER_PCIEFD_SPI_BASE
-#define KVASER_PCIEFD_SPI_TX_REG (KVASER_PCIEFD_SPI_BASE + 0x4)
-#define KVASER_PCIEFD_SPI_STATUS_REG (KVASER_PCIEFD_SPI_BASE + 0x8)
-#define KVASER_PCIEFD_SPI_CTRL_REG (KVASER_PCIEFD_SPI_BASE + 0xc)
-#define KVASER_PCIEFD_SPI_SSEL_REG (KVASER_PCIEFD_SPI_BASE + 0x14)
#define KVASER_PCIEFD_IRQ_ALL_MSK 0x1f
#define KVASER_PCIEFD_IRQ_SRB BIT(4)
@@ -119,23 +111,6 @@ MODULE_DESCRIPTION("CAN driver for Kvaser CAN/PCIe devices");
/* DMA Enable */
#define KVASER_PCIEFD_SRB_CTRL_DMA_ENABLE BIT(0)
-/* EPCS flash controller definitions */
-#define KVASER_PCIEFD_CFG_IMG_SZ (64 * 1024)
-#define KVASER_PCIEFD_CFG_IMG_OFFSET (31 * 65536L)
-#define KVASER_PCIEFD_CFG_MAX_PARAMS 256
-#define KVASER_PCIEFD_CFG_MAGIC 0xcafef00d
-#define KVASER_PCIEFD_CFG_PARAM_MAX_SZ 24
-#define KVASER_PCIEFD_CFG_SYS_VER 1
-#define KVASER_PCIEFD_CFG_PARAM_NR_CHAN 130
-#define KVASER_PCIEFD_SPI_TMT BIT(5)
-#define KVASER_PCIEFD_SPI_TRDY BIT(6)
-#define KVASER_PCIEFD_SPI_RRDY BIT(7)
-#define KVASER_PCIEFD_FLASH_ID_EPCS16 0x14
-/* Commands for controlling the onboard flash */
-#define KVASER_PCIEFD_FLASH_RES_CMD 0xab
-#define KVASER_PCIEFD_FLASH_READ_CMD 0x3
-#define KVASER_PCIEFD_FLASH_STATUS_CMD 0x5
-
/* Kvaser KCAN definitions */
#define KVASER_PCIEFD_KCAN_CTRL_EFLUSH (4 << 29)
#define KVASER_PCIEFD_KCAN_CTRL_EFRAME (5 << 29)
@@ -306,20 +281,6 @@ static const struct can_bittiming_const kvaser_pciefd_bittiming_const = {
.brp_inc = 1,
};
-struct kvaser_pciefd_cfg_param {
- __le32 magic;
- __le32 nr;
- __le32 len;
- u8 data[KVASER_PCIEFD_CFG_PARAM_MAX_SZ];
-};
-
-struct kvaser_pciefd_cfg_img {
- __le32 version;
- __le32 magic;
- __le32 crc;
- struct kvaser_pciefd_cfg_param params[KVASER_PCIEFD_CFG_MAX_PARAMS];
-};
-
static struct pci_device_id kvaser_pciefd_id_table[] = {
{ PCI_DEVICE(KVASER_PCIEFD_VENDOR, KVASER_PCIEFD_4HS_ID), },
{ PCI_DEVICE(KVASER_PCIEFD_VENDOR, KVASER_PCIEFD_2HS_ID), },
@@ -330,164 +291,6 @@ static struct pci_device_id kvaser_pciefd_id_table[] = {
};
MODULE_DEVICE_TABLE(pci, kvaser_pciefd_id_table);
-/* Onboard flash memory functions */
-static int kvaser_pciefd_spi_wait_loop(struct kvaser_pciefd *pcie, int msk)
-{
- u32 res;
-
- return readl_poll_timeout(pcie->reg_base + KVASER_PCIEFD_SPI_STATUS_REG,
- res, res & msk, 0, 10);
-}
-
-static int kvaser_pciefd_spi_cmd(struct kvaser_pciefd *pcie, const u8 *tx,
- u32 tx_len, u8 *rx, u32 rx_len)
-{
- int c;
-
- iowrite32(BIT(0), pcie->reg_base + KVASER_PCIEFD_SPI_SSEL_REG);
