netdev - Re: [PATCH net] net: ena: fix shift-out-of-bounds in exponential backoff

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date: Thu, 13 Jul 2023 17:05:30 -0700
From: Krister Johansen <kjlx@...pleofstupid.com>
To: Shay Agroskin <shayagr@...zon.com>
Cc: Krister Johansen <kjlx@...pleofstupid.com>, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Arthur Kiyanovski <akiyano@...zon.com>,
	David Arinzon <darinzon@...zon.com>, Noam Dagan <ndagan@...zon.com>,
	Saeed Bishara <saeedb@...zon.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Leon Romanovsky <leon@...nel.org>
Subject: Re: [PATCH net] net: ena: fix shift-out-of-bounds in exponential
 backoff

On Thu, Jul 13, 2023 at 10:46:55AM +0300, Shay Agroskin wrote:
> 
> Krister Johansen <kjlx@...pleofstupid.com> writes:
> 
> > 
> > On Tue, Jul 11, 2023 at 08:47:32PM +0300, Shay Agroskin wrote:
> > > 
> > > Krister Johansen <kjlx@...pleofstupid.com> writes:
> > > 
> > > > diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c
> > > > b/drivers/net/ethernet/amazon/ena/ena_com.c
> > > > index 451c3a1b6255..633b321d7fdd 100644
> > > > --- a/drivers/net/ethernet/amazon/ena/ena_com.c
> > > > +++ b/drivers/net/ethernet/amazon/ena/ena_com.c
> > > > @@ -35,6 +35,8 @@
> > > >  #define ENA_REGS_ADMIN_INTR_MASK 1
> > > > +#define ENA_MAX_BACKOFF_DELAY_EXP 16U
> > > > +
> > > >  #define ENA_MIN_ADMIN_POLL_US 100
> > > >  #define ENA_MAX_ADMIN_POLL_US 5000
> > > > @@ -536,6 +538,7 @@ static int >
> > > ena_com_comp_status_to_errno(struct
> > > > ena_com_admin_queue *admin_queue,
> > > >    static void ena_delay_exponential_backoff_us(u32 exp, u32 >
> > > delay_us)
> > > >  {
> > > > +   exp = min_t(u32, exp, ENA_MAX_BACKOFF_DELAY_EXP);
> > > >     delay_us = max_t(u32, ENA_MIN_ADMIN_POLL_US, delay_us);
> > > >     delay_us = min_t(u32, delay_us * (1U << exp), >
> > > ENA_MAX_ADMIN_POLL_US);
> > > >     usleep_range(delay_us, 2 * delay_us);
> > > 
> > > Hi, thanks for submitting this patch (:
> > 
> > Absolutely; thanks for the review!
> > 
> > > Going over the logic here, the driver sleeps for `delay_us`
> > > micro-seconds in
> > > each iteration that this function gets called.
> > > 
> > > For an exp = 14 it'd sleep (I added units notation)
> > > delay_us * (2 ^ exp) us = 100 * (2 ^ 14) us = (10 * (2 ^ 14)) /
> > > (1000000) s
> > > = 1.6 s
> > > 
> > > For an exp = 15 it'd sleep
> > > (10 * (2 ^ 15)) / (1000000) = 3.2s
> > > 
> > > To even get close to an overflow value, say exp=29 the driver would
> > > sleep in
> > > a single iteration
> > > 53687 s = 14.9 hours.
> > > 
> > > The driver should stop trying to get a response from the device
> > > after a
> > > timeout period received from the device which is 3 seconds by
> > > default.
> > > 
> > > The point being, it seems very unlikely to hit this overflow. Did
> > > you
> > > experience it or was the issue discovered by a static analyzer ?
> > 
> > No, no use of fuzzing or static analysis.  This was hit on a production
> > instance that was having ENA trouble.
> > 
> > I'm apparently reading the code differently.  I thought this line:
> > 
> > > >     delay_us = min_t(u32, delay_us * (1U << exp), >
> > > ENA_MAX_ADMIN_POLL_US);
> > 
> > Was going to cap that delay_us at (delay_us * (1U << exp)) or
> > 5000us, whichever is smaller.  By that measure, if delay_us is 100 and
> > ENA_MAX_ADMIN_POLL_US is 5000, this should start getting capped after
> > exp = 6, correct?  By my estimate, that puts it at between 160ms and
> > 320ms of sleeping before one could hit this problem.
> > 
> > I went and pulled the logs out of the archive and have the following
> > timeline.  This is seconds from boot as reported by dmesg:
> > 
> >    11244.226583 - ena warns TX not completed on time, 10112000    usecs
> > since
> >     last napi execution, missing tx timeout val of 5000 msec
> > 
> >    11245.190453 - netdev watchdog fires
> > 
> >    11245.190781 - ena records Transmit timeout
> >    11245.250739 - ena records Trigger reset on
> > 
> >    11246.812620 - UBSAN message to console
> > 
> >    11248.590441 - ena reports Reset inidication didn't turn off
> >    11250.633545 - ena reports failure to reset device
> >    12013.529338 - last logline before new boot
> > 
> > While the difference between the panic and the trigger reset is more
> > than 320ms, it is definitely on the order of seconds instead of hours.
> > 
> 
> Yup you're right. I was so entangled in my exponent calculations that I
> completely missed the min_t expression there.
> 
> That's quite an awkward design to be honest, I hope to submit a re-write for
> it in one of the releases.
> 
> Thanks again for the work you've put into it

Totally welcome. I appreciate the speedy reviews from you and Leon.

Thanks again,

-K