netdev - Re: [PATCH net-next 2/2] net: stmmac: platform: add support for phy-supply

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230718083504.r3znx6iixtq7vkjt@pengutronix.de>
Date: Tue, 18 Jul 2023 10:35:04 +0200
From: Marco Felsch <m.felsch@...gutronix.de>
To: Andrew Lunn <andrew@...n.ch>
Cc: davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
	pabeni@...hat.com, robh+dt@...nel.org,
	krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
	peppe.cavallaro@...com, alexandre.torgue@...s.st.com,
	joabreu@...opsys.com, mcoquelin.stm32@...il.com,
	netdev@...r.kernel.org, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-stm32@...md-mailman.stormreply.com,
	linux-arm-kernel@...ts.infradead.org, kernel@...gutronix.de
Subject: Re: [PATCH net-next 2/2] net: stmmac: platform: add support for
 phy-supply

On 23-07-18, Andrew Lunn wrote:
> On Mon, Jul 17, 2023 at 06:43:07PM +0200, Marco Felsch wrote:
> > Add generic phy-supply handling support to control the phy regulator.
> > Use the common stmmac_platform code path so all drivers using
> > stmmac_probe_config_dt() and stmmac_pltfr_pm_ops can use it.
> > 
> > Signed-off-by: Marco Felsch <m.felsch@...gutronix.de>
> > ---
> >  .../ethernet/stmicro/stmmac/stmmac_platform.c | 51 +++++++++++++++++++
> >  include/linux/stmmac.h                        |  1 +
> >  2 files changed, 52 insertions(+)
> > 
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > index eb0b2898daa3d..6193d42b53fb7 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > @@ -10,6 +10,7 @@
> >  
> >  #include <linux/platform_device.h>
> >  #include <linux/pm_runtime.h>
> > +#include <linux/regulator/consumer.h>
> >  #include <linux/module.h>
> >  #include <linux/io.h>
> >  #include <linux/of.h>
> > @@ -423,6 +424,15 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
> >  	if (plat->interface < 0)
> >  		plat->interface = plat->phy_interface;
> >  
> > +	/* Optional regulator for PHY */
> > +	plat->phy_regulator = devm_regulator_get_optional(&pdev->dev, "phy");
> > +	if (IS_ERR(plat->phy_regulator)) {
> > +		if (PTR_ERR(plat->phy_regulator) == -EPROBE_DEFER)
> > +			return ERR_CAST(plat->phy_regulator);
> > +		dev_info(&pdev->dev, "No regulator found\n");
> > +		plat->phy_regulator = NULL;
> > +	}
> > +
> 
> So this gets the regulator. When do you actually turn it on?

During the suspend/resume logic like the rockchip, sun8i platform
integrations did.

Regards,
  Marco

> 
>      Andrew
>