netdev - Re: Fwd: After kernel 6.3.7 or 6.3.8 b43 driver fails

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <02659cdf-753b-442d-f110-1f92619d55c7@lwfinger.net>
Date: Mon, 26 Jun 2023 19:31:04 -0500
From: Larry Finger <Larry.Finger@...inger.net>
To: Sardonimous <sardonimous@...mail.com>, Arnd Bergmann <arnd@...db.de>,
 Bagas Sanjaya <bagasdotme@...il.com>,
 Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
 Linux Regressions <regressions@...ts.linux.dev>,
 Linux Wireless <linux-wireless@...r.kernel.org>,
 Netdev <netdev@...r.kernel.org>
Cc: Michael Büsch <m@...s.ch>,
 kernel test robot <lkp@...el.com>, Simon Horman <simon.horman@...igine.com>,
 Kalle Valo <kvalo@...nel.org>
Subject: Re: Fwd: After kernel 6.3.7 or 6.3.8 b43 driver fails

On 6/26/23 16:33, Sardonimous wrote:
> 
> On 6/26/23 10:21 AM, Larry Finger wrote:
>> On 6/26/23 07:44, Sardonimous wrote:
>>> If I were to send you some test patches, could you create a kernel with them 
>>> applied?
>>>
>>> Doubtful.
>>
>> Sardonimous,
>>
>> OK, that essentially eliminates  getting DMA to work. The cost of a 
>> MacBookPro7 is too much for me to acquire one to debug that issue.
>>
>> On my PowerBook G4, I also got the failure to connect, thus I should be able 
>> to fix that problem, but getting a new kernel with the fix onto your machine 
>> will not be easy.
> 
> It might be possible to follow the arch instructions for patching the kernel
> 
> https://wiki.archlinux.org/title/Kernel/Arch_build_system
> 
> It takes about a day to rebuild the kernel following this procedure.
> 
>> Is it possible to ssh into your machine, or to use TeamViewer? Those questions 
>> do not need an answer now, but think about them.
> 
> This is complicated by being in a CGNAT environment.  I usually do this via 
> tailscale.  Will have to think about it.
> 
>> Larry
> 
> Should pio=1 qos=0 cause the problems that it does?  It if is no longer a 
> supported configuration, perhaps it should fail more gracefully.

Setting qos=0 will generate a harmless warning, but the network still works. 
Using pio=1 should still be supported.

I am bisecting the source. It will take a while as I still have 13 kernels to 
build and my PowerBook G4 takes about 6 hours per build - it is a lot slower 
than your computer. At this point, I know that kernel v6.1.0 works, and that 
v6.2.0-rc4 fails.

If you can find a 6.1 kernel, it should work for you. Once I know the fix, we 
can explore having you patch and rebuild your 6.3.X kernel.

Larry