lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230630-topic-oxnas-upstream-remove-v2-1-fb6ab3dea87c@linaro.org>
Date: Fri, 30 Jun 2023 18:58:26 +0200
From: Neil Armstrong <neil.armstrong@...aro.org>
To: Michael Turquette <mturquette@...libre.com>, 
 Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh+dt@...nel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, 
 Conor Dooley <conor+dt@...nel.org>, 
 Daniel Lezcano <daniel.lezcano@...aro.org>, 
 Thomas Gleixner <tglx@...utronix.de>, 
 Miquel Raynal <miquel.raynal@...tlin.com>, 
 Richard Weinberger <richard@....at>, Vignesh Raghavendra <vigneshr@...com>, 
 Giuseppe Cavallaro <peppe.cavallaro@...com>, 
 Alexandre Torgue <alexandre.torgue@...s.st.com>, 
 Jose Abreu <joabreu@...opsys.com>, "David S. Miller" <davem@...emloft.net>, 
 Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, 
 Paolo Abeni <pabeni@...hat.com>, 
 Maxime Coquelin <mcoquelin.stm32@...il.com>, 
 Linus Walleij <linus.walleij@...aro.org>, 
 Bartosz Golaszewski <brgl@...ev.pl>, Andy Shevchenko <andy@...nel.org>, 
 Sebastian Reichel <sre@...nel.org>, Marc Zyngier <maz@...nel.org>
Cc: linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org, 
 devicetree@...r.kernel.org, linux-mtd@...ts.infradead.org, 
 netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com, 
 linux-arm-kernel@...ts.infradead.org, linux-gpio@...r.kernel.org, 
 linux-pm@...r.kernel.org, linux-oxnas@...ups.io, 
 Neil Armstrong <neil.armstrong@...aro.org>, Arnd Bergmann <arnd@...db.de>, 
 Daniel Golle <daniel@...rotopia.org>
Subject: [PATCH v2 01/15] clk: oxnas: remove obsolete clock driver

Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 clock driver.

Acked-by: Linus Walleij <linus.walleij@...aro.org>
Acked-by: Arnd Bergmann <arnd@...db.de>
Acked-by: Daniel Golle <daniel@...rotopia.org>
Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
---
 drivers/clk/Kconfig     |   7 --
 drivers/clk/Makefile    |   1 -
 drivers/clk/clk-oxnas.c | 251 ------------------------------------------------
 3 files changed, 259 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 93f38a8178ba..59a101e1cf65 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -360,13 +360,6 @@ config COMMON_CLK_PXA
 	help
 	  Support for the Marvell PXA SoC.
 
-config COMMON_CLK_OXNAS
-	bool "Clock driver for the OXNAS SoC Family"
-	depends on ARCH_OXNAS || COMPILE_TEST
-	select MFD_SYSCON
-	help
-	  Support for the OXNAS SoC Family clocks.
-
 config COMMON_CLK_RS9_PCIE
 	tristate "Clock driver for Renesas 9-series PCIe clock generators"
 	depends on I2C
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 7cb000549b61..94155999eba3 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -52,7 +52,6 @@ obj-$(CONFIG_ARCH_MOXART)		+= clk-moxart.o
 obj-$(CONFIG_ARCH_NOMADIK)		+= clk-nomadik.o
 obj-$(CONFIG_ARCH_NPCM7XX)	    	+= clk-npcm7xx.o
 obj-$(CONFIG_ARCH_NSPIRE)		+= clk-nspire.o
-obj-$(CONFIG_COMMON_CLK_OXNAS)		+= clk-oxnas.o
 obj-$(CONFIG_COMMON_CLK_PALMAS)		+= clk-palmas.o
 obj-$(CONFIG_CLK_LS1028A_PLLDIG)	+= clk-plldig.o
 obj-$(CONFIG_COMMON_CLK_PWM)		+= clk-pwm.o
diff --git a/drivers/clk/clk-oxnas.c b/drivers/clk/clk-oxnas.c
deleted file mode 100644
index 584e293156ad..000000000000
--- a/drivers/clk/clk-oxnas.c
+++ /dev/null
@@ -1,251 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Broadcom
- * Copyright (C) 2012 Stephen Warren