- iowrite32(BIT(10), pcie->reg_base + KVASER_PCIEFD_SPI_CTRL_REG);
- ioread32(pcie->reg_base + KVASER_PCIEFD_SPI_RX_REG);
-
- c = tx_len;
- while (c--) {
- if (kvaser_pciefd_spi_wait_loop(pcie, KVASER_PCIEFD_SPI_TRDY))
- return -EIO;
-
- iowrite32(*tx++, pcie->reg_base + KVASER_PCIEFD_SPI_TX_REG);
-
- if (kvaser_pciefd_spi_wait_loop(pcie, KVASER_PCIEFD_SPI_RRDY))
- return -EIO;
-
- ioread32(pcie->reg_base + KVASER_PCIEFD_SPI_RX_REG);
- }
-
- c = rx_len;
- while (c-- > 0) {
- if (kvaser_pciefd_spi_wait_loop(pcie, KVASER_PCIEFD_SPI_TRDY))
- return -EIO;
-
- iowrite32(0, pcie->reg_base + KVASER_PCIEFD_SPI_TX_REG);
-
- if (kvaser_pciefd_spi_wait_loop(pcie, KVASER_PCIEFD_SPI_RRDY))
- return -EIO;
-
- *rx++ = ioread32(pcie->reg_base + KVASER_PCIEFD_SPI_RX_REG);
- }
-
- if (kvaser_pciefd_spi_wait_loop(pcie, KVASER_PCIEFD_SPI_TMT))
- return -EIO;
-
- iowrite32(0, pcie->reg_base + KVASER_PCIEFD_SPI_CTRL_REG);
-
- if (c != -1) {
- dev_err(&pcie->pci->dev, "Flash SPI transfer failed\n");
- return -EIO;
- }
-
- return 0;
-}
-
-static int kvaser_pciefd_cfg_read_and_verify(struct kvaser_pciefd *pcie,
- struct kvaser_pciefd_cfg_img *img)
-{
- int offset = KVASER_PCIEFD_CFG_IMG_OFFSET;
- int res, crc;
- u8 *crc_buff;
-
- u8 cmd[] = {
- KVASER_PCIEFD_FLASH_READ_CMD,
- (u8)((offset >> 16) & 0xff),
- (u8)((offset >> 8) & 0xff),
- (u8)(offset & 0xff)
- };
-
- res = kvaser_pciefd_spi_cmd(pcie, cmd, ARRAY_SIZE(cmd), (u8 *)img,
- KVASER_PCIEFD_CFG_IMG_SZ);
- if (res)
- return res;
-
- crc_buff = (u8 *)img->params;
-
- if (le32_to_cpu(img->version) != KVASER_PCIEFD_CFG_SYS_VER) {
- dev_err(&pcie->pci->dev,
- "Config flash corrupted, version number is wrong\n");
- return -ENODEV;
- }
-
- if (le32_to_cpu(img->magic) != KVASER_PCIEFD_CFG_MAGIC) {
- dev_err(&pcie->pci->dev,
- "Config flash corrupted, magic number is wrong\n");
- return -ENODEV;
- }
-
- crc = ~crc32_be(0xffffffff, crc_buff, sizeof(img->params));
- if (le32_to_cpu(img->crc) != crc) {
- dev_err(&pcie->pci->dev,
- "Stored CRC does not match flash image contents\n");
- return -EIO;
- }
-
- return 0;
-}
-
-static void kvaser_pciefd_cfg_read_params(struct kvaser_pciefd *pcie,
- struct kvaser_pciefd_cfg_img *img)
-{
- struct kvaser_pciefd_cfg_param *param;
-
- param = &img->params[KVASER_PCIEFD_CFG_PARAM_NR_CHAN];
- memcpy(&pcie->nr_channels, param->data, le32_to_cpu(param->len));
-}
-
-static int kvaser_pciefd_read_cfg(struct kvaser_pciefd *pcie)
