| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230623-send-net-next-20230623-v1-4-a883213c8ba9@kernel.org>
Date: Fri, 23 Jun 2023 10:34:10 -0700
From: Mat Martineau <martineau@...nel.org>
To: Matthieu Baerts <matthieu.baerts@...sares.net>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>
Cc: netdev@...r.kernel.org, mptcp@...ts.linux.dev,
Mat Martineau <martineau@...nel.org>, Geliang Tang <geliang.tang@...e.com>
Subject: [PATCH net-next 4/8] selftests: mptcp: drop test_linkfail
parameter
From: Geliang Tang <geliang.tang@...e.com>
run_tests() accepts too many optional parameters. Before this modification,
it was required to set all of then when only the last one had to be
changed. That's not clear to see all these 0 and it makes the maintenance
harder:
run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow
Instead, the parameter can be set as an env var with a limited scope:
foo=1 bar=2 next=3 \
run_tests $ns1 $ns2 10.0.1.1 slow
This patch switches to key/value "test_linkfail=*" instead of positional
parameter test_linkfail of do_transfer() and run_tests().
Reviewed-by: Matthieu Baerts <matthieu.baerts@...sares.net>
Signed-off-by: Geliang Tang <geliang.tang@...e.com>
Signed-off-by: Mat Martineau <martineau@...nel.org>
---
tools/testing/selftests/net/mptcp/mptcp_join.sh | 192 ++++++++++++------------
1 file changed, 99 insertions(+), 93 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 000c561bf622..bc6a26d357bb 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -50,6 +50,7 @@ TEST_NAME=""
nr_blank=40
export FAILING_LINKS=""
+export test_linkfail=0
# generated using "nfbpf_compile '(ip && (ip[54] & 0xf0) == 0x30) ||
# (ip6 && (ip6[74] & 0xf0) == 0x30)'"
@@ -825,11 +826,10 @@ do_transfer()
local cl_proto="$3"
local srv_proto="$4"
local connect_addr="$5"
- local test_link_fail="$6"
- local addr_nr_ns1="$7"
- local addr_nr_ns2="$8"
- local speed="$9"
- local sflags="${10}"
+ local addr_nr_ns1="$6"
+ local addr_nr_ns2="$7"
+ local speed="$8"
+ local sflags="${9}"
local port=$((10000 + TEST_COUNT - 1))
local cappid
@@ -874,21 +874,21 @@ do_transfer()
local extra_srv_args=""
local trunc_size=""
if [[ "${addr_nr_ns2}" = "fastclose_"* ]]; then
- if [ ${test_link_fail} -le 1 ]; then
- echo "fastclose tests need test_link_fail argument"
+ if [ ${test_linkfail} -le 1 ]; then
+ echo "fastclose tests need test_linkfail argument"
fail_test
return 1
fi
# disconnect
- trunc_size=${test_link_fail}
+ trunc_size=${test_linkfail}
local side=${addr_nr_ns2:10}
if [ ${side} = "client" ]; then
- extra_cl_args="-f ${test_link_fail}"
+ extra_cl_args="-f ${test_linkfail}"
extra_srv_args="-f -1"
elif [ ${side} = "server" ]; then
- extra_srv_args="-f ${test_link_fail}"
+ extra_srv_args="-f ${test_linkfail}"
extra_cl_args="-f -1"
else
echo "wrong/unknown fastclose spec ${side}"
@@ -902,7 +902,7 @@ do_transfer()
fi
extra_srv_args="$extra_args $extra_srv_args"
- if [ "$test_link_fail" -gt 1 ];then
+ if [ "$test_linkfail" -gt 1 ];then
timeout ${timeout_test} \
ip netns exec ${listener_ns} \
./mptcp_connect -t ${timeout_poll} -l -p $port -s ${srv_proto} \
@@ -918,12 +918,12 @@ do_transfer()
wait_local_port_listen "${listener_ns}" "${port}"
extra_cl_args="$extra_args $extra_cl_args"
- if [ "$test_link_fail" -eq 0 ];then
+ if [ "$test_linkfail" -eq 0 ];then
timeout ${timeout_test} \
ip netns exec ${connector_ns} \
./mptcp_connect -t ${timeout_poll} -p $port -s ${cl_proto} \
$extra_cl_args $connect_addr < "$cin" > "$cout" &
- elif [ "$test_link_fail" -eq 1 ] || [ "$test_link_fail" -eq 2 ];then
+ elif [ "$test_linkfail" -eq 1 ] || [ "$test_linkfail" -eq 2 ];then
( cat "$cinfail" ; sleep 2; link_failure $listener_ns ; cat "$cinfail" ) | \
tee "$cinsent" | \
timeout ${timeout_test} \
@@ -1107,13 +1107,13 @@ do_transfer()
return 1
fi
- if [ "$test_link_fail" -gt 1 ];then
+ if [ "$test_linkfail" -gt 1 ];then
check_transfer $sinfail $cout "file received by client" $trunc_size
else
check_transfer $sin $cout "file received by client" $trunc_size
fi
retc=$?