- * Copyright (C) 2016 Neil Armstrong <narmstrong@...libre.com>
- */
-
-#include <linux/clk-provider.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/stringify.h>
-#include <linux/regmap.h>
-#include <linux/mfd/syscon.h>
-
-#include <dt-bindings/clock/oxsemi,ox810se.h>
-#include <dt-bindings/clock/oxsemi,ox820.h>
-
-/* Standard regmap gate clocks */
-struct clk_oxnas_gate {
-	struct clk_hw hw;
-	unsigned int bit;
-	struct regmap *regmap;
-};
-
-struct oxnas_stdclk_data {
-	struct clk_hw_onecell_data *onecell_data;
-	struct clk_oxnas_gate **gates;
-	unsigned int ngates;
-	struct clk_oxnas_pll **plls;
-	unsigned int nplls;
-};
-
-/* Regmap offsets */
-#define CLK_STAT_REGOFFSET	0x24
-#define CLK_SET_REGOFFSET	0x2c
-#define CLK_CLR_REGOFFSET	0x30
-
-static inline struct clk_oxnas_gate *to_clk_oxnas_gate(struct clk_hw *hw)
-{
-	return container_of(hw, struct clk_oxnas_gate, hw);
-}
-
-static int oxnas_clk_gate_is_enabled(struct clk_hw *hw)
-{
-	struct clk_oxnas_gate *std = to_clk_oxnas_gate(hw);
-	int ret;
-	unsigned int val;
-
-	ret = regmap_read(std->regmap, CLK_STAT_REGOFFSET, &val);
-	if (ret < 0)
-		return ret;
-
-	return val & BIT(std->bit);
-}
-
-static int oxnas_clk_gate_enable(struct clk_hw *hw)
-{
-	struct clk_oxnas_gate *std = to_clk_oxnas_gate(hw);
-
-	regmap_write(std->regmap, CLK_SET_REGOFFSET, BIT(std->bit));
-
-	return 0;
-}
-
-static void oxnas_clk_gate_disable(struct clk_hw *hw)
-{
-	struct clk_oxnas_gate *std = to_clk_oxnas_gate(hw);
-
-	regmap_write(std->regmap, CLK_CLR_REGOFFSET, BIT(std->bit));
-}
-
-static const struct clk_ops oxnas_clk_gate_ops = {
-	.enable = oxnas_clk_gate_enable,
-	.disable = oxnas_clk_gate_disable,
-	.is_enabled = oxnas_clk_gate_is_enabled,
-};
-
-static const char *const osc_parents[] = {
-	"oscillator",
-};
-
-static const char *const eth_parents[] = {
-	"gmacclk",
-};
-
-#define OXNAS_GATE(_name, _bit, _parents)				\
-struct clk_oxnas_gate _name = {						\
-	.bit = (_bit),							\
-	.hw.init = &(struct clk_init_data) {				\
-		.name = #_name,						\
-		.ops = &oxnas_clk_gate_ops,				\
-		.parent_names = _parents,				\
-		.num_parents = ARRAY_SIZE(_parents),			\
-		.flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED),	\
-	},								\
-}
-
-static OXNAS_GATE(ox810se_leon, 0, osc_parents);
-static OXNAS_GATE(ox810se_dma_sgdma, 1, osc_parents);
-static OXNAS_GATE(ox810se_cipher, 2, osc_parents);
-static OXNAS_GATE(ox810se_sata, 4, osc_parents);
-static OXNAS_GATE(ox810se_audio, 5, osc_parents);
-static OXNAS_GATE(ox810se_usbmph, 6, osc_parents);
-static OXNAS_GATE(ox810se_etha, 7, eth_parents);
-static OXNAS_GATE(ox810se_pciea, 8, osc_parents);
-static OXNAS_GATE(ox810se_nand, 9, osc_parents);
-
-static struct clk_oxnas_gate *ox810se_gates[] = {
-	&ox810se_leon,
-	&ox810se_dma_sgdma,
-	&ox810se_cipher,
-	&ox810se_sata,
-	&ox810se_audio,
-	&ox810se_usbmph,
-	&ox810se_etha,
-	&ox810se_pciea,
-	&ox810se_nand,
-};
-
-static OXNAS_GATE(ox820_leon, 0, osc_parents);
-static OXNAS_GATE(ox820_dma_sgdma, 1, osc_parents);
-static OXNAS_GATE(ox820_cipher, 2, osc_parents);
-static OXNAS_GATE(ox820_sd, 3, osc_parents);
-static OXNAS_GATE(ox820_sata, 4, osc_parents);
-static OXNAS_GATE(ox820_audio, 5, osc_parents);
-static OXNAS_GATE(ox820_usbmph, 6, osc_parents);
-static OXNAS_GATE(ox820_etha, 7, eth_parents);
-static OXNAS_GATE(ox820_pciea, 8, osc_parents);
