netdev - RE: [PATCH net] net: phy: marvell10g: fix 88x3310 power up

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <013e01d9b95e$66c10350$344309f0$@trustnetic.com>
Date: Tue, 18 Jul 2023 17:58:28 +0800
From: Jiawen Wu <jiawenwu@...stnetic.com>
To: "'Russell King \(Oracle\)'" <linux@...linux.org.uk>
Cc: "'Simon Horman'" <simon.horman@...igine.com>,
	<kabel@...nel.org>,
	<andrew@...n.ch>,
	<hkallweit1@...il.com>,
	<davem@...emloft.net>,
	<edumazet@...gle.com>,
	<kuba@...nel.org>,
	<pabeni@...hat.com>,
	<netdev@...r.kernel.org>
Subject: RE: [PATCH net] net: phy: marvell10g: fix 88x3310 power up

On Tuesday, July 18, 2023 5:49 PM, Russell King (Oracle) wrote:
> On Tue, Jul 18, 2023 at 05:12:33PM +0800, Jiawen Wu wrote:
> > On Monday, July 17, 2023 8:23 PM, Russell King (Oracle) wrote:
> > > On Mon, Jul 17, 2023 at 06:51:38PM +0800, Jiawen Wu wrote:
> > > > > > > > There are two places that mv3310_reset() is called, mv3310_config_mdix()
> > > > > > > > and mv3310_set_edpd(). One of them is in the probe function, after we
> > > > > > > > have powered up the PHY.
> > > > > > > >
> > > > > > > > I think we need much more information from the reporter before we can
> > > > > > > > guess which commit is a problem, if any.
> > > > > > > >
> > > > > > > > When does the reset time out?
> > > > > > > > What is the code path that we see mv3310_reset() timing out?
> > > > > > > > Does the problem happen while resuming or probing?
> > > > > > > > How soon after clearing the power down bit is mv3310_reset() called?
> > > > > > >
> > > > > > > I need to test it more times for more information.
> > > > > > >
> > > > > > > As far as I know, reset timeout appears in mv3310_set_edpd(), after mv3310_power_up()
> > > > > > > in mv3310_config_init().
> > > > > > >
> > > > > > > Now what I'm confused about is, sometimes there was weird values while probing, just
> > > > > > > to read out a weird firmware version, that caused the test to fail.
> > > > > > >
> > > > > > > And for this phy_read_mmd_poll_timeout(), it only succeeds when sleep_before_read = true.
> > > > > > > Otherwise, it would never succeed to clear the power down bit. Currently it looks like clearing
> > > > > > > the bit takes about 1ms.
> > > > > >
> > > > > > So, reading the bit before the first delay period results in the bit not
> > > > > > clearing, despite having written it to be zero?
> > > > >
> > > > > Yes. So in the original code, there is no delay to read the register again for
> > > > > setting software reset bit. I think the power down bit is not actually cleared
> > > > > in my test.
> > > >
> > > > Hi Russell,
> > > >
> > > > I confirmed last week that this change is valid to make mv3310_reset() success.
> > > > But now reset fails again, only on port 0. Reset timeout still appears in
> > > > mv3310_config_init() -> mv3310_set_edpd() -> mv3310_reset(). I deleted this
> > > > change to test again, and the result shows that this change is valid for port 1.
> > > >
> > > > So I'm a little confused. Since I don't have programming guidelines for this PHY,
> > > > but only a datasheet. Could you please help to check for any possible problems
> > > > with it?
> > >
> > > I think the question that's missing is... why do other 88x3310 users not
> > > see this problem - what is special about your port 0?
> > >
> > > Maybe there's a clue with the hardware schematics? Do you have access to
> > > those?
> >
> > This problem never happened again after I poweroff and restart the machine.
> > However, this patch is still required to successfully probe the PHY.
> >
> > One thing I've noticed is that there is restriction in mv3310_power_up(), software
> > reset not performed when priv->firmware_ver < 0x00030000. And my 88x3310's
> > firmware version happens to 0x20200. Will this restriction cause subsequent reset
> > timeout(without this patch)?
> 
> We (Matteo and I) discovered the need for software reset by
> experimentation on his Macchiatobin and trying different firmware
> versions. Essentially, I had 0.2.1.0 which didn't need the software
> reset, Matteo had 0.3.3.0 which did seem to need it.
> 
> I also upgraded my firmware to 0.3.3.0 and even 0.3.10.0 and confirmed
> that the software reset works on the two PHYs on my boards.
> 
> What I don't understand is "this patch is still required to successfully
> probe the PHY". The power-up path is not called during probe - nor is
> the EDPD path. By "probe" I'm assuming we're talking about the driver
> probe, in other words, mv3310_probe(), not the config_init - it may be
> that you're terminology is not matching phylib's terminology. Please
> can you clarify.

I'm sorry for the mistake in my description. I mean MAC driver probe, in fact
it is in phy_connect_direct(), to call mv3310_config_init().