lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230622184422.4e72vtqk53nnx42g@halaney-x13s>
Date: Thu, 22 Jun 2023 13:44:22 -0500
From: Andrew Halaney <ahalaney@...hat.com>
To: Bartosz Golaszewski <brgl@...ev.pl>
Cc: Andy Gross <agross@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
	Konrad Dybcio <konrad.dybcio@...aro.org>,
	Rob Herring <robh+dt@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Richard Cochran <richardcochran@...il.com>,
	linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
	Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: Re: [RESEND PATCH v2 0/5] arm64: dts: qcom: enable ethernet on
 sa8775p-ride

On Thu, Jun 22, 2023 at 02:01:37PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
> 
> Bjorn,
> 
> Now that all other bits and pieces are in next, I'm resending the reviewed
> DTS patches for pick up. This enables one of the 1Gb ethernet ports on
> sa8775p-ride.
> 
> Bartosz Golaszewski (5):
>   arm64: dts: qcom: sa8775p: add the SGMII PHY node
>   arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface
>   arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY
>   arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0
>   arm64: dts: qcom: sa8775p-ride: enable ethernet0
> 
>  arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 109 ++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi     |  42 +++++++++
>  2 files changed, 151 insertions(+)
> 
> -- 
> 2.39.2
> 

Tested-by: Andrew Halaney <ahalaney@...hat.com>

note, I did uncover a bug in stmmac (imo) wrt unbalanced calls to
serdes_powerup/serdes_powerdown() which I plan on trying to fix shortly.

Not really related to any of the Qualcomm specific bits though. This
looks good to me.

You can trigger the bug I mentioned by removing the dwmac-qcom-ethqos module:

    [  174.893710] ------------[ cut here ]------------
    [  174.898459] unbalanced disables for vreg_l5a
    [  174.902868] WARNING: CPU: 5 PID: 584 at drivers/regulator/core.c:2996 _regulator_disable+0xe8/0x1c8
    [  174.912150] Modules linked in: r8152 rfkill marvell dwmac_qcom_ethqos(-) stmmac_platform stmmac qcom_pon crct10dif_ce spi_geni_qcom i2c_qcom_geni phy_qcom_qmp_usb pcs_xpcs phy_qcom_snps_femto_v2 qcom_wdt socinfo fuse ufs_qcom phy_qcom_qmp_ufs
    [  174.934171] CPU: 5 PID: 584 Comm: modprobe Not tainted 6.4.0-rc7-next-20230622-00006-gb4d4b58e3c81-dirty #29
    [  174.944250] Hardware name: Qualcomm SA8775P Ride (DT)
    [  174.949438] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    [  174.956578] pc : _regulator_disable+0xe8/0x1c8
    [  174.961143] lr : _regulator_disable+0xe8/0x1c8
    [  174.965709] sp : ffff800082c13b50
    [  174.969114] x29: ffff800082c13b50 x28: ffff592b4c692d00 x27: 0000000000000000
    [  174.976431] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
    [  174.983750] x23: ffff592b40dd8c90 x22: ffff592b40f47490 x21: ffff592b41a72000
    [  174.991067] x20: ffff592b409c6900 x19: ffff592b409c6900 x18: 0000000000000006
    [  174.998385] x17: 3630333230322d74 x16: ffffcc489c71e6f8 x15: ffff800082c135d0
    [  175.005702] x14: 0000000000000000 x13: 61356c5f67657276 x12: 20726f662073656c
    [  175.013019] x11: fffffffffffe0000 x10: ffffcc489ea33488 x9 : ffffcc489c27aa10
    [  175.020336] x8 : 00000000ffffefff x7 : ffffcc489ea33488 x6 : 80000000fffff000
    [  175.027654] x5 : ffff5939bb92acc8 x4 : 0000000000000000 x3 : 0000000000000000
    [  175.034971] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff592b4c692d00
    [  175.042289] Call trace:
    [  175.044802]  _regulator_disable+0xe8/0x1c8
    [  175.049010]  regulator_disable+0x4c/0x98
    [  175.053040]  phy_power_off+0x90/0xe0
    [  175.056714]  qcom_ethqos_serdes_powerdown+0x28/0x48 [dwmac_qcom_ethqos]
    [  175.063510]  stmmac_dvr_remove+0xa0/0x178 [stmmac]
    [  175.068440]  stmmac_pltfr_remove+0x2c/0x80 [stmmac_platform]
    [  175.074255]  platform_remove+0x34/0x80
    [  175.078107]  device_remove+0x54/0x90
    [  175.081783]  device_release_driver_internal+0x1dc/0x240
    [  175.087150]  driver_detach+0x58/0xa8
    [  175.090824]  bus_remove_driver+0x74/0xd0
    [  175.094856]  driver_unregister+0x38/0x70
    [  175.098887]  platform_driver_unregister+0x1c/0x30
    [  175.103721]  qcom_ethqos_driver_exit+0x18/0x1b8 [dwmac_qcom_ethqos]
    [  175.110160]  __arm64_sys_delete_module+0x1a8/0x298
    [  175.115082]  invoke_syscall+0x50/0x128
    [  175.118936]  el0_svc_common.constprop.0+0xcc/0xf8
    [  175.123770]  do_el0_svc+0x40/0xa8
    [  175.127178]  el0_svc+0x2c/0x88
    [  175.130318]  el0t_64_sync_handler+0x100/0x130
    [  175.134795]  el0t_64_sync+0x190/0x198
    [  175.138560] ---[ end trace 0000000000000000 ]---
    [root@...p19-243-249 ~]# 

