[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CACWXhKn1V-jMjsmV2kHEvG-Kn_vp4v22145MZdy-zdKaywPrmw@mail.gmail.com>
Date: Fri, 14 Jul 2023 10:41:45 +0800
From: Feiyang Chen <chris.chenfeiyang@...il.com>
To: "Russell King (Oracle)" <linux@...linux.org.uk>
Cc: Feiyang Chen <chenfeiyang@...ngson.cn>, andrew@...n.ch, hkallweit1@...il.com,
peppe.cavallaro@...com, alexandre.torgue@...s.st.com, joabreu@...opsys.com,
chenhuacai@...ngson.cn, dongbiao@...ngson.cn,
loongson-kernel@...ts.loongnix.cn, netdev@...r.kernel.org,
loongarch@...ts.linux.dev
Subject: Re: [RFC PATCH 01/10] net: phy: Add driver for Loongson PHY
On Thu, Jul 13, 2023 at 3:53 PM Russell King (Oracle)
<linux@...linux.org.uk> wrote:
>
> On Thu, Jul 13, 2023 at 10:46:53AM +0800, Feiyang Chen wrote:
> > +#define PHY_ID_LS7A2000 0x00061ce0
> > +#define GNET_REV_LS7A2000 0x00
> > +
> > +static int ls7a2000_config_aneg(struct phy_device *phydev)
> > +{
> > + if (phydev->speed == SPEED_1000)
> > + phydev->autoneg = AUTONEG_ENABLE;
> > +
> > + if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
> > + phydev->advertising) ||
> > + linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
> > + phydev->advertising) ||
> > + linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
> > + phydev->advertising))
> > + return genphy_config_aneg(phydev);
>
> While it's fine to use four spaces within the if () expression, this
> "return" should be indented with a tab.
>
Hi, Russell,
Sorry for the typo. I will correct it in the next version.
> > +
> > + netdev_info(phydev->attached_dev, "Parameter Setting Error\n");
>
> Does this give the opportunity for userspace to spam the kernel log?
> E.g. by a daemon repeatedly trying to set link parameters? Should it
> be rate limited?
>
> > + return -1;
>
> Sigh, not this laziness disease yet again. -1 is -EPERM. Return a
> real errno code.
>
OK.
> > +int ls7a2000_match_phy_device(struct phy_device *phydev)
> > +{
> > + struct net_device *ndev;
> > + struct pci_dev *pdev;
> > +
> > + if ((phydev->phy_id & 0xfffffff0) != PHY_ID_LS7A2000)
> > + return 0;
>
> if (!phy_id_compare(phydev->phy_id, PHY_ID_LS7A2000, 0xfffffff0))
> return 0;
>
OK.
> > +
> > + ndev = phydev->mdio.bus->priv;
>
> This doesn't look safe to me - you're assuming that if the PHY ID
> above matches, that the MDIO bus' private data is something you know
> which is far from guaranteed.
>
> The mdio bus has a parent device - that would be a safer route to
> check what the parent device is, provided the mdio bus is created so
> that it's a child of the parent PCI device.
>
OK. I’ll get right on that.
Thanks,
Feiyang
> --
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists