netdev - Re: [net-next PATCH RFC] net: dsa: qca8k: make learning configurable and keep off if standalone

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230627094916.maywojwztzdek5y2@skbuf>
Date: Tue, 27 Jun 2023 12:49:16 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: Christian Marangi <ansuelsmth@...il.com>
Cc: Andrew Lunn <andrew@...n.ch>, Florian Fainelli <f.fainelli@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Atin Bainada <hi@...nb.me>, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [net-next PATCH RFC] net: dsa: qca8k: make learning configurable
 and keep off if standalone

On Mon, Jun 26, 2023 at 07:59:41PM +0200, Christian Marangi wrote:
> > Hmm, so ping works but this doesn't? That's strange, because send_uc_ipv4()
> > also pings. Have you run with bash -x to see why it fails?
> > 
> 
> I just run with bash -x and I also mod the script to not delete the
> tcpdump. Limiting the script to only this test the dump is just 2 ICMPv6
> packet and no output from tcpdump aside from
> 
> tcpdump: listening on lan1, link-type EN10MB (Ethernet), snapshot length 65535 bytes
> 3 packets captured
> 5 packets received by filter
> 0 packets dropped by kernel
> 
> I feel like this is important so I think I should focus on understanding
> why this doesn't work? Any clue?

No clue. I'd put a "bash" instruction in send_uc_ipv4(), which would act
as a sort of break point for the script (opens an interactive sub-shell),
then run it again with bash -x, manually repeat the command that failed,
investigate why it failed and hit Ctrl-d when I'm done.