| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 29 Jun 2023 23:00:06 +0200
From: Paweł Dembicki <paweldembicki@...il.com>
To: Vladimir Oltean <olteanv@...il.com>
Cc: netdev@...r.kernel.org, Linus Walleij <linus.walleij@...aro.org>,
Andrew Lunn <andrew@...n.ch>, Florian Fainelli <f.fainelli@...il.com>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next v2 4/7] net: dsa: vsc73xx: Add dsa tagging based
on 8021q
niedz., 25 cze 2023 o 14:47 Vladimir Oltean <olteanv@...il.com> napisał(a):
>
> On Sun, Jun 25, 2023 at 01:53:39PM +0200, Pawel Dembicki wrote:
> > This patch is simple implementation of 8021q tagging in vsc73xx driver.
> > At this moment devices with DSA_TAG_PROTO_NONE are useless. VSC73XX
> > family doesn't provide any tag support for external ethernet ports.
> >
> > The only way is vlan-based tagging. It require constant hardware vlan
> > filtering. VSC73XX family support provider bridging but QinQ only without
> > fully implemented 802.1AD. It allow only doubled 0x8100 TPID.
> >
> > In simple port mode QinQ is enabled to preserve forwarding vlan tagged
> > frames.
> >
> > Tag driver introduce most simple funcionality required for proper taging
> > support.
> >
> > Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
> > Signed-off-by: Pawel Dembicki <paweldembicki@...il.com>
> > ---
> > v2:
> > - change poll loop into dedicated macro
> > - fix style issues
> >
> > drivers/net/dsa/Kconfig | 2 +-
> > drivers/net/dsa/vitesse-vsc73xx-core.c | 532 +++++++++++++++++++++----
> > include/net/dsa.h | 2 +
> > net/dsa/Kconfig | 6 +
> > net/dsa/Makefile | 1 +
> > net/dsa/tag_vsc73xx_8021q.c | 87 ++++
> > 6 files changed, 544 insertions(+), 86 deletions(-)
> > create mode 100644 net/dsa/tag_vsc73xx_8021q.c
> >
> > diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
> > index 3ed5391bb18d..4cf0166fef7b 100644
> > --- a/drivers/net/dsa/Kconfig
> > +++ b/drivers/net/dsa/Kconfig
> > @@ -125,7 +125,7 @@ config NET_DSA_SMSC_LAN9303_MDIO
> >
> > config NET_DSA_VITESSE_VSC73XX
> > tristate
> > - select NET_DSA_TAG_NONE
> > + select NET_DSA_TAG_VSC73XX
> > select FIXED_PHY
> > select VITESSE_PHY
> > select GPIOLIB
> > diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
> > index f123ce2ed244..f7c38f9a81a8 100644
> > --- a/drivers/net/dsa/vitesse-vsc73xx-core.c
> > +++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
> > @@ -17,6 +17,7 @@
> > #include <linux/kernel.h>
> > #include <linux/module.h>
> > #include <linux/device.h>
> > +#include <linux/iopoll.h>
> > #include <linux/of.h>
> > #include <linux/of_device.h>
> > #include <linux/of_mdio.h>
> > @@ -25,6 +26,7 @@
> > #include <linux/etherdevice.h>
> > #include <linux/gpio/consumer.h>
> > #include <linux/gpio/driver.h>
> > +#include <linux/dsa/8021q.h>
> > #include <linux/random.h>
> > #include <net/dsa.h>
> >
> > @@ -62,6 +64,8 @@
> > #define VSC73XX_CAT_DROP 0x6e
> > #define VSC73XX_CAT_PR_MISC_L2 0x6f
> > #define VSC73XX_CAT_PR_USR_PRIO 0x75
> > +#define VSC73XX_CAT_VLAN_MISC 0x79
> > +#define VSC73XX_CAT_PORT_VLAN 0x7a
> > #define VSC73XX_Q_MISC_CONF 0xdf
> >
> > /* MAC_CFG register bits */
> > @@ -122,6 +126,17 @@
> > #define VSC73XX_ADVPORTM_IO_LOOPBACK BIT(1)
> > #define VSC73XX_ADVPORTM_HOST_LOOPBACK BIT(0)
> >
> > +/* TXUPDCFG transmit modify setup bits */
> > +#define VSC73XX_TXUPDCFG_DSCP_REWR_MODE GENMASK(20, 19)
> > +#define VSC73XX_TXUPDCFG_DSCP_REWR_ENA BIT(18)
> > +#define VSC73XX_TXUPDCFG_TX_INT_TO_USRPRIO_ENA BIT(17)
> > +#define VSC73XX_TXUPDCFG_TX_UNTAGGED_VID GENMASK(15, 4)
> > +#define VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_ENA BIT(3)
> > +#define VSC73XX_TXUPDCFG_TX_UPDATE_CRC_CPU_ENA BIT(1)
> > +#define VSC73XX_TXUPDCFG_TX_INSERT_TAG BIT(0)
> > +
> > +#define VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_SHIFT 4
> > +
> > /* CAT_DROP categorizer frame dropping register bits */
> > #define VSC73XX_CAT_DROP_DROP_MC_SMAC_ENA BIT(6)
> > #define VSC73XX_CAT_DROP_FWD_CTRL_ENA BIT(4)
> > @@ -135,6 +150,15 @@
> > #define VSC73XX_Q_MISC_CONF_EARLY_TX_512 (1 << 1)
> > #define VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE BIT(0)
> >
> > +/* CAT_VLAN_MISC categorizer VLAN miscellaneous bits*/
> > +#define VSC73XX_CAT_VLAN_MISC_VLAN_TCI_IGNORE_ENA BIT(8)
> > +#define VSC73XX_CAT_VLAN_MISC_VLAN_KEEP_TAG_ENA BIT(7)
> > +
> > +/* CAT_PORT_VLAN categorizer port VLAN*/
> > +#define VSC73XX_CAT_PORT_VLAN_VLAN_CFI BIT(15)
> > +#define VSC73XX_CAT_PORT_VLAN_VLAN_USR_PRIO GENMASK(14, 12)
> > +#define VSC73XX_CAT_PORT_VLAN_VLAN_VID GENMASK(11, 0)
> > +
> > /* Frame analyzer block 2 registers */
> > #define VSC73XX_STORMLIMIT 0x02
> > #define VSC73XX_ADVLEARN 0x03
> > @@ -189,7 +213,8 @@
> > #define VSC73XX_VLANACCESS_VLAN_MIRROR BIT(29)
> > #define VSC73XX_VLANACCESS_VLAN_SRC_CHECK BIT(28)
> > #define VSC73XX_VLANACCESS_VLAN_PORT_MASK GENMASK(9, 2)
> > -#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK GENMASK(2, 0)
> > +#define VSC73XX_VLANACCESS_VLAN_PORT_MASK_SHIFT 2
> > +#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK GENMASK(1, 0)
> > #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_IDLE 0
> > #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_READ_ENTRY 1
> > #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_WRITE_ENTRY 2
> > @@ -344,6 +369,13 @@ static const struct vsc73xx_counter vsc73xx_tx_counters[] = {
> > { 29, "TxQoSClass3" }, /* non-standard counter */
> > };
> >
> > +enum vsc73xx_port_vlan_conf {
> > + VSC73XX_VLAN_UNAWARE,
> > + VSC73XX_VLAN_AWARE,
> > + VSC73XX_DOUBLE_VLAN_AWARE,
> > + VSC73XX_DOUBLE_VLAN_CPU_AWARE,
> > +};
> > +
> > int vsc73xx_is_addr_valid(u8 block, u8 subblock)
> > {
> > switch (block) {
> > @@ -558,90 +590,7 @@ static enum dsa_tag_protocol vsc73xx_get_tag_protocol(struct dsa_switch *ds,
> > * cannot access the tag. (See "Internal frame header" section
> > * 3.9.1 in the manual.)
> > */
> > - return DSA_TAG_PROTO_NONE;
> > -}
> > -
> > -static int vsc73xx_setup(struct dsa_switch *ds)
> > -{
> > - struct vsc73xx *vsc = ds->priv;
> > - int i;
> > -
> > - dev_info(vsc->dev, "set up the switch\n");
> > -
> > - /* Issue RESET */
> > - vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
> > - VSC73XX_GLORESET_MASTER_RESET);
> > - usleep_range(125, 200);
> > -
> > - /* Initialize memory, initialize RAM bank 0..15 except 6 and 7
> > - * This sequence appears in the
> > - * VSC7385 SparX-G5 datasheet section 6.6.1
> > - * VSC7395 SparX-G5e datasheet section 6.6.1
> > - * "initialization sequence".
