netdev - Re: [PATCH] r8152: Suspend USB device before shutdown when WoL is enabled

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <2c12d7a0-3edb-48b3-abf7-135e1a8838ca@rowland.harvard.edu>
Date: Fri, 7 Jul 2023 21:51:27 -0400
From: Alan Stern <stern@...land.harvard.edu>
To: Jakub Kicinski <kuba@...nel.org>
Cc: Alexandru Gagniuc <alexandru.gagniuc@...com>, linux-usb@...r.kernel.org,
  netdev@...r.kernel.org, davem@...emloft.net, edumazet@...gle.com,
  pabeni@...hat.com, hayeswang@...ltek.com, jflf_kernel@....com,
  bjorn@...k.no, svenva@...omium.org, linux-kernel@...r.kernel.org,
  eniac-xw.zhang@...com, stable@...r.kernel.org
Subject: Re: [PATCH] r8152: Suspend USB device before shutdown when WoL is
 enabled

On Fri, Jul 07, 2023 at 05:12:25PM -0700, Jakub Kicinski wrote:
> On Thu,  6 Jul 2023 18:28:58 +0000 Alexandru Gagniuc wrote:
> > For Wake-on-LAN to work from S5 (shutdown), the USB link must be put
> > in U3 state. If it is not, and the host "disappears", the chip will
> > no longer respond to WoL triggers.
> >  
> > To resolve this, add a notifier block and register it as a reboot
> > notifier. When WoL is enabled, work through the usb_device struct to
> > get to the suspend function. Calling this function puts the link in
> > the correct state for WoL to function.
> 
> Would be good to hear from USB experts on this one, to an outside seems
> like something that the bus should be doing, possibly based on some
> driver opt-in..

The USB spec does not include any discussion of what things should be 
done when the system is turned off -- it doesn't even really acknowledge 
the existence of different system-wide power states.  As a result, the 
USB subsystem never developed any support for power-off callbacks or 
anything else of the sort.

Of course, this kind of thing can always be added.  But I don't think 
there's any way to distinguish (at the USB level) between wakeup from 
S5-off and wakeup from any other low-power system state.  And the PM 
part of the device model doesn't have multiple types of "enable-wakeup" 
flags -- either a device is enabled for wakeup or it isn't.

Alan Stern