netdev - Re: [PATCH v2 2/2] dt-bindings: net: phy: vsc8531: document 'vsc8531,clkout-freq-mhz' property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230714172444.GA4003281-robh@kernel.org>
Date: Fri, 14 Jul 2023 11:24:44 -0600
From: Rob Herring <robh@...nel.org>
To: Alexandru Ardelean <alex@...uggie.ro>
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org, pabeni@...hat.com, krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org, andrew@...n.ch, hkallweit1@...il.com, linux@...linux.org.uk, olteanv@...il.com, marius.muresan@....ro
Subject: Re: [PATCH v2 2/2] dt-bindings: net: phy: vsc8531: document
 'vsc8531,clkout-freq-mhz' property

On Thu, Jul 13, 2023 at 11:21:23PM +0300, Alexandru Ardelean wrote:
> For VSC8351 and similar PHYs, a new property was added to generate a clock
> signal on the CLKOUT pin.

Sorry, didn't think about it on v1, but I would imagine other vendors' 
PHYs have similar functionality. We should have something common. We 
have the clock binding for clocks already, so we should consider if 
that should be used here. It may look like an overkill for what you 
need, but things always start out that way. What if you want to turn the 
clock on and off as well?

> This change documents the change in the device-tree bindings doc.

That's obvious.

> 
> Signed-off-by: Alexandru Ardelean <alex@...uggie.ro>
> ---
> 
> Changelog v1 -> v2:
> * https://lore.kernel.org/netdev/20230706081554.1616839-2-alex@shruggie.ro/
> * changed property name 'vsc8531,clkout-freq-mhz' -> 'mscc,clkout-freq-mhz'
>   as requested by Rob
> * added 'net-next' tag as requested by Andrew
> 
>  Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
> index 0a3647fe331b..085d0e8a834e 100644
> --- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
> +++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
> @@ -31,6 +31,10 @@ Optional properties:
>  			  VSC8531_LINK_100_ACTIVITY (2),
>  			  VSC8531_LINK_ACTIVITY (0) and
>  			  VSC8531_DUPLEX_COLLISION (8).
> +- mscc,clkout-freq-mhz	: For VSC8531 and similar PHYs, this will output
> +			  a clock signal on the CLKOUT pin of the chip.
> +			  The supported values are 25, 50 & 125 Mhz.
> +			  Default value is no clock signal on the CLKOUT pin.
>  - load-save-gpios	: GPIO used for the load/save operation of the PTP
>  			  hardware clock (PHC).
>  
> @@ -69,5 +73,6 @@ Example:
>                  vsc8531,edge-slowdown	= <7>;
>                  vsc8531,led-0-mode	= <VSC8531_LINK_1000_ACTIVITY>;
>                  vsc8531,led-1-mode	= <VSC8531_LINK_100_ACTIVITY>;
> +                mscc,clkout-freq-mhz	= <50>;
>  		load-save-gpios		= <&gpio 10 GPIO_ACTIVE_HIGH>;
>          };
> -- 
> 2.41.0
>