> > - * No explanation is given to the 0x1010400 magic number.
> > - */
> > - for (i = 0; i <= 15; i++) {
> > - if (i != 6 && i != 7) {
> > - vsc73xx_write(vsc, VSC73XX_BLOCK_MEMINIT,
> > - 2,
> > - 0, 0x1010400 + i);
> > - mdelay(1);
> > - }
> > - }
> > - mdelay(30);
> > -
> > - /* Clear MAC table */
> > - vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
> > - VSC73XX_MACACCESS,
> > - VSC73XX_MACACCESS_CMD_CLEAR_TABLE);
> > -
> > - /* Clear VLAN table */
> > - vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
> > - VSC73XX_VLANACCESS,
> > - VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE);
> > -
> > - msleep(40);
> > -
> > - /* Use 20KiB buffers on all ports on VSC7395
> > - * The VSC7385 has 16KiB buffers and that is the
> > - * default if we don't set this up explicitly.
> > - * Port "31" is "all ports".
> > - */
> > - if (IS_739X(vsc))
> > - vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 0x1f,
> > - VSC73XX_Q_MISC_CONF,
> > - VSC73XX_Q_MISC_CONF_EXTENT_MEM);
> > -
> > - /* Put all ports into reset until enabled */
> > - for (i = 0; i < 7; i++) {
> > - if (i == 5)
> > - continue;
> > - vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 4,
> > - VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET);
> > - }
> > -
> > - /* MII delay, set both GTX and RX delay to 2 ns */
> > - vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY,
> > - VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS |
> > - VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS);
> > - /* IP multicast flood mask (table 144) */
> > - vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_IFLODMSK,
> > - 0xff);
> > -
> > - mdelay(50);
> > -
> > - /*configure forward map to CPU <-> port only*/
> > - for (i = 0; i < vsc->ds->num_ports; i++)
> > - vsc->forward_map[i] = VSC73XX_SRCMASKS_PORTS_MASK & BIT(CPU_PORT);
> > - vsc->forward_map[CPU_PORT] = VSC73XX_SRCMASKS_PORTS_MASK & ~BIT(CPU_PORT);
> > -
> > - /* Release reset from the internal PHYs */
> > - vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
> > - VSC73XX_GLORESET_PHY_RESET);
> > -
> > - udelay(4);
> > -
> > - return 0;
>
> Try to make this code movement part of a separate patch. It's
> distracting and makes it hard to see what really changed.
>
> > + return DSA_TAG_PROTO_VSC73XX_8021Q;
> > }
> >
> > static void vsc73xx_init_port(struct vsc73xx *vsc, int port)
> > @@ -1078,6 +1027,417 @@ static void vsc73xx_port_stp_state_set(struct dsa_switch *ds, int port,
> > VSC73XX_SRCMASKS_PORTS_MASK, 0);
> > }
> >
> > +static int
> > +vsc73xx_port_wait_for_vlan_table_cmd(struct vsc73xx *vsc)
> > +{
> > + u32 val;
> > + int ret, err;
> > +
> > + ret = read_poll_timeout(vsc73xx_read, err,
> > + err < 0 || ((val & VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK) ==
> > + VSC73XX_VLANACCESS_VLAN_TBL_CMD_IDLE),
> > + 1000, 10000, false, vsc, VSC73XX_BLOCK_ANALYZER,
> > + 0, VSC73XX_VLANACCESS, &val);
> > + if (ret)
> > + return ret;
> > + return err;
> > +}
> > +
> > +static int
> > +vsc73xx_port_read_vlan_table_entry(struct dsa_switch *ds, u16 vid, u8 *portmap)
> > +{
> > + struct vsc73xx *vsc = ds->priv;
> > + u32 val;
> > + int ret;
> > +
> > + if (vid > 4095)
> > + return -EPERM;
>
> Unnecessary defensive programming.
