netdev - [PATCH 2/2] dt-bindings: net: phy: vsc8531: document 'vsc8531,clkout-freq-mhz' property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230706081554.1616839-2-alex@shruggie.ro>
Date: Thu,  6 Jul 2023 11:15:54 +0300
From: Alexandru Ardelean <alex@...uggie.ro>
To: netdev@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org
Cc: davem@...emloft.net,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com,
	robh+dt@...nel.org,
	krzysztof.kozlowski+dt@...aro.org,
	conor+dt@...nel.org,
	andrew@...n.ch,
	hkallweit1@...il.com,
	linux@...linux.org.uk,
	olteanv@...il.com,
	alex@...uggie.ro,
	marius.muresan@....ro
Subject: [PATCH 2/2] dt-bindings: net: phy: vsc8531: document 'vsc8531,clkout-freq-mhz' property

For VSC8351 and similar PHYs, a new property was added to generate a clock
signal on the CLKOUT pin.
This change documents the change in the device-tree bindings doc.

Signed-off-by: Alexandru Ardelean <alex@...uggie.ro>
---
 Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
index 0a3647fe331b..133bdd644618 100644
--- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
+++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
@@ -31,6 +31,10 @@ Optional properties:
 			  VSC8531_LINK_100_ACTIVITY (2),
 			  VSC8531_LINK_ACTIVITY (0) and
 			  VSC8531_DUPLEX_COLLISION (8).
+- vsc8531,clkout-freq-mhz : For VSC8531 and similar PHYs, this will output
+			  a clock signal on the CLKOUT pin of the chip.
+			  The supported values are 25, 50 & 125 Mhz.
+			  Default value is no clock signal on the CLKOUT pin.
 - load-save-gpios	: GPIO used for the load/save operation of the PTP
 			  hardware clock (PHC).
 
@@ -69,5 +73,6 @@ Example:
                 vsc8531,edge-slowdown	= <7>;
                 vsc8531,led-0-mode	= <VSC8531_LINK_1000_ACTIVITY>;
                 vsc8531,led-1-mode	= <VSC8531_LINK_100_ACTIVITY>;
+                vsc8531,clkout-freq-mhz	= <50>;
 		load-save-gpios		= <&gpio 10 GPIO_ACTIVE_HIGH>;
         };
-- 
2.40.1