netdev - Re: [PATCH 1/3] net: phy: at803x: support qca8081 1G chip type

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Sat, 1 Jul 2023 16:30:43 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Jie Luo <quic_luoj@...cinc.com>
Cc: hkallweit1@...il.com, davem@...emloft.net, edumazet@...gle.com,
	kuba@...nel.org, pabeni@...hat.com, linux@...linux.org.uk,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/3] net: phy: at803x: support qca8081 1G chip type

> There are MMD device 1, 3, 7 in qca8081 PHY, the PMA abilities
> 10/100/1000/2500 are compliant with genphy_c45_pma_read_abilities, but the
> MDIO_AN_STAT1_ABLE does not exist in MMD7.1 register.
> 
> so the genphy_c45_pma_read_abilities can't be fully supported by qca8081
> phy, sorry for this misunderstanding.

If all you are missing is MDIO_AN_STAT1_ABLE, then i assume you are
missing Autoneg? So have your tried using
genphy_c45_pma_read_abilities() and then just doing:

                        linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
                                         phydev->supported);

with a comment explaining why.

	Andrew