netdev - [net PATCH V3 2/2] octeontx2-af: Fix hash extraction enable configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230716193049.2499410-3-sumang@marvell.com>
Date: Mon, 17 Jul 2023 01:00:49 +0530
From: Suman Ghosh <sumang@...vell.com>
To: <sgoutham@...vell.com>, <gakula@...vell.com>, <sbhatta@...vell.com>,
        <hkelam@...vell.com>, <davem@...emloft.net>, <edumazet@...gle.com>,
        <kuba@...nel.org>, <pabeni@...hat.com>, <netdev@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
CC: Suman Ghosh <sumang@...vell.com>
Subject: [net PATCH V3 2/2] octeontx2-af: Fix hash extraction enable configuration

As of today, hash extraction support is enabled for all the silicons.
Because of which we are facing initialization issues when the silicon
does not support hash extraction. During creation of the hardware
parsing table for IPv6 address, we need to consider if hash extraction
is enabled then extract only 32 bit, otherwise 128 bit needs to be
extracted. This patch fixes the issue and configures the hardware parser
based on the availability of the feature.

Fixes: a95ab93550d3 ("octeontx2-af: Use hashed field in MCAM key")
Signed-off-by: Suman Ghosh <sumang@...vell.com>
---
 .../marvell/octeontx2/af/rvu_npc_hash.c       | 43 ++++++++++++++++++-
 .../marvell/octeontx2/af/rvu_npc_hash.h       |  8 ++--
 2 files changed, 46 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c
index a3bc53d22dc0..c4c45dea0f39 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c
@@ -218,13 +218,54 @@ void npc_config_secret_key(struct rvu *rvu, int blkaddr)
 
 void npc_program_mkex_hash(struct rvu *rvu, int blkaddr)
 {
+	struct npc_mcam_kex_hash *mh = rvu->kpu.mkex_hash;
 	struct hw_cap *hwcap = &rvu->hw->cap;
+	u8 intf, ld, hdr_offset, byte_len;
 	struct rvu_hwinfo *hw = rvu->hw;
-	u8 intf;
+	u64 cfg;
 
+	/* Check if hardware supports hash extraction */
 	if (!hwcap->npc_hash_extract)
 		return;
 
+	/* Check if IPv6 source/destination address
+	 * should be hash enabled.
+	 * Hashing reduces 128bit SIP/DIP fields to 32bit
+	 * so that 224 bit X2 key can be used for IPv6 based filters as well,
+	 * which in turn results in more number of MCAM entries available for
+	 * use.
+	 *
+	 * Hashing of IPV6 SIP/DIP is enabled in below scenarios
+	 * 1. If the silicon variant supports hashing feature
+	 * 2. If the number of bytes of IP addr being extracted is 4 bytes ie
+	 *    32bit. The assumption here is that if user wants 8bytes of LSB of
+	 *    IP addr or full 16 bytes then his intention is not to use 32bit
+	 *    hash.
+	 */
+	for (intf = 0; intf < hw->npc_intfs; intf++) {
+		for (ld = 0; ld < NPC_MAX_LD; ld++) {
+			cfg = rvu_read64(rvu, blkaddr,
+					 NPC_AF_INTFX_LIDX_LTX_LDX_CFG(intf,
+								       NPC_LID_LC,
+								       NPC_LT_LC_IP6,
+								       ld));
+			hdr_offset = FIELD_GET(NPC_HDR_OFFSET, cfg);
+			byte_len = FIELD_GET(NPC_BYTESM, cfg);
+			/* Hashing of IPv6 source/destination address should be
+			 * enabled if,
+			 * hdr_offset == 8 (offset of source IPv6 address) or
+			 * hdr_offset == 24 (offset of destination IPv6)
+			 * address) and the number of byte to be
+			 * extracted is 4. As per hardware configuration
+			 * byte_len should be == actual byte_len - 1.
+			 * Hence byte_len is checked against 3 but nor 4.
+			 */
+			if ((hdr_offset == 8 || hdr_offset == 24) && byte_len == 3)
+				mh->lid_lt_ld_hash_en[intf][NPC_LID_LC][NPC_LT_LC_IP6][ld] = true;
+		}
+	}
+
+	/* Update hash configuration if the field is hash enabled */
 	for (intf = 0; intf < hw->npc_intfs; intf++) {
 		npc_program_mkex_hash_rx(rvu, blkaddr, intf);
 		npc_program_mkex_hash_tx(rvu, blkaddr, intf);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.h
index eb9cb311b934..df6c6016827d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.h
@@ -73,8 +73,8 @@ static struct npc_mcam_kex_hash npc_mkex_hash_default __maybe_unused = {
 	[NIX_INTF_RX] = {
 		[NPC_LID_LC] = {
 			[NPC_LT_LC_IP6] = {
-				true,
-				true,
+				false,
+				false,
 			},
 		},
 	},
@@ -82,8 +82,8 @@ static struct npc_mcam_kex_hash npc_mkex_hash_default __maybe_unused = {
 	[NIX_INTF_TX] = {
 		[NPC_LID_LC] = {
 			[NPC_LT_LC_IP6] = {
-				true,
-				true,
+				false,
+				false,
 			},
 		},
 	},
-- 
2.25.1