| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230621092653.23172-1-ansuelsmth@gmail.com> Date: Wed, 21 Jun 2023 11:26:53 +0200 From: Christian Marangi <ansuelsmth@...il.com> To: Andrew Lunn <andrew@...n.ch>, Lee Jones <lee@...nel.org>, linux-leds@...r.kernel.org, netdev@...r.kernel.org, linux-kernel@...r.kernel.org Cc: Christian Marangi <ansuelsmth@...il.com> Subject: [net-next PATCH] docs: ABI: sysfs-class-led-trigger-netdev: add new modes and entry Document newly introduced modes and entry for the LED netdev trigger. Add documentation for new modes: - link_10 - link_100 - link_1000 - half_duplex - full_duplex Add documentation for new entry: - hw_control Also add additional info for the interval entry and the tx/rx modes with the special case of hw_control ON. Signed-off-by: Christian Marangi <ansuelsmth@...il.com> --- .../testing/sysfs-class-led-trigger-netdev | 89 +++++++++++++++++++ 1 file changed, 89 insertions(+) diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev index 646540950e38..78b62a23b14a 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev @@ -13,6 +13,11 @@ Description: Specifies the duration of the LED blink in milliseconds. Defaults to 50 ms. + With hw_control ON, the interval value MUST be set to the + default value and cannot be changed. + Trying to set any value in this specific mode will return + an EINVAL error. + What: /sys/class/leds/<led>/link Date: Dec 2017 KernelVersion: 4.16 @@ -39,6 +44,9 @@ Description: If set to 1, the LED will blink for the milliseconds specified in interval to signal transmission. + With hw_control ON, the blink interval is controlled by hardware + and won't reflect the value set in interval. + What: /sys/class/leds/<led>/rx Date: Dec 2017 KernelVersion: 4.16 @@ -50,3 +58,84 @@ Description: If set to 1, the LED will blink for the milliseconds specified in interval to signal reception. + + With hw_control ON, the blink interval is controlled by hardware + and won't reflect the value set in interval. + +What: /sys/class/leds/<led>/hw_control +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@...r.kernel.org +Description: + Communicate whether the LED trigger modes are driven by hardware + or software fallback is used. + + If 0, the LED is using software fallback to blink. + + If 1, the LED is using hardware control to blink and signal the + requested modes. + +What: /sys/class/leds/<led>/link_10 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@...r.kernel.org +Description: + Signal the link speed state of 10Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 10MBps of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/link_100 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@...r.kernel.org +Description: + Signal the link speed state of 100Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 100Mbps of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/link_1000 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@...r.kernel.org +Description: + Signal the link speed state of 1000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 1000Mbps of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/half_duplex +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@...r.kernel.org +Description: + Signal the link half duplex state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link half + duplex state of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/full_duplex +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@...r.kernel.org +Description: + Signal the link full duplex state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link full + duplex state of the named network device. + Setting this value also immediately changes the LED state. -- 2.40.1
Powered by blists - more mailing lists