Just dumping the stack on serdes_powerdown/up calls you get the
following:

    [    6.179584] qcom-ethqos 23040000.ethernet eth0: PHY [stmmac-0:08] driver [Marvell 88E1510] (irq=POLL)
    [    6.189571] CPU: 0 PID: 323 Comm: NetworkManager Not tainted 6.4.0-rc7-next-20230622-00006-gb4d4b58e3c81-dirty #29
    [    6.200192] Hardware name: Qualcomm SA8775P Ride (DT)
    [    6.205373] Call trace:
    [    6.207896]  dump_backtrace+0x9c/0x100
    [    6.211752]  show_stack+0x20/0x38
    [    6.215160]  dump_stack_lvl+0x48/0x60
    [    6.218929]  dump_stack+0x18/0x28
    [    6.222335]  qcom_ethqos_serdes_powerup+0x20/0x70 [dwmac_qcom_ethqos]
    [    6.228957]  __stmmac_open+0x138/0x488 [stmmac]
    [    6.233634]  stmmac_open+0x4c/0xe8 [stmmac]
    [    6.237948]  __dev_open+0x108/0x1e8
    [    6.241535]  __dev_change_flags+0x194/0x218
    [    6.245834]  dev_change_flags+0x2c/0x80
    [    6.249778]  do_setlink+0x2b0/0xef8
    [    6.253363]  __rtnl_newlink+0x514/0x870
    [    6.257305]  rtnl_newlink+0x58/0x90
    [    6.260891]  rtnetlink_rcv_msg+0x134/0x390
    [    6.265100]  netlink_rcv_skb+0x64/0x138
    [    6.269046]  rtnetlink_rcv+0x20/0x38
    [    6.272721]  netlink_unicast+0x2f0/0x350
    [    6.276755]  netlink_sendmsg+0x1b0/0x430
    [    6.280789]  ____sys_sendmsg+0x1d8/0x2c8
    [    6.284826]  ___sys_sendmsg+0xb4/0x110
    [    6.288680]  __sys_sendmsg+0x8c/0xf0
    [    6.292357]  __arm64_sys_sendmsg+0x2c/0x40
    [    6.296570]  invoke_syscall+0x50/0x128
    [    6.300424]  el0_svc_common.constprop.0+0xcc/0xf8
    [    6.305253]  do_el0_svc+0x40/0xa8
    [    6.308662]  el0_svc+0x2c/0x88
    [    6.311804]  el0t_64_sync_handler+0x100/0x130
    [    6.316285]  el0t_64_sync+0x190/0x198
    <snip>
    [root@...p19-243-249 ~]# modprobe -r dwmac_qcom_ethqos
    [  174.562075] qcom-ethqos 23040000.ethernet eth0: stmmac_dvr_remove: removing driver
    [  174.570660] stmmac_pcs: Link Down
    [  174.580082] CPU: 5 PID: 584 Comm: modprobe Not tainted 6.4.0-rc7-next-20230622-00006-gb4d4b58e3c81-dirty #29
    [  174.590176] Hardware name: Qualcomm SA8775P Ride (DT)
    [  174.595363] Call trace:
    [  174.597881]  dump_backtrace+0x9c/0x100
    [  174.601744]  show_stack+0x20/0x38
    [  174.605154]  dump_stack_lvl+0x48/0x60
    [  174.608926]  dump_stack+0x18/0x28
    [  174.612339]  qcom_ethqos_serdes_powerdown+0x20/0x48 [dwmac_qcom_ethqos]
    [  174.619138]  stmmac_release+0x234/0x2e0 [stmmac]
    [  174.623893]  __dev_close_many+0xb4/0x160
    [  174.627920]  dev_close_many+0x8c/0x140
    [  174.631777]  unregister_netdevice_many_notify+0x140/0x7a0
