lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1qChb8-00Fmrr-GU@rmk-PC.armlinux.org.uk>
Date: Fri, 23 Jun 2023 15:17:14 +0100
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>
Cc: Alexandre Belloni <alexandre.belloni@...tlin.com>,
	AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
	"Ar__n__ __NAL" <arinc.unal@...nc9.com>,
	Claudiu Manoil <claudiu.manoil@....com>,
	Daniel Golle <daniel@...rotopia.org>,
	"David S. Miller" <davem@...emloft.net>,
	DENG Qingfang <dqfext@...il.com>,
	Eric Dumazet <edumazet@...gle.com>,
	Florian Fainelli <f.fainelli@...il.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Landen Chao <Landen.Chao@...iatek.com>,
	linux-arm-kernel@...ts.infradead.org,
	linux-mediatek@...ts.infradead.org,
	Matthias Brugger <matthias.bgg@...il.com>,
	netdev@...r.kernel.org,
	Paolo Abeni <pabeni@...hat.com>,
	Sean Wang <sean.wang@...iatek.com>,
	UNGLinuxDriver@...rochip.com,
	Vladimir Oltean <olteanv@...il.com>
Subject: [PATCH RFC net-next 05/14] net: dsa: mv88e6xxx: remove handling for
 DSA and CPU ports

As we now always use a fixed-link for DSA and CPU ports, we no longer
need the hack in the Marvell code to make this work. Remove it.

This is especially important with the conversion of DSA drivers to
phylink_pcs, as the PCS code only gets called if we are using
phylink for the port.

Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 48 ++++----------------------------
 1 file changed, 5 insertions(+), 43 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 8b51756bd805..42c325409ac4 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3315,56 +3315,17 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port)
 {
 	struct device_node *phy_handle = NULL;
 	struct dsa_switch *ds = chip->ds;
-	phy_interface_t mode;
 	struct dsa_port *dp;
-	int tx_amp, speed;
+	int tx_amp;
 	int err;
 	u16 reg;
 
 	chip->ports[port].chip = chip;
 	chip->ports[port].port = port;
 
-	dp = dsa_to_port(ds, port);
-
-	/* MAC Forcing register: don't force link, speed, duplex or flow control
-	 * state to any particular values on physical ports, but force the CPU
-	 * port and all DSA ports to their maximum bandwidth and full duplex.
-	 */
-	if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) {
-		struct phylink_config pl_config = {};
-		unsigned long caps;
-
-		chip->info->ops->phylink_get_caps(chip, port, &pl_config);
-
-		caps = pl_config.mac_capabilities;
-
-		if (chip->info->ops->port_max_speed_mode)
-			mode = chip->info->ops->port_max_speed_mode(chip, port);
-		else
-			mode = PHY_INTERFACE_MODE_NA;
-
-		if (caps & MAC_10000FD)
-			speed = SPEED_10000;
-		else if (caps & MAC_5000FD)
-			speed = SPEED_5000;
-		else if (caps & MAC_2500FD)
-			speed = SPEED_2500;
-		else if (caps & MAC_1000)
-			speed = SPEED_1000;
-		else if (caps & MAC_100)
-			speed = SPEED_100;
-		else
-			speed = SPEED_10;
-
-		err = mv88e6xxx_port_setup_mac(chip, port, LINK_FORCED_UP,
-					       speed, DUPLEX_FULL,
-					       PAUSE_OFF, mode);
-	} else {
-		err = mv88e6xxx_port_setup_mac(chip, port, LINK_UNFORCED,
-					       SPEED_UNFORCED, DUPLEX_UNFORCED,
-					       PAUSE_ON,
-					       PHY_INTERFACE_MODE_NA);
-	}
+	err = mv88e6xxx_port_setup_mac(chip, port, LINK_UNFORCED,
+				       SPEED_UNFORCED, DUPLEX_UNFORCED,
+				       PAUSE_ON, PHY_INTERFACE_MODE_NA);
 	if (err)
 		return err;
 
@@ -3541,6 +3502,7 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port)
 	}
 
 	if (chip->info->ops->serdes_set_tx_amplitude) {
+		dp = dsa_to_port(ds, port);
 		if (dp)
 			phy_handle = of_parse_phandle(dp->dn, "phy-handle", 0);
 
-- 
2.30.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