-static OXNAS_GATE(ox820_nand, 9, osc_parents);
-static OXNAS_GATE(ox820_ethb, 10, eth_parents);
-static OXNAS_GATE(ox820_pcieb, 11, osc_parents);
-static OXNAS_GATE(ox820_ref600, 12, osc_parents);
-static OXNAS_GATE(ox820_usbdev, 13, osc_parents);
-
-static struct clk_oxnas_gate *ox820_gates[] = {
-	&ox820_leon,
-	&ox820_dma_sgdma,
-	&ox820_cipher,
-	&ox820_sd,
-	&ox820_sata,
-	&ox820_audio,
-	&ox820_usbmph,
-	&ox820_etha,
-	&ox820_pciea,
-	&ox820_nand,
-	&ox820_etha,
-	&ox820_pciea,
-	&ox820_ref600,
-	&ox820_usbdev,
-};
-
-static struct clk_hw_onecell_data ox810se_hw_onecell_data = {
-	.hws = {
-		[CLK_810_LEON]	= &ox810se_leon.hw,
-		[CLK_810_DMA_SGDMA]	= &ox810se_dma_sgdma.hw,
-		[CLK_810_CIPHER]	= &ox810se_cipher.hw,
-		[CLK_810_SATA]	= &ox810se_sata.hw,
-		[CLK_810_AUDIO]	= &ox810se_audio.hw,
-		[CLK_810_USBMPH]	= &ox810se_usbmph.hw,
-		[CLK_810_ETHA]	= &ox810se_etha.hw,
-		[CLK_810_PCIEA]	= &ox810se_pciea.hw,
-		[CLK_810_NAND]	= &ox810se_nand.hw,
-	},
-	.num = ARRAY_SIZE(ox810se_gates),
-};
-
-static struct clk_hw_onecell_data ox820_hw_onecell_data = {
-	.hws = {
-		[CLK_820_LEON]	= &ox820_leon.hw,
-		[CLK_820_DMA_SGDMA]	= &ox820_dma_sgdma.hw,
-		[CLK_820_CIPHER]	= &ox820_cipher.hw,
-		[CLK_820_SD]	= &ox820_sd.hw,
-		[CLK_820_SATA]	= &ox820_sata.hw,
-		[CLK_820_AUDIO]	= &ox820_audio.hw,
-		[CLK_820_USBMPH]	= &ox820_usbmph.hw,
-		[CLK_820_ETHA]	= &ox820_etha.hw,
-		[CLK_820_PCIEA]	= &ox820_pciea.hw,
-		[CLK_820_NAND]	= &ox820_nand.hw,
-		[CLK_820_ETHB]	= &ox820_ethb.hw,
-		[CLK_820_PCIEB]	= &ox820_pcieb.hw,
-		[CLK_820_REF600]	= &ox820_ref600.hw,
-		[CLK_820_USBDEV]	= &ox820_usbdev.hw,
-	},
-	.num = ARRAY_SIZE(ox820_gates),
-};
-
-static struct oxnas_stdclk_data ox810se_stdclk_data = {
-	.onecell_data = &ox810se_hw_onecell_data,
-	.gates = ox810se_gates,
-	.ngates = ARRAY_SIZE(ox810se_gates),
-};
-
-static struct oxnas_stdclk_data ox820_stdclk_data = {
-	.onecell_data = &ox820_hw_onecell_data,
-	.gates = ox820_gates,
-	.ngates = ARRAY_SIZE(ox820_gates),
-};
-
-static const struct of_device_id oxnas_stdclk_dt_ids[] = {
-	{ .compatible = "oxsemi,ox810se-stdclk", &ox810se_stdclk_data },
-	{ .compatible = "oxsemi,ox820-stdclk", &ox820_stdclk_data },
-	{ }
-};
-
-static int oxnas_stdclk_probe(struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node, *parent_np;
-	const struct oxnas_stdclk_data *data;
-	struct regmap *regmap;
-	int ret;
-	int i;
-
-	data = of_device_get_match_data(&pdev->dev);
-
-	parent_np = of_get_parent(np);
-	regmap = syscon_node_to_regmap(parent_np);
-	of_node_put(parent_np);
-	if (IS_ERR(regmap)) {
-		dev_err(&pdev->dev, "failed to have parent regmap\n");
-		return PTR_ERR(regmap);
-	}
-
-	for (i = 0 ; i < data->ngates ; ++i)
-		data->gates[i]->regmap = regmap;
-
-	for (i = 0; i < data->onecell_data->num; i++) {
-		if (!data->onecell_data->hws[i])
-			continue;
-
-		ret = devm_clk_hw_register(&pdev->dev,
-					   data->onecell_data->hws[i]);
-		if (ret)
-			return ret;
-	}
-
-	return of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
-				      data->onecell_data);
-}
-
-static struct platform_driver oxnas_stdclk_driver = {
-	.probe = oxnas_stdclk_probe,
-	.driver	= {
-		.name = "oxnas-stdclk",
-		.suppress_bind_attrs = true,
-		.of_match_table = oxnas_stdclk_dt_ids,
-	},
-};
-builtin_platform_driver(oxnas_stdclk_driver);

-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