    [  174.637320]  unregister_netdevice_queue+0xa0/0xe8
    [  174.642151]  unregister_netdev+0x2c/0x48
    [  174.646179]  stmmac_dvr_remove+0x88/0x178 [stmmac]
    [  174.651109]  stmmac_pltfr_remove+0x2c/0x80 [stmmac_platform]
    [  174.656925]  platform_remove+0x34/0x80
    [  174.660786]  device_remove+0x54/0x90
    [  174.664468]  device_release_driver_internal+0x1dc/0x240
    [  174.669834]  driver_detach+0x58/0xa8
    [  174.673514]  bus_remove_driver+0x74/0xd0
    [  174.677552]  driver_unregister+0x38/0x70
    [  174.681578]  platform_driver_unregister+0x1c/0x30
    [  174.686408]  qcom_ethqos_driver_exit+0x18/0x1b8 [dwmac_qcom_ethqos]
    [  174.692847]  __arm64_sys_delete_module+0x1a8/0x298
    [  174.697767]  invoke_syscall+0x50/0x128
    [  174.701617]  el0_svc_common.constprop.0+0xcc/0xf8
    [  174.706449]  do_el0_svc+0x40/0xa8
    [  174.709864]  el0_svc+0x2c/0x88
    [  174.713009]  el0t_64_sync_handler+0x100/0x130
    [  174.717482]  el0t_64_sync+0x190/0x198
    [  174.721919] qcom-ethqos 23040000.ethernet eth0: FPE workqueue stop
    [  174.779478] CPU: 5 PID: 584 Comm: modprobe Not tainted 6.4.0-rc7-next-20230622-00006-gb4d4b58e3c81-dirty #29
    [  174.789565] Hardware name: Qualcomm SA8775P Ride (DT)
    [  174.794754] Call trace:
    [  174.797267]  dump_backtrace+0x9c/0x100
    [  174.801123]  show_stack+0x20/0x38
    [  174.804528]  dump_stack_lvl+0x48/0x60
    [  174.808295]  dump_stack+0x18/0x28
    [  174.811700]  qcom_ethqos_serdes_powerdown+0x20/0x48 [dwmac_qcom_ethqos]
    [  174.818497]  stmmac_dvr_remove+0xa0/0x178 [stmmac]
    [  174.823429]  stmmac_pltfr_remove+0x2c/0x80 [stmmac_platform]
    [  174.829245]  platform_remove+0x34/0x80
    [  174.833097]  device_remove+0x54/0x90
    [  174.836772]  device_release_driver_internal+0x1dc/0x240
    [  174.842138]  driver_detach+0x58/0xa8
    [  174.845810]  bus_remove_driver+0x74/0xd0
    [  174.849841]  driver_unregister+0x38/0x70
    [  174.853870]  platform_driver_unregister+0x1c/0x30
    [  174.858702]  qcom_ethqos_driver_exit+0x18/0x1b8 [dwmac_qcom_ethqos]
    [  174.865140]  __arm64_sys_delete_module+0x1a8/0x298
    [  174.870061]  invoke_syscall+0x50/0x128
    [  174.873913]  el0_svc_common.constprop.0+0xcc/0xf8
    [  174.878745]  do_el0_svc+0x40/0xa8
    [  174.882153]  el0_svc+0x2c/0x88
    [  174.885292]  el0t_64_sync_handler+0x100/0x130
    [  174.889768]  el0t_64_sync+0x190/0x198

Need to figure out which one of those serdes_powerdown() calls to undo.

Thanks,
Andrew


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