| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230605-ep93xx-v3-39-3d63a5f1103e@maquefel.me>
Date: Thu, 20 Jul 2023 14:29:39 +0300
From:
Nikita Shubin via B4 Relay <devnull+nikita.shubin.maquefel.me@...nel.org>
To: Hartley Sweeten <hsweeten@...ionengravers.com>,
Lennert Buytenhek <kernel@...tstofly.org>,
Alexander Sverdlin <alexander.sverdlin@...il.com>,
Russell King <linux@...linux.org.uk>, Lukasz Majewski <lukma@...x.de>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Nikita Shubin <nikita.shubin@...uefel.me>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>,
Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Guenter Roeck <linux@...ck-us.net>, Sebastian Reichel <sre@...nel.org>,
Thierry Reding <thierry.reding@...il.com>,
Uwe Kleine-König <u.kleine-koenig@...gutronix.de>,
Mark Brown <broonie@...nel.org>, "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Vinod Koul <vkoul@...nel.org>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>, Vignesh Raghavendra <vigneshr@...com>,
Damien Le Moal <dlemoal@...nel.org>, Sergey Shtylyov <s.shtylyov@....ru>,
Dmitry Torokhov <dmitry.torokhov@...il.com>, Arnd Bergmann <arnd@...db.de>,
Olof Johansson <olof@...om.net>, soc@...nel.org,
Liam Girdwood <lgirdwood@...il.com>, Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>, Andy Shevchenko <andy@...nel.org>,
Michael Peters <mpeters@...eddedTS.com>, Kris Bahnsen <kris@...eddedTS.com>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-clk@...r.kernel.org, linux-rtc@...r.kernel.org,
linux-watchdog@...r.kernel.org, linux-pm@...r.kernel.org,
linux-pwm@...r.kernel.org, linux-spi@...r.kernel.org,
netdev@...r.kernel.org, dmaengine@...r.kernel.org,
linux-mtd@...ts.infradead.org, linux-ide@...r.kernel.org,
linux-input@...r.kernel.org, alsa-devel@...a-project.org
Subject: [PATCH v3 39/42] ARM: ep93xx: delete all boardfiles
From: Nikita Shubin <nikita.shubin@...uefel.me>
Delete the ep93xx board files.
Signed-off-by: Nikita Shubin <nikita.shubin@...uefel.me>
---
arch/arm/mach-ep93xx/clock.c | 733 ---------------------------
arch/arm/mach-ep93xx/core.c | 954 -----------------------------------
arch/arm/mach-ep93xx/dma.c | 114 -----
arch/arm/mach-ep93xx/edb93xx.c | 344 -------------
arch/arm/mach-ep93xx/ep93xx-regs.h | 38 --
arch/arm/mach-ep93xx/gpio-ep93xx.h | 111 ----
arch/arm/mach-ep93xx/hardware.h | 25 -
arch/arm/mach-ep93xx/irqs.h | 76 ---
arch/arm/mach-ep93xx/platform.h | 42 --
arch/arm/mach-ep93xx/soc.h | 212 --------
arch/arm/mach-ep93xx/timer-ep93xx.c | 143 ------
arch/arm/mach-ep93xx/ts72xx.c | 422 ----------------
arch/arm/mach-ep93xx/ts72xx.h | 94 ----
arch/arm/mach-ep93xx/vision_ep9307.c | 311 ------------
14 files changed, 3619 deletions(-)
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
deleted file mode 100644
index 85a496ddc619..000000000000
--- a/arch/arm/mach-ep93xx/clock.c
+++ /dev/null
@@ -1,733 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/clock.c
- * Clock control for Cirrus EP93xx chips.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@...tstofly.org>
- */
-
-#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <linux/soc/cirrus/ep93xx.h>
-
-#include "hardware.h"
-
-#include <asm/div64.h>
-
-#include "soc.h"
-
-static DEFINE_SPINLOCK(clk_lock);
-
-static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
-static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
-static char pclk_divisors[] = { 1, 2, 4, 8 };
-
-static char adc_divisors[] = { 16, 4 };
-static char sclk_divisors[] = { 2, 4 };
-static char lrclk_divisors[] = { 32, 64, 128 };
-
-static const char * const mux_parents[] = {
- "xtali",
- "pll1",
- "pll2"
-};
-
-/*
- * PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS
- */
-static unsigned long calc_pll_rate(unsigned long long rate, u32 config_word)
-{
- int i;
-
- rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */
- rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */
- do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */
- for (i = 0; i < ((config_word >> 16) & 3); i++) /* PS */
- rate >>= 1;
-
- return (unsigned long)rate;
-}
-
-struct clk_psc {
- struct clk_hw hw;
- void __iomem *reg;
- u8 bit_idx;
- u32 mask;
- u8 shift;
- u8 width;
- char *div;
- u8 num_div;
- spinlock_t *lock;
-};
-
-#define to_clk_psc(_hw) container_of(_hw, struct clk_psc, hw)
-
-static int ep93xx_clk_is_enabled(struct clk_hw *hw)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- u32 val = readl(psc->reg);
-
- return (val & BIT(psc->bit_idx)) ? 1 : 0;
-}
-
-static int ep93xx_clk_enable(struct clk_hw *hw)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- unsigned long flags = 0;
- u32 val;
-
- if (psc->lock)
- spin_lock_irqsave(psc->lock, flags);
-
- val = __raw_readl(psc->reg);
- val |= BIT(psc->bit_idx);
-
- ep93xx_syscon_swlocked_write(val, psc->reg);
-
- if (psc->lock)
- spin_unlock_irqrestore(psc->lock, flags);
-
- return 0;
-}
-
-static void ep93xx_clk_disable(struct clk_hw *hw)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- unsigned long flags = 0;
- u32 val;
-
- if (psc->lock)
- spin_lock_irqsave(psc->lock, flags);
-
- val = __raw_readl(psc->reg);
- val &= ~BIT(psc->bit_idx);
-
- ep93xx_syscon_swlocked_write(val, psc->reg);
-
- if (psc->lock)
- spin_unlock_irqrestore(psc->lock, flags);
-}
-
-static const struct clk_ops clk_ep93xx_gate_ops = {
- .enable = ep93xx_clk_enable,
- .disable = ep93xx_clk_disable,
- .is_enabled = ep93xx_clk_is_enabled,
-};
-
-static struct clk_hw *ep93xx_clk_register_gate(const char *name,
- const char *parent_name,
- void __iomem *reg,
- u8 bit_idx)
-{
- struct clk_init_data init;
- struct clk_psc *psc;
- struct clk *clk;
-
- psc = kzalloc(sizeof(*psc), GFP_KERNEL);
- if (!psc)
- return ERR_PTR(-ENOMEM);
-
- init.name = name;
- init.ops = &clk_ep93xx_gate_ops;
- init.flags = CLK_SET_RATE_PARENT;
- init.parent_names = (parent_name ? &parent_name : NULL);
- init.num_parents = (parent_name ? 1 : 0);
-
- psc->reg = reg;
- psc->bit_idx = bit_idx;
- psc->hw.init = &init;
- psc->lock = &clk_lock;
-
- clk = clk_register(NULL, &psc->hw);
- if (IS_ERR(clk)) {
- kfree(psc);
- return ERR_CAST(clk);
- }
-
- return &psc->hw;
-}
-
-static u8 ep93xx_mux_get_parent(struct clk_hw *hw)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- u32 val = __raw_readl(psc->reg);
-
- if (!(val & EP93XX_SYSCON_CLKDIV_ESEL))
- return 0;
-
- if (!(val & EP93XX_SYSCON_CLKDIV_PSEL))
- return 1;
-
- return 2;
-}
-
-static int ep93xx_mux_set_parent_lock(struct clk_hw *hw, u8 index)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- unsigned long flags = 0;
- u32 val;
-
- if (index >= ARRAY_SIZE(mux_parents))
- return -EINVAL;
-
- if (psc->lock)
- spin_lock_irqsave(psc->lock, flags);
-
- val = __raw_readl(psc->reg);
- val &= ~(EP93XX_SYSCON_CLKDIV_ESEL | EP93XX_SYSCON_CLKDIV_PSEL);
-
-
- if (index != 0) {
- val |= EP93XX_SYSCON_CLKDIV_ESEL;
- val |= (index - 1) ? EP93XX_SYSCON_CLKDIV_PSEL : 0;
- }
-
- ep93xx_syscon_swlocked_write(val, psc->reg);
-
- if (psc->lock)
- spin_unlock_irqrestore(psc->lock, flags);
-
- return 0;
-}
-
-static bool is_best(unsigned long rate, unsigned long now,
- unsigned long best)
-{
- return abs(rate - now) < abs(rate - best);
-}
-
-static int ep93xx_mux_determine_rate(struct clk_hw *hw,
- struct clk_rate_request *req)
-{
- unsigned long rate = req->rate;
- struct clk *best_parent = NULL;
- unsigned long __parent_rate;
- unsigned long best_rate = 0, actual_rate, mclk_rate;
- unsigned long best_parent_rate;
- int __div = 0, __pdiv = 0;
- int i;
-
- /*
- * Try the two pll's and the external clock
- * Because the valid predividers are 2, 2.5 and 3, we multiply
- * all the clocks by 2 to avoid floating point math.