-{
- int res;
- struct kvaser_pciefd_cfg_img *img;
-
- /* Read electronic signature */
- u8 cmd[] = {KVASER_PCIEFD_FLASH_RES_CMD, 0, 0, 0};
-
- res = kvaser_pciefd_spi_cmd(pcie, cmd, ARRAY_SIZE(cmd), cmd, 1);
- if (res)
- return -EIO;
-
- img = kmalloc(KVASER_PCIEFD_CFG_IMG_SZ, GFP_KERNEL);
- if (!img)
- return -ENOMEM;
-
- if (cmd[0] != KVASER_PCIEFD_FLASH_ID_EPCS16) {
- dev_err(&pcie->pci->dev,
- "Flash id is 0x%x instead of expected EPCS16 (0x%x)\n",
- cmd[0], KVASER_PCIEFD_FLASH_ID_EPCS16);
-
- res = -ENODEV;
- goto image_free;
- }
-
- cmd[0] = KVASER_PCIEFD_FLASH_STATUS_CMD;
- res = kvaser_pciefd_spi_cmd(pcie, cmd, 1, cmd, 1);
- if (res) {
- goto image_free;
- } else if (cmd[0] & 1) {
- res = -EIO;
- /* No write is ever done, the WIP should never be set */
- dev_err(&pcie->pci->dev, "Unexpected WIP bit set in flash\n");
- goto image_free;
- }
-
- res = kvaser_pciefd_cfg_read_and_verify(pcie, img);
- if (res) {
- res = -EIO;
- goto image_free;
- }
-
- kvaser_pciefd_cfg_read_params(pcie, img);
-
-image_free:
- kfree(img);
- return res;
-}
-
static void kvaser_pciefd_request_status(struct kvaser_pciefd_can *can)
{
u32 cmd;
@@ -1125,25 +928,10 @@ static int kvaser_pciefd_setup_dma(struct kvaser_pciefd *pcie)
static int kvaser_pciefd_setup_board(struct kvaser_pciefd *pcie)
{
u32 sysid, srb_status, build;
- u8 sysid_nr_chan;
- int ret;
-
- ret = kvaser_pciefd_read_cfg(pcie);
- if (ret)
- return ret;
sysid = ioread32(pcie->reg_base + KVASER_PCIEFD_SYSID_VERSION_REG);
- sysid_nr_chan = (sysid >> KVASER_PCIEFD_SYSID_NRCHAN_SHIFT) & 0xff;
- if (pcie->nr_channels != sysid_nr_chan) {
- dev_err(&pcie->pci->dev,
- "Number of channels does not match: %u vs %u\n",
- pcie->nr_channels,
- sysid_nr_chan);
- return -ENODEV;
- }
-
- if (pcie->nr_channels > KVASER_PCIEFD_MAX_CAN_CHANNELS)
- pcie->nr_channels = KVASER_PCIEFD_MAX_CAN_CHANNELS;
+ pcie->nr_channels = min(KVASER_PCIEFD_MAX_CAN_CHANNELS,
+ ((sysid >> KVASER_PCIEFD_SYSID_NRCHAN_SHIFT) & 0xff));
build = ioread32(pcie->reg_base + KVASER_PCIEFD_SYSID_BUILD_REG);
dev_dbg(&pcie->pci->dev, "Version %u.%u.%u\n",
@@ -1167,7 +955,7 @@ static int kvaser_pciefd_setup_board(struct kvaser_pciefd *pcie)
/* Turn off all loopback functionality */
iowrite32(0, pcie->reg_base + KVASER_PCIEFD_LOOP_REG);
- return ret;
+ return 0;
}
static int kvaser_pciefd_handle_data_packet(struct kvaser_pciefd *pcie,
--
2.40.1
Powered by blists - more mailing lists