- if [ "$test_link_fail" -eq 0 ];then
+ if [ "$test_linkfail" -eq 0 ];then
check_transfer $cin $sout "file received by server" $trunc_size
else
check_transfer $cinsent $sout "file received by server" $trunc_size
@@ -1146,11 +1146,10 @@ run_tests()
local listener_ns="$1"
local connector_ns="$2"
local connect_addr="$3"
- local test_linkfail="${4:-0}"
- local addr_nr_ns1="${5:-0}"
- local addr_nr_ns2="${6:-0}"
- local speed="${7:-fast}"
- local sflags="${8:-""}"
+ local addr_nr_ns1="${4:-0}"
+ local addr_nr_ns2="${5:-0}"
+ local speed="${6:-fast}"
+ local sflags="${7:-""}"
local size
@@ -1195,7 +1194,7 @@ run_tests()
fi
do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr} \
- ${test_linkfail} ${addr_nr_ns1} ${addr_nr_ns2} ${speed} ${sflags}
+ ${addr_nr_ns1} ${addr_nr_ns2} ${speed} ${sflags}
}
dump_stats()
@@ -1984,7 +1983,7 @@ subflows_error_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
+ run_tests $ns1 $ns2 10.0.1.1 0 0 slow
chk_join_nr 0 0 0
fi
@@ -1995,7 +1994,7 @@ subflows_error_tests()
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
+ run_tests $ns1 $ns2 10.0.1.1 0 0 slow
chk_join_nr 1 1 1
fi
@@ -2006,7 +2005,7 @@ subflows_error_tests()
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
+ run_tests $ns1 $ns2 10.0.1.1 0 0 slow
chk_join_nr 1 1 1
fi
@@ -2018,7 +2017,7 @@ subflows_error_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow &
+ run_tests $ns1 $ns2 10.0.1.1 0 0 slow &
# mpj subflow will be in TW after the reset
wait_attempt_fail $ns2
@@ -2117,7 +2116,7 @@ signal_address_tests()