- *
- * This is based on the algorithm in the ep93xx raster guide:
- * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf
- *
- */
- for (i = 0; i < ARRAY_SIZE(mux_parents); i++) {
- struct clk *parent = clk_get_sys(mux_parents[i], NULL);
-
- __parent_rate = clk_get_rate(parent);
- mclk_rate = __parent_rate * 2;
-
- /* Try each predivider value */
- for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
- __div = mclk_rate / (rate * __pdiv);
- if (__div < 2 || __div > 127)
- continue;
-
- actual_rate = mclk_rate / (__pdiv * __div);
- if (is_best(rate, actual_rate, best_rate)) {
- best_rate = actual_rate;
- best_parent_rate = __parent_rate;
- best_parent = parent;
- }
- }
- }
-
- if (!best_parent)
- return -EINVAL;
-
- req->best_parent_rate = best_parent_rate;
- req->best_parent_hw = __clk_get_hw(best_parent);
- req->rate = best_rate;
-
- return 0;
-}
-
-static unsigned long ep93xx_ddiv_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- unsigned long rate = 0;
- u32 val = __raw_readl(psc->reg);
- int __pdiv = ((val >> EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) & 0x03);
- int __div = val & 0x7f;
-
- if (__div > 0)
- rate = (parent_rate * 2) / ((__pdiv + 3) * __div);
-
- return rate;
-}
-
-static int ep93xx_ddiv_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- int pdiv = 0, div = 0;
- unsigned long best_rate = 0, actual_rate, mclk_rate;
- int __div = 0, __pdiv = 0;
- u32 val;
-
- mclk_rate = parent_rate * 2;
-
- for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
- __div = mclk_rate / (rate * __pdiv);
- if (__div < 2 || __div > 127)
- continue;
-
- actual_rate = mclk_rate / (__pdiv * __div);
- if (is_best(rate, actual_rate, best_rate)) {
- pdiv = __pdiv - 3;
- div = __div;
- best_rate = actual_rate;
- }
- }
-
- if (!best_rate)
- return -EINVAL;
-
- val = __raw_readl(psc->reg);
-
- /* Clear old dividers */
- val &= ~0x37f;
-
- /* Set the new pdiv and div bits for the new clock rate */
- val |= (pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div;
- ep93xx_syscon_swlocked_write(val, psc->reg);
-
- return 0;
-}
-
-static const struct clk_ops clk_ddiv_ops = {
- .enable = ep93xx_clk_enable,
- .disable = ep93xx_clk_disable,
- .is_enabled = ep93xx_clk_is_enabled,
- .get_parent = ep93xx_mux_get_parent,
- .set_parent = ep93xx_mux_set_parent_lock,
- .determine_rate = ep93xx_mux_determine_rate,
- .recalc_rate = ep93xx_ddiv_recalc_rate,
- .set_rate = ep93xx_ddiv_set_rate,
-};
-
-static struct clk_hw *clk_hw_register_ddiv(const char *name,
- void __iomem *reg,
- u8 bit_idx)
-{
- struct clk_init_data init;
- struct clk_psc *psc;
- struct clk *clk;
-
- psc = kzalloc(sizeof(*psc), GFP_KERNEL);
- if (!psc)
- return ERR_PTR(-ENOMEM);
-
- init.name = name;
- init.ops = &clk_ddiv_ops;
- init.flags = 0;
- init.parent_names = mux_parents;
- init.num_parents = ARRAY_SIZE(mux_parents);
-
- psc->reg = reg;
- psc->bit_idx = bit_idx;
- psc->lock = &clk_lock;
- psc->hw.init = &init;
-
- clk = clk_register(NULL, &psc->hw);
- if (IS_ERR(clk)) {
- kfree(psc);
- return ERR_CAST(clk);
- }
- return &psc->hw;
-}
-
-static unsigned long ep93xx_div_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- u32 val = __raw_readl(psc->reg);
- u8 index = (val & psc->mask) >> psc->shift;
-
- if (index > psc->num_div)