>
> > + vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANTIDX, vid);
> > + ret = vsc73xx_port_wait_for_vlan_table_cmd(vsc);
> > + if (ret)
> > + return ret;
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANACCESS,
> > + VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK,
> > + VSC73XX_VLANACCESS_VLAN_TBL_CMD_READ_ENTRY);
> > + ret = vsc73xx_port_wait_for_vlan_table_cmd(vsc);
> > + if (ret)
> > + return ret;
> > + vsc73xx_read(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANACCESS, &val);
> > + *portmap = (val & VSC73XX_VLANACCESS_VLAN_PORT_MASK) >>
> > + VSC73XX_VLANACCESS_VLAN_PORT_MASK_SHIFT;
> > + return 0;
> > +}
> > +
> > +static int
> > +vsc73xx_port_write_vlan_table_entry(struct dsa_switch *ds, u16 vid, u8 portmap)
> > +{
> > + struct vsc73xx *vsc = ds->priv;
> > + int ret;
> > +
> > + if (vid > 4095)
> > + return -EPERM;
>
> Unnecessary defensive programming.
>
> > + vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANTIDX, vid);
> > + ret = vsc73xx_port_wait_for_vlan_table_cmd(vsc);
> > + if (ret)
> > + return ret;
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANACCESS,
> > + VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK |
> > + VSC73XX_VLANACCESS_VLAN_SRC_CHECK |
> > + VSC73XX_VLANACCESS_VLAN_PORT_MASK,
> > + VSC73XX_VLANACCESS_VLAN_TBL_CMD_WRITE_ENTRY |
> > + VSC73XX_VLANACCESS_VLAN_SRC_CHECK |
> > + (portmap <<
> > + VSC73XX_VLANACCESS_VLAN_PORT_MASK_SHIFT));
> > + ret = vsc73xx_port_wait_for_vlan_table_cmd(vsc);
> > + if (ret)
> > + return ret;
> > + return 0;
> > +}
> > +
> > +static int
> > +vsc73xx_port_update_vlan_table(struct dsa_switch *ds, int port, u16 vid,
> > + bool set)
> > +{
> > + u8 portmap;
> > + int ret;
> > +
> > + if (vid > 4095)
> > + return -EPERM;
>
> Unnecessary defensive programming.
>
> > +
> > + ret = vsc73xx_port_read_vlan_table_entry(ds, vid, &portmap);
> > + if (ret)
> > + return ret;
> > +
> > + if (set)
> > + portmap |= BIT(port) | BIT(CPU_PORT);
> > + else
> > + portmap &= ~BIT(port);
> > +
> > + if (portmap == BIT(CPU_PORT))
> > + portmap = 0;
> > +
> > + ret = vsc73xx_port_write_vlan_table_entry(ds, vid, portmap);
> > +
> > + return ret;
>
> return vsc73xx_port_write_vlan_table_entry(...)
>
> > +}
> > +
> > +static void
> > +vsc73xx_port_set_vlan_conf(struct dsa_switch *ds, int port,
> > + enum vsc73xx_port_vlan_conf port_vlan_conf)
> > +{
> > + struct vsc73xx *vsc = ds->priv;
> > +
> > + if (port_vlan_conf == VSC73XX_VLAN_UNAWARE) {
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_MAC_CFG,
> > + VSC73XX_MAC_CFG_VLAN_AWR, 0);
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_MAC_CFG,
> > + VSC73XX_MAC_CFG_VLAN_DBLAWR, 0);
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_CAT_VLAN_MISC,
> > + VSC73XX_CAT_VLAN_MISC_VLAN_TCI_IGNORE_ENA,
> > + VSC73XX_CAT_VLAN_MISC_VLAN_TCI_IGNORE_ENA);
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_CAT_VLAN_MISC,
> > + VSC73XX_CAT_VLAN_MISC_VLAN_KEEP_TAG_ENA,
> > + VSC73XX_CAT_VLAN_MISC_VLAN_KEEP_TAG_ENA);
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_CAT_DROP,
> > + VSC73XX_CAT_DROP_TAGGED_ENA, 0);
> > + } else {
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_MAC_CFG,
> > + VSC73XX_MAC_CFG_VLAN_AWR,
> > + VSC73XX_MAC_CFG_VLAN_AWR);
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_CAT_DROP,
> > + VSC73XX_CAT_DROP_TAGGED_ENA, 0);
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_CAT_DROP,
> > + VSC73XX_CAT_DROP_UNTAGGED_ENA,
> > + VSC73XX_CAT_DROP_UNTAGGED_ENA);
> > +