# the peer could possibly miss some addr notification, allow retransmission
ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
+ run_tests $ns1 $ns2 10.0.1.1 0 0 slow
# It is not directly linked to the commit introducing this
# symbol but for the parent one which is linked anyway.
@@ -2149,7 +2148,8 @@ link_failure_tests()
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 1
+ test_linkfail=1 \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 3 3 3
chk_add_nr 1 1
chk_stale_nr $ns2 1 5 1
@@ -2164,7 +2164,8 @@ link_failure_tests()
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 2
+ test_linkfail=2 \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 3 3 3
chk_add_nr 1 1
chk_stale_nr $ns2 1 -1 1
@@ -2178,8 +2179,8 @@ link_failure_tests()
pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
- FAILING_LINKS="1" \
- run_tests $ns1 $ns2 10.0.1.1 1
+ FAILING_LINKS="1" test_linkfail=1 \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 2 2 2
chk_add_nr 1 1
chk_link_usage $ns2 ns2eth3 $cinsent 0
@@ -2193,8 +2194,8 @@ link_failure_tests()
pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
- FAILING_LINKS="1 2" \
- run_tests $ns1 $ns2 10.0.1.1 1
+ FAILING_LINKS="1 2" test_linkfail=1 \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 2 2 2
chk_add_nr 1 1
chk_stale_nr $ns2 2 4 2
@@ -2209,8 +2210,8 @@ link_failure_tests()
pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup
- FAILING_LINKS="1 2" \
- run_tests $ns1 $ns2 10.0.1.1 2
+ FAILING_LINKS="1 2" test_linkfail=2 \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 2 2 2
chk_add_nr 1 1
chk_stale_nr $ns2 1 -1 2
@@ -2225,7 +2226,7 @@ add_addr_timeout_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
+ run_tests $ns1 $ns2 10.0.1.1 0 0 slow
chk_join_nr 1 1 1
chk_add_tx_nr 4 4
chk_add_nr 4 0
@@ -2236,7 +2237,7 @@ add_addr_timeout_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
- run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
+ run_tests $ns1 $ns2 dead:beef:1::1 0 0 slow
chk_join_nr 1 1 1
chk_add_nr 4 0
fi
@@ -2247,7 +2248,7 @@ add_addr_timeout_tests()
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_set_limits $ns2 2 2
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 speed_10
+ run_tests $ns1 $ns2 10.0.1.1 0 0 speed_10
chk_join_nr 2 2 2
chk_add_nr 8 0
fi
@@ -2258,7 +2259,7 @@ add_addr_timeout_tests()
pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_set_limits $ns2 2 2
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 speed_10
+ run_tests $ns1 $ns2 10.0.1.1 0 0 speed_10
chk_join_nr 1 1 1
chk_add_nr 8 0
fi
@@ -2271,7 +2272,7 @@ remove_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 0 0 -1 slow
+ run_tests $ns1 $ns2 10.0.1.1 0 -1 slow
chk_join_nr 1 1 1
chk_rm_tx_nr 1
chk_rm_nr 1 1
@@ -2283,7 +2284,7 @@ remove_tests()
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 0 0 -2 slow
+ run_tests $ns1 $ns2 10.0.1.1 0 -2 slow
chk_join_nr 2 2 2
chk_rm_nr 2 2
fi
@@ -2293,7 +2294,7 @@ remove_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 1
- run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow
+ run_tests $ns1 $ns2 10.0.1.1 -1 0 slow
chk_join_nr 1 1 1
chk_add_nr 1 1
chk_rm_nr 1 1 invert
@@ -2305,7 +2306,7 @@ remove_tests()
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow
+ run_tests $ns1 $ns2 10.0.1.1 -1 -1 slow
