lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230623204016.GA1060715-robh@kernel.org>
Date: Fri, 23 Jun 2023 14:40:16 -0600
From: Rob Herring <robh@...nel.org>
To: Rafał Miłecki <zajec5@...il.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>, Miquel Raynal <miquel.raynal@...tlin.com>, Christian Marangi <ansuelsmth@...il.com>, devicetree@...r.kernel.org, linux-mtd@...ts.infradead.org, linux-arm-kernel@...ts.infradead.org, netdev@...r.kernel.org, linux-kernel@...r.kernel.org, Rafał Miłecki <rafal@...ecki.pl>
Subject: Re: [PATCH] dt-bindings: nvmem: fixed-cell: add compatibles for MAC
 cells

On Fri, Jun 16, 2023 at 11:30:33PM +0200, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@...ecki.pl>
> 
> A lot of home routers have NVMEM fixed cells containing MAC address that
> need some further processing. In ~99% cases MAC needs to be:
> 1. Optionally parsed from ASCII format
> 2. Increased by a vendor-picked value
> 
> There was already an attempt to design a binding for that at NVMEM
> device level in the past. It wasn't accepted though as it didn't really
> fit NVMEM device layer.
> 
> The introduction of NVMEM fixed-cells layout seems to be an opportunity
> to provide a relevant binding in a clean way.
> 
> This commit adds two *generic* compatible strings: "mac-base" and
> "mac-ascii". As always those need to be carefully reviewed.
> 
> OpenWrt project currently supports ~300 home routers that would benefit
> from the "mac-base" binding. Those devices are manufactured by multiple
> vendors. There are TP-Link devices (76 of them), Netgear (19),
> D-Link (11), OpenMesh (9), EnGenius (8), GL.iNet (8), ZTE (7),
> Xiaomi (5), Ubiquiti (6) and more. Those devices don't share an
> architecture or SoC.
> 
> Amount of devices to benefit from the "mac-ascii" is hard to determine
> as not all of them were converted to DT yet. There are at least 200 of
> such devices.
> 
> It would be impractical to provide unique "compatible" strings for NVMEM
> layouts of all those devices. It seems like a valid case for allowing a
> generic binding instead. Even if this binding will not be sufficient for
> some further devices it seems to be useful enough as it is.

I'm generally okay with this approach as it's not trying to handle all 
permutations with properties. Anything odd can have a specific 
compatible easily.

> 
> Signed-off-by: Rafał Miłecki <rafal@...ecki.pl>
> ---
> If this binding gets approved I will still need a minor help with YAML.
> 
> For some reason my conditions in fixed-cell.yaml don't seem to work as
> expected. I tried to make "#nvmem-cell-cells" required only for the
> "mac-base" but it seems it got required for all cells:

Answer below.

>   DTC_CHK Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.example.dtb
> Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.example.dtb: nvmem-layout: calibration@...0: '#nvmem-cell-cells' is a required property
>         From schema: Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml
> 
> Cell "calibration" doesn't have any "compatible" so it shouldn't require
> "#nvmem-cell-cells".
> Can someone hint me what I did wrong, please?
> ---
>  .../bindings/nvmem/layouts/fixed-cell.yaml    | 35 +++++++++++++++++++
>  .../bindings/nvmem/layouts/fixed-layout.yaml  | 12 +++++++
>  .../devicetree/bindings/nvmem/nvmem.yaml      |  5 ++-
>  3 files changed, 51 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
> index e698098450e1..047e42438a4f 100644
> --- a/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
> +++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
> @@ -11,6 +11,17 @@ maintainers:
>    - Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
>  
>  properties:
> +  compatible:
> +    oneOf:
> +      - const: mac-base
> +        description: >
> +          Cell with base MAC address to be used for calculating extra relative
> +          addresses.
> +      - const: mac-ascii
> +        description: >
> +          Cell with base MAC address stored in an ASCII format (like
> +          "00:11:22:33:44:55").

Isn't ASCII detectable? Just look at the length or that all values are 
0x3?. Though I can't make sense of the lengths your examples have.

> +
>    reg:
>      maxItems: 1
>  
> @@ -25,6 +36,30 @@ properties:
>          description:
>            Size in bit within the address range specified by reg.
>  
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: mac-base

This will be true with no compatible property. You need 'required: [ 
compatible ]' in addition.

> +    then:
> +      properties:
> +        "#nvmem-cell-cells":
> +          description: The first argument is a MAC address offset.
> +          const: 1
> +      required:
> +        - "#nvmem-cell-cells"
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: mac-ascii
> +    then:
> +      properties:
> +        "#nvmem-cell-cells":
> +          description: The first argument is a MAC address offset.
> +          const: 1
> +
>  required:
>    - reg
>  
> diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml
> index c271537d0714..05b8230cd18c 100644
> --- a/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml
> +++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml
> @@ -44,6 +44,18 @@ examples:
>          #address-cells = <1>;
>          #size-cells = <1>;
>  
> +        mac@100 {
> +            compatible = "mac-base";
> +            reg = <0x100 0xc>;
> +            #nvmem-cell-cells = <1>;
> +        };
> +
> +        mac@110 {
> +            compatible = "mac-ascii";
> +            reg = <0x110 0x11>;
> +            #nvmem-cell-cells = <1>;
> +        };
> +
>          calibration@...0 {
>              reg = <0x4000 0x100>;
>          };
> diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
> index 980244100690..9f921d940142 100644
> --- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
> +++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
> @@ -49,7 +49,10 @@ properties:
>  patternProperties:
>    "@[0-9a-f]+(,[0-7])?$":
>      type: object
> -    $ref: layouts/fixed-cell.yaml
> +    allOf:
> +      - $ref: layouts/fixed-cell.yaml
> +      - properties:
> +          compatible: false
>      deprecated: true
>  
>  additionalProperties: true
> -- 
> 2.35.3
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