> > + if (port_vlan_conf == VSC73XX_DOUBLE_VLAN_CPU_AWARE)
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_MAC_CFG,
> > + VSC73XX_MAC_CFG_VLAN_DBLAWR,
> > + VSC73XX_MAC_CFG_VLAN_DBLAWR);
> > + else
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_MAC_CFG,
> > + VSC73XX_MAC_CFG_VLAN_DBLAWR, 0);
> > +
> > + if (port_vlan_conf == VSC73XX_DOUBLE_VLAN_AWARE) {
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_CAT_VLAN_MISC,
> > + VSC73XX_CAT_VLAN_MISC_VLAN_TCI_IGNORE_ENA,
> > + VSC73XX_CAT_VLAN_MISC_VLAN_TCI_IGNORE_ENA);
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_CAT_VLAN_MISC,
> > + VSC73XX_CAT_VLAN_MISC_VLAN_KEEP_TAG_ENA,
> > + VSC73XX_CAT_VLAN_MISC_VLAN_KEEP_TAG_ENA);
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_TXUPDCFG,
> > + VSC73XX_TXUPDCFG_TX_INSERT_TAG, 0);
> > + } else {
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_CAT_VLAN_MISC,
> > + VSC73XX_CAT_VLAN_MISC_VLAN_TCI_IGNORE_ENA,
> > + 0);
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_CAT_VLAN_MISC,
> > + VSC73XX_CAT_VLAN_MISC_VLAN_KEEP_TAG_ENA,
> > + 0);
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_TXUPDCFG,
> > + VSC73XX_TXUPDCFG_TX_INSERT_TAG,
> > + VSC73XX_TXUPDCFG_TX_INSERT_TAG);
> > + }
> > +
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_TXUPDCFG,
> > + VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_ENA, 0);
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_TXUPDCFG,
> > + VSC73XX_TXUPDCFG_TX_UNTAGGED_VID, 0);
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_CAT_PORT_VLAN,
> > + VSC73XX_CAT_PORT_VLAN_VLAN_VID, 0);
> > + }
> > +}
> > +
>
> I need some time to understand what is being done here.
>
> > +static int vsc73xx_port_set_double_vlan_aware(struct dsa_switch *ds, int port)
> > +{
> > + int i, ret;
> > +
> > + if (port == CPU_PORT)
> > + vsc73xx_port_set_vlan_conf(ds, port,
> > + VSC73XX_DOUBLE_VLAN_CPU_AWARE);
> > + else
> > + vsc73xx_port_set_vlan_conf(ds, port,
> > + VSC73XX_DOUBLE_VLAN_AWARE);
> > +
> > + for (i = 0; i <= 4095; i++) {
>
> i < VLAN_N_VID
>
> > + ret = vsc73xx_port_update_vlan_table(ds, port, i, 0);
> > + if (ret)
> > + return ret;
>
> Clearing the VLAN table absolutely does not belong in a function that
> makes a port aware of double VLANs. And neither does it belong in a
> function that changes VLAN awareness, but that's not part of this patch,
> but 6/7. The bridge expects the VLAN table to be able to be populated
> asynchronously relative to enabling/disabling it. The same for the
> VLAN-aware FDB and MDB entries.
>
> > + }
> > + return ret;
> > +}
> > +
> > +static int vsc73xx_vlan_set_untagged(struct dsa_switch *ds, int port, u16 vid,
> > + bool port_vlan)
> > +{
> > + struct vsc73xx *vsc = ds->priv;
> > + u16 vlan_no;
> > + u32 val;
> > +
> > + vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_TXUPDCFG, &val);
> > +
> > + if (port_vlan && (val & VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_ENA)) {
> > + vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_TXUPDCFG,
> > + &val);
> > + vlan_no = (val & VSC73XX_TXUPDCFG_TX_UNTAGGED_VID) >>
> > + VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_SHIFT;
> > + if (!vid_is_dsa_8021q(vlan_no) && !vid_is_dsa_8021q(vid) &&
> > + vlan_no != vid) {
> > + dev_warn(vsc->dev,
> > + "Port %d can have only one untagged vid! Now is: %d.\n",
> > + port, vlan_no);
> > + return -EPERM;
>
> drop indentation by 1 level
>
> don't return -EPERM, as that indicates a permissions-related issue to
> the user process. Perhaps -EOPNOTSUPP.
>
> use the extack for the message.. we now also have NL_SET_ERR_MSG_FMT()
>
> > + }
> > + }
> > +
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_CAT_DROP,
> > + VSC73XX_CAT_DROP_UNTAGGED_ENA, 0);
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_TXUPDCFG,
> > + VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_ENA,
> > + VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_ENA);
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_TXUPDCFG,
> > + VSC73XX_TXUPDCFG_TX_UNTAGGED_VID,
> > + (vid << VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_SHIFT) &
> > + VSC73XX_TXUPDCFG_TX_UNTAGGED_VID);
> > + return 0;
> > +}
> > +
> > +static int vsc73xx_vlan_set_pvid(struct dsa_switch *ds, int port, u16 vid,
> > + bool port_vlan)
> > +{
> > + struct dsa_port *dsa_port = dsa_to_port(ds, port);
> > + struct vsc73xx *vsc = ds->priv;
> > + u16 vlan_no;
> > + u32 val;
> > +
> > + if (!dsa_port)
> > + return -EINVAL;
> > +
> > + vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_CAT_PORT_VLAN, &val);
> > + vlan_no = val & VSC73XX_CAT_PORT_VLAN_VLAN_VID;
> > +
> > + if (port_vlan && vlan_no && !vid_is_dsa_8021q(vlan_no) &&
> > + !vid_is_dsa_8021q(vid) && vlan_no != vid) {
> > + dev_warn(vsc->dev,
> > + "Port %d can have only one pvid! Now is: %d.\n",
> > + port, vlan_no);
> > + return -EPERM;
> > + }
> > +
> > + if (dsa_port_is_vlan_filtering(dsa_port))
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_CAT_VLAN_MISC,
> > + VSC73XX_CAT_VLAN_MISC_VLAN_TCI_IGNORE_ENA,
> > + 0);
> > + else
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> > + VSC73XX_CAT_VLAN_MISC,
> > + VSC73XX_CAT_VLAN_MISC_VLAN_TCI_IGNORE_ENA,
> > + VSC73XX_CAT_VLAN_MISC_VLAN_TCI_IGNORE_ENA);
> > +
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_CAT_VLAN_MISC,
> > + VSC73XX_CAT_VLAN_MISC_VLAN_KEEP_TAG_ENA,
> > + VSC73XX_CAT_VLAN_MISC_VLAN_KEEP_TAG_ENA);
> > +
> > + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_CAT_PORT_VLAN,
> > + VSC73XX_CAT_PORT_VLAN_VLAN_VID,
> > + vid & VSC73XX_CAT_PORT_VLAN_VLAN_VID);
>
> Why would changing the PVID (what this function does) alter VLAN_TCI_IGNORE_ENA
> and VLAN_KEEP_TAG_ENA?
>
> > + return 0;
> > +}
> > +
> > +static int vsc73xx_tag_8021q_vlan_add(struct dsa_switch *ds, int port, u16 vid,
> > + u16 flags)
> > +{
> > + bool untagged = flags & BRIDGE_VLAN_INFO_UNTAGGED;
> > + bool pvid = flags & BRIDGE_VLAN_INFO_PVID;
> > + int ret;
> > +
> > + if (untagged) {
> > + ret = vsc73xx_vlan_set_untagged(ds, port, vid, false);
> > + if (ret)
> > + return ret;
> > + }
> > + if (pvid) {
> > + ret = vsc73xx_vlan_set_pvid(ds, port, vid, false);
> > + if (ret)
> > + return ret;
> > + }
> > + ret = vsc73xx_port_update_vlan_table(ds, port, vid, 1);
>
> return vsc73xx_port_update_vlan_table(...)
