lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230629034846.30600-4-quic_luoj@quicinc.com>
Date: Thu, 29 Jun 2023 11:48:46 +0800
From: Luo Jie <quic_luoj@...cinc.com>
To: <andrew@...n.ch>, <hkallweit1@...il.com>, <davem@...emloft.net>,
        <edumazet@...gle.com>, <kuba@...nel.org>, <pabeni@...hat.com>,
        <linux@...linux.org.uk>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <quic_sricharan@...cinc.com>, Luo Jie <quic_luoj@...cinc.com>
Subject: [PATCH 3/3] net: phy: at803x: add qca8081 fifo reset on the link down

The qca8081 fifo needs to be reset on link down and released
on the link up in case of any abnormal issue such as the
packet blocked on the PHY.

Signed-off-by: Luo Jie <quic_luoj@...cinc.com>
---
 drivers/net/phy/at803x.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 29aab7eaaa90..5dc707eaf18c 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -276,6 +276,9 @@
 #define QCA808X_PHY_MMD7_CHIP_TYPE		0x901d
 #define QCA808X_PHY_CHIP_TYPE_1G		BIT(0)
 
+#define QCA8081_PHY_SERDES_MMD1_FIFO_CTRL	0x9072
+#define QCA8081_PHY_FIFO_RSTN			BIT(11)
+
 MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
 MODULE_AUTHOR("Matus Ujhelyi");
 MODULE_LICENSE("GPL");
@@ -1808,6 +1811,16 @@ static int qca808x_config_init(struct phy_device *phydev)
 			QCA808X_ADC_THRESHOLD_MASK, QCA808X_ADC_THRESHOLD_100MV);
 }
 
+static int qca808x_fifo_reset(struct phy_device *phydev)
+{
+	/* Reset serdes fifo on link down, Release serdes fifo on link up,
+	 * the serdes address is phy address added by 1.
+	 */
+	return mdiobus_c45_modify_changed(phydev->mdio.bus, phydev->mdio.addr + 1,
+			MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL,
+			QCA8081_PHY_FIFO_RSTN, phydev->link ? QCA8081_PHY_FIFO_RSTN : 0);
+}
+
 static int qca808x_read_status(struct phy_device *phydev)
 {
 	int ret;
@@ -1827,6 +1840,10 @@ static int qca808x_read_status(struct phy_device *phydev)
 	if (ret < 0)
 		return ret;
 
+	ret = qca808x_fifo_reset(phydev);
+	if (ret < 0)
+		return ret;
+
 	if (phydev->link) {
 		if (phydev->speed == SPEED_2500)
 			phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
-- 
2.17.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