[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1080145252.21240687.1689535569748.JavaMail.root@zimbra64-e11.priv.proxad.net>
Date: Sun, 16 Jul 2023 21:26:09 +0200 (CEST)
From: Eric Chastan <ericchastan@...e.fr>
To: netdev@...r.kernel.org
Subject: r8169 stuck at 100 Mbps
Dear developers,
I am getting in touch because I have trouble getting module r8169 handle gigabit speeds.
You will find my setup attached.
Here is the ouptput of ethtool:
$ sudo ethtool enp2s0
Settings for enp2s0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: off
master-slave cfg: preferred slave
master-slave status: slave
Port: Twisted Pair
PHYAD: 0
Transceiver: external
MDI-X: Unknown
Supports Wake-on: pumbg
Wake-on: d
Link detected: yes
I use a cat6 cable and tried others gigabit capable cables too. Module r8168-dkms does not change the speed I get either.
Could you please give me any hint on how to solve the problem?
Thank you very much for your help.
Best regards,
Eric
Download attachment "252147836-30d93ee1-ad9d-4a78-86d7-8694f921b479.png" of type "image/png" (133116 bytes)
Download attachment "252147846-f23e93ad-2013-4f88-8498-c150c83406d7.png" of type "image/png" (215985 bytes)
Powered by blists - more mailing lists