chk_join_nr 2 2 2
chk_add_nr 1 1
chk_rm_nr 1 1
@@ -2318,7 +2319,7 @@ remove_tests()
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 0 -1 -2 speed_10
+ run_tests $ns1 $ns2 10.0.1.1 -1 -2 speed_10
chk_join_nr 3 3 3
chk_add_nr 1 1
chk_rm_nr 2 2
@@ -2331,7 +2332,7 @@ remove_tests()
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
pm_nl_set_limits $ns2 3 3
- run_tests $ns1 $ns2 10.0.1.1 0 -3 0 speed_10
+ run_tests $ns1 $ns2 10.0.1.1 -3 0 speed_10
chk_join_nr 3 3 3
chk_add_nr 3 3
chk_rm_nr 3 3 invert
@@ -2344,7 +2345,7 @@ remove_tests()
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
pm_nl_set_limits $ns2 3 3
- run_tests $ns1 $ns2 10.0.1.1 0 -3 0 speed_10
+ run_tests $ns1 $ns2 10.0.1.1 -3 0 speed_10
chk_join_nr 1 1 1
chk_add_nr 3 3
chk_rm_nr 3 1 invert
@@ -2357,7 +2358,7 @@ remove_tests()
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
+ run_tests $ns1 $ns2 10.0.1.1 -8 -8 slow
chk_join_nr 3 3 3
chk_add_nr 1 1
chk_rm_nr 1 3 invert simult
@@ -2370,7 +2371,7 @@ remove_tests()
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow id 150
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
+ run_tests $ns1 $ns2 10.0.1.1 -8 -8 slow
chk_join_nr 3 3 3
if mptcp_lib_kversion_ge 5.18; then
@@ -2388,7 +2389,7 @@ remove_tests()
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
pm_nl_set_limits $ns2 3 3
- run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
+ run_tests $ns1 $ns2 10.0.1.1 -8 -8 slow
chk_join_nr 3 3 3
chk_add_nr 3 3
chk_rm_nr 3 3 invert simult
@@ -2401,7 +2402,7 @@ remove_tests()
pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
pm_nl_set_limits $ns2 3 3
- run_tests $ns1 $ns2 10.0.1.1 0 -8 0 slow
+ run_tests $ns1 $ns2 10.0.1.1 -8 0 slow
chk_join_nr 1 1 1
chk_add_nr 3 3
chk_rm_nr 3 1 invert
@@ -2412,7 +2413,7 @@ remove_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 0 0 -9 slow
+ run_tests $ns1 $ns2 10.0.1.1 0 -9 slow
chk_join_nr 1 1 1
chk_rm_nr 1 1
fi
@@ -2422,7 +2423,7 @@ remove_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 1
- run_tests $ns1 $ns2 10.0.1.1 0 -9 0 slow
+ run_tests $ns1 $ns2 10.0.1.1 -9 0 slow
chk_join_nr 1 1 1
chk_add_nr 1 1
chk_rm_nr 1 1 invert
@@ -2435,7 +2436,7 @@ add_tests()
if reset "add single subflow"; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
- run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow
+ run_tests $ns1 $ns2 10.0.1.1 0 1 slow
chk_join_nr 1 1 1
fi
@@ -2443,7 +2444,7 @@ add_tests()
if reset "add signal address"; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
- run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow
+ run_tests $ns1 $ns2 10.0.1.1 1 0 slow
chk_join_nr 1 1 1
chk_add_nr 1 1
fi
@@ -2452,7 +2453,7 @@ add_tests()
if reset "add multiple subflows"; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
- run_tests $ns1 $ns2 10.0.1.1 0 0 2 slow
+ run_tests $ns1 $ns2 10.0.1.1 0 2 slow
chk_join_nr 2 2 2
fi
@@ -2460,7 +2461,7 @@ add_tests()
if reset "add multiple subflows IPv6"; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
- run_tests $ns1 $ns2 dead:beef:1::1 0 0 2 slow
+ run_tests $ns1 $ns2 dead:beef:1::1 0 2 slow
chk_join_nr 2 2 2
fi
@@ -2468,7 +2469,7 @@ add_tests()
if reset "add multiple addresses IPv6"; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 2 2
- run_tests $ns1 $ns2 dead:beef:1::1 0 2 0 slow
+ run_tests $ns1 $ns2 dead:beef:1::1 2 0 slow
chk_join_nr 2 2 2
chk_add_nr 2 2
fi
@@ -2481,14 +2482,14 @@ ipv6_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow
- run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
+ run_tests $ns1 $ns2 dead:beef:1::1 0 0 slow
chk_join_nr 1 1 1
fi
# add_address, unused IPv6
if reset "unused signal address IPv6"; then
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
- run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
+ run_tests $ns1 $ns2 dead:beef:1::1 0 0 slow
chk_join_nr 0 0 0
chk_add_nr 1 1
fi
@@ -2498,7 +2499,7 @@ ipv6_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
pm_nl_set_limits $ns2 1 1
- run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
+ run_tests $ns1 $ns2 dead:beef:1::1 0 0 slow
chk_join_nr 1 1 1
chk_add_nr 1 1
fi
@@ -2508,7 +2509,7 @@ ipv6_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
pm_nl_set_limits $ns2 1 1
- run_tests $ns1 $ns2 dead:beef:1::1 0 -1 0 slow
+ run_tests $ns1 $ns2 dead:beef:1::1 -1 0 slow
chk_join_nr 1 1 1
chk_add_nr 1 1
chk_rm_nr 1 1 invert
@@ -2520,7 +2521,7 @@ ipv6_tests()
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow
- run_tests $ns1 $ns2 dead:beef:1::1 0 -1 -1 slow
+ run_tests $ns1 $ns2 dead:beef:1::1 -1 -1 slow
chk_join_nr 2 2 2
chk_add_nr 1 1
chk_rm_nr 1 1
@@ -2621,7 +2622,7 @@ mixed_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
+ run_tests $ns1 $ns2 10.0.1.1 0 0 slow
chk_join_nr 0 0 0
fi
@@ -2631,7 +2632,7 @@ mixed_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns1 10.0.1.1 flags signal
- run_tests $ns1 $ns2 dead:beef:2::1 0 0 0 slow
+ run_tests $ns1 $ns2 dead:beef:2::1 0 0 slow
chk_join_nr 1 1 1
fi
@@ -2642,7 +2643,7 @@ mixed_tests()
pm_nl_set_limits $ns2 1 4
pm_nl_add_endpoint $ns2 dead:beef:2::2 flags subflow,fullmesh
pm_nl_add_endpoint $ns1 10.0.1.1 flags signal
- run_tests $ns1 $ns2 dead:beef:2::1 0 0 0 slow
+ run_tests $ns1 $ns2 dead:beef:2::1 0 0 slow
chk_join_nr 1 1 1
fi
@@ -2654,7 +2655,7 @@ mixed_tests()
pm_nl_set_limits $ns2 2 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
- run_tests $ns1 $ns2 dead:beef:1::1 0 0 fullmesh_1 slow
+ run_tests $ns1 $ns2 dead:beef:1::1 0 fullmesh_1 slow
chk_join_nr 4 4 4
fi
}
@@ -2667,7 +2668,7 @@ backup_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow nobackup
+ run_tests $ns1 $ns2 10.0.1.1 0 0 slow nobackup
chk_join_nr 1 1 1
chk_prio_nr 0 1
fi
@@ -2678,7 +2679,7 @@ backup_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
pm_nl_set_limits $ns2 1 1
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
+ run_tests $ns1 $ns2 10.0.1.1 0 0 slow backup
chk_join_nr 1 1 1
chk_add_nr 1 1
chk_prio_nr 1 1
@@ -2690,7 +2691,7 @@ backup_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_set_limits $ns2 1 1
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
+ run_tests $ns1 $ns2 10.0.1.1 0 0 slow backup
chk_join_nr 1 1 1
chk_add_nr 1 1
chk_prio_nr 1 1
@@ -2699,7 +2700,7 @@ backup_tests()
if reset "mpc backup" &&
continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
+ run_tests $ns1 $ns2 10.0.1.1 0 0 slow
chk_join_nr 0 0 0
chk_prio_nr 0 1
fi
@@ -2708,7 +2709,7 @@ backup_tests()
continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow,backup
pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
+ run_tests $ns1 $ns2 10.0.1.1 0 0 slow
chk_join_nr 0 0 0
chk_prio_nr 1 1
fi
@@ -2716,7 +2717,7 @@ backup_tests()
if reset "mpc switch to backup" &&
continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
+ run_tests $ns1 $ns2 10.0.1.1 0 0 slow backup
chk_join_nr 0 0 0
chk_prio_nr 0 1
fi
@@ -2725,7 +2726,7 @@ backup_tests()
continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow
pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
+ run_tests $ns1 $ns2 10.0.1.1 0 0 slow backup
chk_join_nr 0 0 0
chk_prio_nr 1 1
fi
@@ -2814,7 +2815,7 @@ add_addr_ports_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_set_limits $ns2 1 1
- run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow
+ run_tests $ns1 $ns2 10.0.1.1 -1 0 slow
chk_join_nr 1 1 1
chk_add_nr 1 1 1
chk_rm_nr 1 1 invert
@@ -2830,7 +2831,7 @@ add_addr_ports_tests()
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
pm_nl_set_limits $ns2 1 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow
+ run_tests $ns1 $ns2 10.0.1.1 -1 -1 slow
chk_join_nr 2 2 2
chk_add_nr 1 1 1
chk_rm_nr 1 1
@@ -2843,7 +2844,7 @@ add_addr_ports_tests()
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 0 -8 -2 slow
+ run_tests $ns1 $ns2 10.0.1.1 -8 -2 slow
chk_join_nr 3 3 3
chk_add_nr 1 1
chk_rm_nr 1 3 invert simult
@@ -3045,7 +3046,7 @@ fullmesh_tests()
pm_nl_set_limits $ns2 1 4
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,fullmesh
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,fullmesh
- run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow
+ run_tests $ns1 $ns2 10.0.1.1 1 0 slow
chk_join_nr 4 4 4
chk_add_nr 1 1
fi
@@ -3057,7 +3058,7 @@ fullmesh_tests()
pm_nl_set_limits $ns1 1 3
pm_nl_set_limits $ns2 1 3
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
- run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_1 slow
+ run_tests $ns1 $ns2 10.0.1.1 0 fullmesh_1 slow
chk_join_nr 3 3 3
chk_add_nr 1 1
fi
@@ -3069,7 +3070,7 @@ fullmesh_tests()
pm_nl_set_limits $ns1 2 5
pm_nl_set_limits $ns2 1 5
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
- run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_2 slow
+ run_tests $ns1 $ns2 10.0.1.1 0 fullmesh_2 slow
chk_join_nr 5 5 5
chk_add_nr 1 1
fi
@@ -3082,7 +3083,7 @@ fullmesh_tests()
pm_nl_set_limits $ns1 2 4
pm_nl_set_limits $ns2 1 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
- run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_2 slow
+ run_tests $ns1 $ns2 10.0.1.1 0 fullmesh_2 slow
chk_join_nr 4 4 4
chk_add_nr 1 1
fi
@@ -3093,7 +3094,7 @@ fullmesh_tests()
pm_nl_set_limits $ns1 4 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow
pm_nl_set_limits $ns2 4 4
- run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow fullmesh
+ run_tests $ns1 $ns2 10.0.1.1 0 1 slow fullmesh
chk_join_nr 2 2 2
chk_rm_nr 0 1
fi
@@ -3104,7 +3105,7 @@ fullmesh_tests()
pm_nl_set_limits $ns1 4 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow,fullmesh
pm_nl_set_limits $ns2 4 4
- run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_1 slow nofullmesh
+ run_tests $ns1 $ns2 10.0.1.1 0 fullmesh_1 slow nofullmesh
chk_join_nr 2 2 2
chk_rm_nr 0 1
fi
@@ -3115,7 +3116,7 @@ fullmesh_tests()
pm_nl_set_limits $ns1 4 4
pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow
pm_nl_set_limits $ns2 4 4
- run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow backup,fullmesh