- return 0;
-
- return DIV_ROUND_UP_ULL(parent_rate, psc->div[index]);
-}
-
-static long ep93xx_div_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *parent_rate)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- unsigned long best = 0, now, maxdiv;
- int i;
-
- maxdiv = psc->div[psc->num_div - 1];
-
- for (i = 0; i < psc->num_div; i++) {
- if ((rate * psc->div[i]) == *parent_rate)
- return DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]);
-
- now = DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]);
-
- if (is_best(rate, now, best))
- best = now;
- }
-
- if (!best)
- best = DIV_ROUND_UP_ULL(*parent_rate, maxdiv);
-
- return best;
-}
-
-static int ep93xx_div_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- u32 val = __raw_readl(psc->reg) & ~psc->mask;
- int i;
-
- for (i = 0; i < psc->num_div; i++)
- if (rate == parent_rate / psc->div[i]) {
- val |= i << psc->shift;
- break;
- }
-
- if (i == psc->num_div)
- return -EINVAL;
-
- ep93xx_syscon_swlocked_write(val, psc->reg);
-
- return 0;
-}
-
-static const struct clk_ops ep93xx_div_ops = {
- .enable = ep93xx_clk_enable,
- .disable = ep93xx_clk_disable,
- .is_enabled = ep93xx_clk_is_enabled,
- .recalc_rate = ep93xx_div_recalc_rate,
- .round_rate = ep93xx_div_round_rate,
- .set_rate = ep93xx_div_set_rate,
-};
-
-static struct clk_hw *clk_hw_register_div(const char *name,
- const char *parent_name,
- void __iomem *reg,
- u8 enable_bit,
- u8 shift,
- u8 width,
- char *clk_divisors,
- u8 num_div)
-{
- struct clk_init_data init;
- struct clk_psc *psc;
- struct clk *clk;
-
- psc = kzalloc(sizeof(*psc), GFP_KERNEL);
- if (!psc)
- return ERR_PTR(-ENOMEM);
-
- init.name = name;
- init.ops = &ep93xx_div_ops;
- init.flags = 0;
- init.parent_names = (parent_name ? &parent_name : NULL);
- init.num_parents = 1;
-
- psc->reg = reg;
- psc->bit_idx = enable_bit;
- psc->mask = GENMASK(shift + width - 1, shift);
- psc->shift = shift;
- psc->div = clk_divisors;
- psc->num_div = num_div;
- psc->lock = &clk_lock;
- psc->hw.init = &init;
-
- clk = clk_register(NULL, &psc->hw);
- if (IS_ERR(clk)) {
- kfree(psc);
- return ERR_CAST(clk);
- }
- return &psc->hw;
-}
-
-struct ep93xx_gate {
- unsigned int bit;
- const char *dev_id;
- const char *con_id;
-};
-
-static struct ep93xx_gate ep93xx_uarts[] = {
- {EP93XX_SYSCON_DEVCFG_U1EN, "apb:uart1", NULL},
- {EP93XX_SYSCON_DEVCFG_U2EN, "apb:uart2", NULL},
- {EP93XX_SYSCON_DEVCFG_U3EN, "apb:uart3", NULL},
-};
-
-static void __init ep93xx_uart_clock_init(void)
-{
- unsigned int i;
- struct clk_hw *hw;
- u32 value;
- unsigned int clk_uart_div;
-
- value = __raw_readl(EP93XX_SYSCON_PWRCNT);
- if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
- clk_uart_div = 1;
- else
- clk_uart_div = 2;
-
- hw = clk_hw_register_fixed_factor(NULL, "uart", "xtali", 0, 1, clk_uart_div);
-
- /* parenting uart gate clocks to uart clock */
- for (i = 0; i < ARRAY_SIZE(ep93xx_uarts); i++) {
- hw = ep93xx_clk_register_gate(ep93xx_uarts[i].dev_id,
- "uart",
- EP93XX_SYSCON_DEVCFG,
- ep93xx_uarts[i].bit);
-
- clk_hw_register_clkdev(hw, NULL, ep93xx_uarts[i].dev_id);
- }
-}
-
-static struct ep93xx_gate ep93xx_dmas[] = {
