[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230713074001-mutt-send-email-mst@kernel.org>
Date: Thu, 13 Jul 2023 07:40:12 -0400
From: "Michael S. Tsirkin" <mst@...hat.com>
To: Gavin Li <gavinl@...dia.com>
Cc: jasowang@...hat.com, xuanzhuo@...ux.alibaba.com, davem@...emloft.net,
edumazet@...gle.com, kuba@...nel.org, pabeni@...hat.com,
ast@...nel.org, daniel@...earbox.net, hawk@...nel.org,
john.fastabend@...il.com, jiri@...dia.com, dtatulea@...dia.com,
virtualization@...ts.linux-foundation.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, bpf@...r.kernel.org
Subject: Re: [PATCH net-next V1 0/4] virtio_net: add per queue interrupt
coalescing support
On Mon, Jul 10, 2023 at 12:20:01PM +0300, Gavin Li wrote:
> Currently, coalescing parameters are grouped for all transmit and receive
> virtqueues. This patch series add support to set or get the parameters for
> a specified virtqueue.
>
> When the traffic between virtqueues is unbalanced, for example, one virtqueue
> is busy and another virtqueue is idle, then it will be very useful to
> control coalescing parameters at the virtqueue granularity.
series:
Acked-by: Michael S. Tsirkin <mst@...hat.com>
> Example command:
> $ ethtool -Q eth5 queue_mask 0x1 --coalesce tx-packets 10
> Would set max_packets=10 to VQ 1.
> $ ethtool -Q eth5 queue_mask 0x1 --coalesce rx-packets 10
> Would set max_packets=10 to VQ 0.
> $ ethtool -Q eth5 queue_mask 0x1 --show-coalesce
> Queue: 0
> Adaptive RX: off TX: off
> stats-block-usecs: 0
> sample-interval: 0
> pkt-rate-low: 0
> pkt-rate-high: 0
>
> rx-usecs: 222
> rx-frames: 0
> rx-usecs-irq: 0
> rx-frames-irq: 256
>
> tx-usecs: 222
> tx-frames: 0
> tx-usecs-irq: 0
> tx-frames-irq: 256
>
> rx-usecs-low: 0
> rx-frame-low: 0
> tx-usecs-low: 0
> tx-frame-low: 0
>
> rx-usecs-high: 0
> rx-frame-high: 0
> tx-usecs-high: 0
> tx-frame-high: 0
>
> In this patch series:
> Patch-1: Extract interrupt coalescing settings to a structure.
> Patch-2: Extract get/set interrupt coalesce to a function.
> Patch-3: Support per queue interrupt coalesce command.
> Patch-4: Enable per queue interrupt coalesce feature.
>
> Gavin Li (4):
> virtio_net: extract interrupt coalescing settings to a structure
> virtio_net: extract get/set interrupt coalesce to a function
> virtio_net: support per queue interrupt coalesce command
> virtio_net: enable per queue interrupt coalesce feature
>
> drivers/net/virtio_net.c | 169 ++++++++++++++++++++++++++------
> include/uapi/linux/virtio_net.h | 14 +++
> 2 files changed, 154 insertions(+), 29 deletions(-)
>
> --
> 2.39.1
Powered by blists - more mailing lists