+ run_tests $ns1 $ns2 10.0.1.1 0 1 slow backup,fullmesh
chk_join_nr 2 2 2
chk_prio_nr 0 1
chk_rm_nr 0 1
@@ -3127,7 +3128,7 @@ fullmesh_tests()
pm_nl_set_limits $ns1 4 4
pm_nl_set_limits $ns2 4 4
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup,fullmesh
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow nobackup,nofullmesh
+ run_tests $ns1 $ns2 10.0.1.1 0 0 slow nobackup,nofullmesh
chk_join_nr 2 2 2
chk_prio_nr 0 1
chk_rm_nr 0 1
@@ -3137,14 +3138,16 @@ fullmesh_tests()
fastclose_tests()
{
if reset_check_counter "fastclose test" "MPTcpExtMPFastcloseTx"; then
- run_tests $ns1 $ns2 10.0.1.1 1024 0 fastclose_client
+ test_linkfail=1024 \
+ run_tests $ns1 $ns2 10.0.1.1 0 fastclose_client
chk_join_nr 0 0 0
chk_fclose_nr 1 1
chk_rst_nr 1 1 invert
fi
if reset_check_counter "fastclose server test" "MPTcpExtMPFastcloseRx"; then
- run_tests $ns1 $ns2 10.0.1.1 1024 0 fastclose_server
+ test_linkfail=1024 \
+ run_tests $ns1 $ns2 10.0.1.1 0 fastclose_server
chk_join_nr 0 0 0
chk_fclose_nr 1 1 invert
chk_rst_nr 1 1
@@ -3162,7 +3165,8 @@ fail_tests()
{
# single subflow
if reset_with_fail "Infinite map" 1; then
- run_tests $ns1 $ns2 10.0.1.1 128
+ test_linkfail=128 \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 0 0 0 +1 +0 1 0 1 "$(pedit_action_pkts)"
chk_fail_nr 1 -1 invert
fi
@@ -3173,7 +3177,8 @@ fail_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.2.2 dev ns2eth2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 1024
+ test_linkfail=1024 \
+ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr 1 1 1 1 0 1 1 0 "$(pedit_action_pkts)"
fi
}
@@ -3298,7 +3303,7 @@ userspace_tests()
pm_nl_set_limits $ns1 1 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
+ run_tests $ns1 $ns2 10.0.1.1 0 0 slow backup
chk_join_nr 1 1 0
chk_prio_nr 0 0
fi
@@ -3311,7 +3316,7 @@ userspace_tests()
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 0 0 -1 slow
+ run_tests $ns1 $ns2 10.0.1.1 0 -1 slow
chk_join_nr 0 0 0
chk_rm_nr 0 0
fi
@@ -3321,7 +3326,7 @@ userspace_tests()
continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
set_userspace_pm $ns1
pm_nl_set_limits $ns2 1 1
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 speed_10 &
+ run_tests $ns1 $ns2 10.0.1.1 0 0 speed_10 &
local tests_pid=$!
wait_mpj $ns1
userspace_pm_add_addr 10.0.2.1 10
@@ -3341,7 +3346,7 @@ userspace_tests()
continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
set_userspace_pm $ns2
pm_nl_set_limits $ns1 0 1
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 speed_10 &
+ run_tests $ns1 $ns2 10.0.1.1 0 0 speed_10 &
local tests_pid=$!
wait_mpj $ns2
userspace_pm_add_sf 10.0.3.2 20
@@ -3364,7 +3369,7 @@ endpoint_tests()
pm_nl_set_limits $ns1 2 2
pm_nl_set_limits $ns2 2 2
pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
- run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow 2>/dev/null &
+ run_tests $ns1 $ns2 10.0.1.1 0 0 slow 2>/dev/null &
wait_mpj $ns1
pm_nl_check_endpoint 1 "creation" \
@@ -3387,7 +3392,8 @@ endpoint_tests()
pm_nl_set_limits $ns1 1 1
pm_nl_set_limits $ns2 1 1
pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow
- run_tests $ns1 $ns2 10.0.1.1 4 0 0 speed_20 2>/dev/null &
+ test_linkfail=4 \
+ run_tests $ns1 $ns2 10.0.1.1 0 0 speed_20 2>/dev/null &
wait_mpj $ns2
chk_subflow_nr needtitle "before delete" 2
--
2.41.0
Powered by blists - more mailing lists