- {EP93XX_SYSCON_PWRCNT_DMA_M2P0, NULL, "m2p0"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P1, NULL, "m2p1"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P2, NULL, "m2p2"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P3, NULL, "m2p3"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P4, NULL, "m2p4"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P5, NULL, "m2p5"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P6, NULL, "m2p6"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P7, NULL, "m2p7"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P8, NULL, "m2p8"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P9, NULL, "m2p9"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2M0, NULL, "m2m0"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2M1, NULL, "m2m1"},
-};
-
-static void __init ep93xx_dma_clock_init(void)
-{
- unsigned int i;
- struct clk_hw *hw;
- int ret;
-
- for (i = 0; i < ARRAY_SIZE(ep93xx_dmas); i++) {
- hw = clk_hw_register_gate(NULL, ep93xx_dmas[i].con_id,
- "hclk", 0,
- EP93XX_SYSCON_PWRCNT,
- ep93xx_dmas[i].bit,
- 0,
- &clk_lock);
-
- ret = clk_hw_register_clkdev(hw, ep93xx_dmas[i].con_id, NULL);
- if (ret)
- pr_err("%s: failed to register lookup %s\n",
- __func__, ep93xx_dmas[i].con_id);
- }
-}
-
-static int __init ep93xx_clock_init(void)
-{
- u32 value;
- struct clk_hw *hw;
- unsigned long clk_pll1_rate;
- unsigned long clk_f_rate;
- unsigned long clk_h_rate;
- unsigned long clk_p_rate;
- unsigned long clk_pll2_rate;
- unsigned int clk_f_div;
- unsigned int clk_h_div;
- unsigned int clk_p_div;
- unsigned int clk_usb_div;
- unsigned long clk_spi_div;
-
- hw = clk_hw_register_fixed_rate(NULL, "xtali", NULL, 0, EP93XX_EXT_CLK_RATE);
- clk_hw_register_clkdev(hw, NULL, "xtali");
-
- /* Determine the bootloader configured pll1 rate */
- value = __raw_readl(EP93XX_SYSCON_CLKSET1);
- if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1))
- clk_pll1_rate = EP93XX_EXT_CLK_RATE;
- else
- clk_pll1_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value);
-
- hw = clk_hw_register_fixed_rate(NULL, "pll1", "xtali", 0, clk_pll1_rate);
- clk_hw_register_clkdev(hw, NULL, "pll1");
-
- /* Initialize the pll1 derived clocks */
- clk_f_div = fclk_divisors[(value >> 25) & 0x7];
- clk_h_div = hclk_divisors[(value >> 20) & 0x7];
- clk_p_div = pclk_divisors[(value >> 18) & 0x3];
-
- hw = clk_hw_register_fixed_factor(NULL, "fclk", "pll1", 0, 1, clk_f_div);
- clk_f_rate = clk_get_rate(hw->clk);
- hw = clk_hw_register_fixed_factor(NULL, "hclk", "pll1", 0, 1, clk_h_div);
- clk_h_rate = clk_get_rate(hw->clk);
- hw = clk_hw_register_fixed_factor(NULL, "pclk", "hclk", 0, 1, clk_p_div);
- clk_p_rate = clk_get_rate(hw->clk);
-
- clk_hw_register_clkdev(hw, "apb_pclk", NULL);
-
- ep93xx_dma_clock_init();
-
- /* Determine the bootloader configured pll2 rate */
- value = __raw_readl(EP93XX_SYSCON_CLKSET2);
- if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2))
- clk_pll2_rate = EP93XX_EXT_CLK_RATE;
- else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN)
- clk_pll2_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value);
- else
- clk_pll2_rate = 0;
-
- hw = clk_hw_register_fixed_rate(NULL, "pll2", "xtali", 0, clk_pll2_rate);
- clk_hw_register_clkdev(hw, NULL, "pll2");
-
- /* Initialize the pll2 derived clocks */
- /*
- * These four bits set the divide ratio between the PLL2
- * output and the USB clock.