>
> > + if (ret)
> > + return ret;
> > +
> > + return 0;
> > +}
> > +
> > +static int vsc73xx_tag_8021q_vlan_del(struct dsa_switch *ds, int port, u16 vid)
> > +{
> > + return vsc73xx_port_update_vlan_table(ds, port, vid, 0);
> > +}
> > +
> > +static int vsc73xx_setup(struct dsa_switch *ds)
> > +{
> > + struct vsc73xx *vsc = ds->priv;
> > + int i, ret;
> > +
> > + dev_info(vsc->dev, "set up the switch\n");
> > +
> > + ds->vlan_filtering_is_global = false;
>
> No reason to set this, it's false by default.
>
> > + ds->configure_vlan_while_not_filtering = false;
>
> This is a legacy flag that should be set to true (default value) for all
> drivers and then eliminated.
>
> To check whether your implementation is doing the right thing, you must
> remove this line, and make sure that after this configuration:
>
> ip link add br0 type bridge vlan_filtering 0
> ip link set swp0 master br0
> bridge vlan add dev swp0 vid 100 pvid untagged
>
> the VLAN-unaware forwarding of the switch is not affected. This means
> that the PVID of the port that is committed to hardware (and thus, the
> allowed destination port mask) must remain what the driver set it to,
> while the bridge vlan_filtering option is not enabled. The hardware PVID
> must only follow the bridge port PVID while in vlan_filtering=true mode.
>
> > +
> > + /* Issue RESET */
> > + vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
> > + VSC73XX_GLORESET_MASTER_RESET);
> > + usleep_range(125, 200);
> > +
> > + /* Initialize memory, initialize RAM bank 0..15 except 6 and 7
> > + * This sequence appears in the
> > + * VSC7385 SparX-G5 datasheet section 6.6.1
> > + * VSC7395 SparX-G5e datasheet section 6.6.1
> > + * "initialization sequence".
> > + * No explanation is given to the 0x1010400 magic number.
> > + */
> > + for (i = 0; i <= 15; i++) {
> > + if (i != 6 && i != 7) {
> > + vsc73xx_write(vsc, VSC73XX_BLOCK_MEMINIT,
> > + 2,
> > + 0, 0x1010400 + i);
> > + mdelay(1);
> > + }
> > + }
> > + mdelay(30);
> > +
> > + /* Clear MAC table */
> > + vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
> > + VSC73XX_MACACCESS,
> > + VSC73XX_MACACCESS_CMD_CLEAR_TABLE);
> > +
> > + /* Clear VLAN table */
> > + vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0,
> > + VSC73XX_VLANACCESS,
> > + VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE);
> > +
> > + msleep(40);
> > +
> > + /* Use 20KiB buffers on all ports on VSC7395
> > + * The VSC7385 has 16KiB buffers and that is the
> > + * default if we don't set this up explicitly.
> > + * Port "31" is "all ports".
> > + */
> > + if (IS_739X(vsc))
> > + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 0x1f,
> > + VSC73XX_Q_MISC_CONF,
> > + VSC73XX_Q_MISC_CONF_EXTENT_MEM);
> > +
> > + /* Put all ports into reset until enabled */
> > + for (i = 0; i < 7; i++) {
> > + if (i == 5)
> > + continue;
> > + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 4,
> > + VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET);
> > + }
> > +
> > + /* MII delay, set both GTX and RX delay to 2 ns */
> > + vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY,
> > + VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS |
> > + VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS);
> > + /* Ingess VLAN reception mask (table 145) */
>
> s/ingess/ingress/
>
> > + vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANMASK,
> > + 0x5f);
> > + /* IP multicast flood mask (table 144) */
> > + vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_IFLODMSK,
> > + 0xff);
> > +
> > + mdelay(50);
> > +
> > + for (i = 0; i < vsc->ds->num_ports; i++) {
> > + if (i == 5)
> > + continue;
>
> dsa_switch_for_each_available_port()
>
> > + ret = vsc73xx_port_set_double_vlan_aware(ds, i);
> > + if (ret)
> > + return ret;
>
> If ports are made VLAN-aware by default (including in standalone mode),
> shouldn't this be reflected in ds->needs_standalone_vlan_filtering?
>
Not for QinQ. Hardware filtering without vlan_filtering=1 is used only
for separation of outer vlans.
