netdev - Re: [PATCH] s390/net: lcs: use IS_ENABLED() for kconfig detection

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZJMc3oS2nxORPASN@corigine.com>
Date: Wed, 21 Jun 2023 17:53:02 +0200
From: Simon Horman <simon.horman@...igine.com>
To: Randy Dunlap <rdunlap@...radead.org>
Cc: linux-kernel@...r.kernel.org, Alexandra Winter <wintera@...ux.ibm.com>,
	Wenjia Zhang <wenjia@...ux.ibm.com>, linux-s390@...r.kernel.org,
	netdev@...r.kernel.org, Heiko Carstens <hca@...ux.ibm.com>,
	Vasily Gorbik <gor@...ux.ibm.com>,
	Alexander Gordeev <agordeev@...ux.ibm.com>,
	Christian Borntraeger <borntraeger@...ux.ibm.com>,
	Sven Schnelle <svens@...ux.ibm.com>
Subject: Re: [PATCH] s390/net: lcs: use IS_ENABLED() for kconfig detection

On Tue, Jun 20, 2023 at 07:35:17PM -0700, Randy Dunlap wrote:
> Hi,
> 
> On 6/15/23 15:21, Randy Dunlap wrote:
> > When CONFIG_ETHERNET=m or CONFIG_FDDI=m, lcs.s has build errors or
> > warnings:
> > 
> > ../drivers/s390/net/lcs.c:40:2: error: #error Cannot compile lcs.c without some net devices switched on.
> >    40 | #error Cannot compile lcs.c without some net devices switched on.
> > ../drivers/s390/net/lcs.c: In function 'lcs_startlan_auto':
> > ../drivers/s390/net/lcs.c:1601:13: warning: unused variable 'rc' [-Wunused-variable]
> >  1601 |         int rc;
> > 
> > Solve this by using IS_ENABLED(CONFIG_symbol) instead of ifdef
> > CONFIG_symbol. The latter only works for builtin (=y) values
> > while IS_ENABLED() works for builtin or modular values.
> > 
> > Signed-off-by: Randy Dunlap <rdunlap@...radead.org>
> > Cc: Alexandra Winter <wintera@...ux.ibm.com>
> > Cc: Wenjia Zhang <wenjia@...ux.ibm.com>
> > Cc: linux-s390@...r.kernel.org
> > Cc: netdev@...r.kernel.org
> > Cc: Heiko Carstens <hca@...ux.ibm.com>
> > Cc: Vasily Gorbik <gor@...ux.ibm.com>
> > Cc: Alexander Gordeev <agordeev@...ux.ibm.com>
> > Cc: Christian Borntraeger <borntraeger@...ux.ibm.com>
> > Cc: Sven Schnelle <svens@...ux.ibm.com>
> > ---
> >  drivers/s390/net/lcs.c |   10 +++++-----
> >  1 file changed, 5 insertions(+), 5 deletions(-)
> > 
> > diff -- a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
> > --- a/drivers/s390/net/lcs.c
> > +++ b/drivers/s390/net/lcs.c
> > @@ -36,7 +36,7 @@
> >  #include "lcs.h"
> >  
> >  
> > -#if !defined(CONFIG_ETHERNET) && !defined(CONFIG_FDDI)
> > +#if !IS_ENABLED(CONFIG_ETHERNET) && !IS_ENABLED(CONFIG_FDDI)
> >  #error Cannot compile lcs.c without some net devices switched on.
> >  #endif
> >  
> > @@ -1601,14 +1601,14 @@ lcs_startlan_auto(struct lcs_card *card)
> >  	int rc;
> >  
> >  	LCS_DBF_TEXT(2, trace, "strtauto");
> > -#ifdef CONFIG_ETHERNET
> > +#if IS_ENABLED(CONFIG_ETHERNET)
> >  	card->lan_type = LCS_FRAME_TYPE_ENET;
> >  	rc = lcs_send_startlan(card, LCS_INITIATOR_TCPIP);
> >  	if (rc == 0)
> >  		return 0;
> >  
> >  #endif
> > -#ifdef CONFIG_FDDI
> > +#if IS_ENABLED(CONFIG_FDDI)
> >  	card->lan_type = LCS_FRAME_TYPE_FDDI;
> >  	rc = lcs_send_startlan(card, LCS_INITIATOR_TCPIP);
> >  	if (rc == 0)
> > @@ -2139,13 +2139,13 @@ lcs_new_device(struct ccwgroup_device *c
> >  		goto netdev_out;
> >  	}
> >  	switch (card->lan_type) {
> > -#ifdef CONFIG_ETHERNET
> > +#if IS_ENABLED(CONFIG_ETHERNET)
> >  	case LCS_FRAME_TYPE_ENET:
> >  		card->lan_type_trans = eth_type_trans;
> >  		dev = alloc_etherdev(0);
> >  		break;
> >  #endif
> > -#ifdef CONFIG_FDDI
> > +#if IS_ENABLED(CONFIG_FDDI)
> >  	case LCS_FRAME_TYPE_FDDI:
> >  		card->lan_type_trans = fddi_type_trans;
> >  		dev = alloc_fddidev(0);
> 
> 
> kernel test robot reports build errors from this patch when
> ETHERNET=y, FDDI=m, LCS=y:
> 
>   https://lore.kernel.org/all/202306202129.pl0AqK8G-lkp@intel.com/
> 
> Since the code before my patch expected (supported) FDDI=y only
> (by checking for CONFIG_FDDI only and not checking for CONFIG_FDDI_MODULE),
> the best solution that I can see is to enforce that expectation in
> drivers/s390/net/Kconfig:
> 
> diff -- a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
> --- a/drivers/s390/net/Kconfig
> +++ b/drivers/s390/net/Kconfig
> @@ -5,7 +5,7 @@ menu "S/390 network device drivers"
>  config LCS
>  	def_tristate m
>  	prompt "Lan Channel Station Interface"
> -	depends on CCW && NETDEVICES && (ETHERNET || FDDI)
> +	depends on CCW && NETDEVICES && (ETHERNET || FDDI = y)

Hi Randy,

Unfortunately I don't think this helps.
In the config given at the link above, ETHERNET is y.
And the error regarding fddi_type_trans and alloc_fddidev being undefined
seems to occur regardless of your change.

I did have better luck with this.

diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index 9c67b97faba2..303220251495 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -6,6 +6,7 @@ config LCS
        def_tristate m
        prompt "Lan Channel Station Interface"
        depends on CCW && NETDEVICES && (ETHERNET || FDDI)
+       depends on FDDI=y || FDDI=n
        help
          Select this option if you want to use LCS networking on IBM System z.
          This device driver supports FDDI (IEEE 802.7) and Ethernet.

I am assuming that LCS=m and FDDI=m can't work at runtime
because there is no guarantee that FDDI is loaded before LCS.
But I could well be wrong here.

>  	help
>  	  Select this option if you want to use LCS networking on IBM System z.
>  	  This device driver supports FDDI (IEEE 802.7) and Ethernet.
> 
> What do people think of that change?
> Any other ideas/suggestions?
> 
> thanks.
> -- 
> ~Randy
>