- * 0000 - Divide by 1
- * 0001 - Divide by 2
- * 0010 - Divide by 3
- * 0011 - Divide by 4
- * 0100 - Divide by 5
- * 0101 - Divide by 6
- * 0110 - Divide by 7
- * 0111 - Divide by 8
- * 1000 - Divide by 9
- * 1001 - Divide by 10
- * 1010 - Divide by 11
- * 1011 - Divide by 12
- * 1100 - Divide by 13
- * 1101 - Divide by 14
- * 1110 - Divide by 15
- * 1111 - Divide by 1
- * On power-on-reset these bits are reset to 0000b.
- */
- clk_usb_div = (((value >> 28) & 0xf) + 1);
- hw = clk_hw_register_fixed_factor(NULL, "usb_clk", "pll2", 0, 1, clk_usb_div);
- hw = clk_hw_register_gate(NULL, "ohci-platform",
- "usb_clk", 0,
- EP93XX_SYSCON_PWRCNT,
- EP93XX_SYSCON_PWRCNT_USH_EN,
- 0,
- &clk_lock);
- clk_hw_register_clkdev(hw, NULL, "ohci-platform");
-
- /*
- * EP93xx SSP clock rate was doubled in version E2. For more information
- * see:
- * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
- */
- clk_spi_div = 1;
- if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2)
- clk_spi_div = 2;
- hw = clk_hw_register_fixed_factor(NULL, "ep93xx-spi.0", "xtali", 0, 1, clk_spi_div);
- clk_hw_register_clkdev(hw, NULL, "ep93xx-spi.0");
-
- /* pwm clock */
- hw = clk_hw_register_fixed_factor(NULL, "pwm_clk", "xtali", 0, 1, 1);
- clk_hw_register_clkdev(hw, "pwm_clk", NULL);
-
- pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
- clk_pll1_rate / 1000000, clk_pll2_rate / 1000000);
- pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
- clk_f_rate / 1000000, clk_h_rate / 1000000,
- clk_p_rate / 1000000);
-
- ep93xx_uart_clock_init();
-
- /* touchscreen/adc clock */
- hw = clk_hw_register_div("ep93xx-adc",
- "xtali",
- EP93XX_SYSCON_KEYTCHCLKDIV,
- EP93XX_SYSCON_KEYTCHCLKDIV_TSEN,
- EP93XX_SYSCON_KEYTCHCLKDIV_ADIV,
- 1,
- adc_divisors,
- ARRAY_SIZE(adc_divisors));
-
- clk_hw_register_clkdev(hw, NULL, "ep93xx-adc");
-
- /* keypad clock */
- hw = clk_hw_register_div("ep93xx-keypad",
- "xtali",
- EP93XX_SYSCON_KEYTCHCLKDIV,
- EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
- EP93XX_SYSCON_KEYTCHCLKDIV_KDIV,
- 1,
- adc_divisors,
- ARRAY_SIZE(adc_divisors));
-
- clk_hw_register_clkdev(hw, NULL, "ep93xx-keypad");
-
- /* On reset PDIV and VDIV is set to zero, while PDIV zero
- * means clock disable, VDIV shouldn't be zero.
- * So i set both dividers to minimum.
