netdev - [PATCH net-next 05/11] net: dsa: mv88e6xxx: remove handling for DSA and CPU ports

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1qJru8-00Gkje-3c@rmk-PC.armlinux.org.uk>
Date: Thu, 13 Jul 2023 09:42:28 +0100
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>
Cc: "David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Florian Fainelli <f.fainelli@...il.com>,
	Jakub Kicinski <kuba@...nel.org>,
	netdev@...r.kernel.org,
	Paolo Abeni <pabeni@...hat.com>,
	Vladimir Oltean <olteanv@...il.com>
Subject: [PATCH net-next 05/11] net: dsa: mv88e6xxx: remove handling for DSA
 and CPU ports

As we now always use a fixed-link for DSA and CPU ports, we no longer
need the hack in the Marvell code to make this work. Remove it.

This is especially important with the conversion of DSA drivers to
phylink_pcs, as the PCS code only gets called if we are using
phylink for the port.

Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 48 ++++----------------------------
 1 file changed, 5 insertions(+), 43 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 8b51756bd805..42c325409ac4 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3315,56 +3315,17 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port)
 {
 	struct device_node *phy_handle = NULL;
 	struct dsa_switch *ds = chip->ds;
-	phy_interface_t mode;
 	struct dsa_port *dp;
-	int tx_amp, speed;
+	int tx_amp;
 	int err;
 	u16 reg;
 
 	chip->ports[port].chip = chip;
 	chip->ports[port].port = port;
 
-	dp = dsa_to_port(ds, port);
-
-	/* MAC Forcing register: don't force link, speed, duplex or flow control
-	 * state to any particular values on physical ports, but force the CPU
-	 * port and all DSA ports to their maximum bandwidth and full duplex.
-	 */
-	if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) {
-		struct phylink_config pl_config = {};
-		unsigned long caps;
-
-		chip->info->ops->phylink_get_caps(chip, port, &pl_config);
-
-		caps = pl_config.mac_capabilities;
-
-		if (chip->info->ops->port_max_speed_mode)
-			mode = chip->info->ops->port_max_speed_mode(chip, port);
-		else
-			mode = PHY_INTERFACE_MODE_NA;
-
-		if (caps & MAC_10000FD)
-			speed = SPEED_10000;
-		else if (caps & MAC_5000FD)
-			speed = SPEED_5000;
-		else if (caps & MAC_2500FD)
-			speed = SPEED_2500;
-		else if (caps & MAC_1000)
-			speed = SPEED_1000;
-		else if (caps & MAC_100)
-			speed = SPEED_100;
-		else
-			speed = SPEED_10;
-
-		err = mv88e6xxx_port_setup_mac(chip, port, LINK_FORCED_UP,
-					       speed, DUPLEX_FULL,
-					       PAUSE_OFF, mode);
-	} else {
-		err = mv88e6xxx_port_setup_mac(chip, port, LINK_UNFORCED,
-					       SPEED_UNFORCED, DUPLEX_UNFORCED,
-					       PAUSE_ON,
-					       PHY_INTERFACE_MODE_NA);
-	}
+	err = mv88e6xxx_port_setup_mac(chip, port, LINK_UNFORCED,
+				       SPEED_UNFORCED, DUPLEX_UNFORCED,
+				       PAUSE_ON, PHY_INTERFACE_MODE_NA);
 	if (err)
 		return err;
 
@@ -3541,6 +3502,7 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port)
 	}
 
 	if (chip->info->ops->serdes_set_tx_amplitude) {
+		dp = dsa_to_port(ds, port);
 		if (dp)
 			phy_handle = of_parse_phandle(dp->dn, "phy-handle", 0);
 
-- 
2.30.2