> > + }
> > +
> > + rtnl_lock();
> > + ret = dsa_tag_8021q_register(ds, htons(ETH_P_8021Q));
> > + rtnl_unlock();
> > + if (ret)
> > + return ret;
> > +
> > + /*configure forward map to CPU <-> port only*/
>
> style: space after /* and before */ (also present in a few other places)
>
> > + for (i = 0; i < vsc->ds->num_ports; i++)
> > + vsc->forward_map[i] = VSC73XX_SRCMASKS_PORTS_MASK &
> > + BIT(CPU_PORT);
> > + vsc->forward_map[CPU_PORT] = VSC73XX_SRCMASKS_PORTS_MASK &
> > + ~BIT(CPU_PORT);
> > +
> > + /* Release reset from the internal PHYs */
> > + vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
> > + VSC73XX_GLORESET_PHY_RESET);
> > +
> > + udelay(4);
> > +
> > + return 0;
> > +}
> > +
> > static const struct dsa_switch_ops vsc73xx_ds_ops = {
> > .get_tag_protocol = vsc73xx_get_tag_protocol,
> > .setup = vsc73xx_setup,
> > @@ -1095,6 +1455,8 @@ static const struct dsa_switch_ops vsc73xx_ds_ops = {
> > .port_change_mtu = vsc73xx_change_mtu,
> > .port_max_mtu = vsc73xx_get_max_mtu,
> > .port_stp_state_set = vsc73xx_port_stp_state_set,
> > + .tag_8021q_vlan_add = vsc73xx_tag_8021q_vlan_add,
> > + .tag_8021q_vlan_del = vsc73xx_tag_8021q_vlan_del,
> > };
> >
> > static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
> > diff --git a/include/net/dsa.h b/include/net/dsa.h
> > index 75022cf771cf..2440df7ea6c9 100644
> > --- a/include/net/dsa.h
> > +++ b/include/net/dsa.h
> > @@ -56,6 +56,7 @@ struct phylink_link_state;
> > #define DSA_TAG_PROTO_RTL8_4T_VALUE 25
> > #define DSA_TAG_PROTO_RZN1_A5PSW_VALUE 26
> > #define DSA_TAG_PROTO_LAN937X_VALUE 27
> > +#define DSA_TAG_PROTO_VSC73XX_8021Q_VALUE 28
> >
> > enum dsa_tag_protocol {
> > DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE,
> > @@ -86,6 +87,7 @@ enum dsa_tag_protocol {
> > DSA_TAG_PROTO_RTL8_4T = DSA_TAG_PROTO_RTL8_4T_VALUE,
> > DSA_TAG_PROTO_RZN1_A5PSW = DSA_TAG_PROTO_RZN1_A5PSW_VALUE,
> > DSA_TAG_PROTO_LAN937X = DSA_TAG_PROTO_LAN937X_VALUE,
> > + DSA_TAG_PROTO_VSC73XX_8021Q = DSA_TAG_PROTO_VSC73XX_8021Q_VALUE,
> > };
> >
> > struct dsa_switch;
> > diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
> > index 8e698bea99a3..e59360071c67 100644
> > --- a/net/dsa/Kconfig
> > +++ b/net/dsa/Kconfig
> > @@ -166,6 +166,12 @@ config NET_DSA_TAG_TRAILER
> > Say Y or M if you want to enable support for tagging frames at
> > with a trailed. e.g. Marvell 88E6060.
> >
> > +config NET_DSA_TAG_VSC73XX_8021Q
> > + tristate "Tag driver for Microchip/Vitesse VSC73xx family of switches, using VLAN"
> > + help
> > + Say Y or M if you want to enable support for tagging frames with a
> > + custom VLAN-based header.
> > +
>
> Separate patches for the tagger and for the driver infrastructure please.
> It's hard to review.
>
> Also, there's some very strange splitting between this patch and 6/7
> ("net: dsa: vsc73xx: Add vlan filtering"). I would have expected that to
> contain the basic infrastructure (thus appearing first), then the
> driver-side tag_8021q infra, then the tagger. It's impossible for me to
> comment on things that have to do with VLAN infrastructure when it's
> split between 2 patches.
I will rework it: move vsc73xx_setup movement to a different commit,
the same with tagger code and squash all vlan stuff. In this version,
I decided to make tag 8021q first, because it's impossible/very hard
to use and test the driver with TAG_NONE at this moment.
--
Pawel Dembicki
Powered by blists - more mailing lists