- */
- /* ENA - Enable CLK divider. */
- /* PDIV - 00 - Disable clock */
- /* VDIV - at least 2 */
- /* Check and enable video clk registers */
- value = __raw_readl(EP93XX_SYSCON_VIDCLKDIV);
- value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2;
- ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_VIDCLKDIV);
-
- /* check and enable i2s clk registers */
- value = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
- value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2;
- ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_I2SCLKDIV);
-
- /* video clk */
- hw = clk_hw_register_ddiv("ep93xx-fb",
- EP93XX_SYSCON_VIDCLKDIV,
- EP93XX_SYSCON_CLKDIV_ENABLE);
-
- clk_hw_register_clkdev(hw, NULL, "ep93xx-fb");
-
- /* i2s clk */
- hw = clk_hw_register_ddiv("mclk",
- EP93XX_SYSCON_I2SCLKDIV,
- EP93XX_SYSCON_CLKDIV_ENABLE);
-
- clk_hw_register_clkdev(hw, "mclk", "ep93xx-i2s");
-
- /* i2s sclk */
-#define EP93XX_I2SCLKDIV_SDIV_SHIFT 16
-#define EP93XX_I2SCLKDIV_SDIV_WIDTH 1
- hw = clk_hw_register_div("sclk",
- "mclk",
- EP93XX_SYSCON_I2SCLKDIV,
- EP93XX_SYSCON_I2SCLKDIV_SENA,
- EP93XX_I2SCLKDIV_SDIV_SHIFT,
- EP93XX_I2SCLKDIV_SDIV_WIDTH,
- sclk_divisors,
- ARRAY_SIZE(sclk_divisors));
-
- clk_hw_register_clkdev(hw, "sclk", "ep93xx-i2s");
-
- /* i2s lrclk */
-#define EP93XX_I2SCLKDIV_LRDIV32_SHIFT 17
-#define EP93XX_I2SCLKDIV_LRDIV32_WIDTH 3
- hw = clk_hw_register_div("lrclk",
- "sclk",
- EP93XX_SYSCON_I2SCLKDIV,
- EP93XX_SYSCON_I2SCLKDIV_SENA,
- EP93XX_I2SCLKDIV_LRDIV32_SHIFT,
- EP93XX_I2SCLKDIV_LRDIV32_WIDTH,
- lrclk_divisors,
- ARRAY_SIZE(lrclk_divisors));
-
- clk_hw_register_clkdev(hw, "lrclk", "ep93xx-i2s");
-
- return 0;
-}
-postcore_initcall(ep93xx_clock_init);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
deleted file mode 100644
index 66dba9b4a6f9..000000000000
--- a/arch/arm/mach-ep93xx/core.c
+++ /dev/null
@@ -1,954 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/core.c
- * Core routines for Cirrus EP93xx chips.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@...tstofly.org>
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@....org>
- *
- * Thanks go to Michael Burian and Ray Lehtiniemi for their key
- * role in the ep93xx linux community.
- */
-
-#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/sys_soc.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/uaccess.h>
-#include <linux/termios.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/serial.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/gpio/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/export.h>
-#include <linux/irqchip/arm-vic.h>
-#include <linux/reboot.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <linux/random.h>
-#include <linux/ioport.h>
-
-#include "hardware.h"
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/keypad-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include <linux/soc/cirrus/ep93xx.h>
-
-#include "gpio-ep93xx.h"
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "soc.h"
-#include "irqs.h"
-
-/*************************************************************************
- * Static I/O mappings that are needed for all EP93xx platforms
- *************************************************************************/
-static struct map_desc ep93xx_io_desc[] __initdata = {
- {
- .virtual = EP93XX_AHB_VIRT_BASE,
- .pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE),
- .length = EP93XX_AHB_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = EP93XX_APB_VIRT_BASE,
- .pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE),
- .length = EP93XX_APB_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-void __init ep93xx_map_io(void)
-{
- iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc));
-}
-
-/*************************************************************************
- * EP93xx IRQ handling
- *************************************************************************/
-void __init ep93xx_init_irq(void)
-{
- vic_init(EP93XX_VIC1_BASE, IRQ_EP93XX_VIC0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
- vic_init(EP93XX_VIC2_BASE, IRQ_EP93XX_VIC1, EP93XX_VIC2_VALID_IRQ_MASK, 0);
-}
-
-
-/*************************************************************************
- * EP93xx System Controller Software Locked register handling
- *************************************************************************/
-
-/*
- * syscon_swlock prevents anything else from writing to the syscon
- * block while a software locked register is being written.
- */
-static DEFINE_SPINLOCK(syscon_swlock);
-
-void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&syscon_swlock, flags);
-
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(val, reg);
-
- spin_unlock_irqrestore(&syscon_swlock, flags);
-}
-
-void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
-{
- unsigned long flags;
- unsigned int val;
-
- spin_lock_irqsave(&syscon_swlock, flags);
-
- val = __raw_readl(EP93XX_SYSCON_DEVCFG);
- val &= ~clear_bits;
- val |= set_bits;
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(val, EP93XX_SYSCON_DEVCFG);
-
- spin_unlock_irqrestore(&syscon_swlock, flags);
-}
-
-/**
- * ep93xx_chip_revision() - returns the EP93xx chip revision
- *
- * See "platform.h" for more information.
- */
-unsigned int ep93xx_chip_revision(void)
-{
- unsigned int v;
-
- v = __raw_readl(EP93XX_SYSCON_SYSCFG);
- v &= EP93XX_SYSCON_SYSCFG_REV_MASK;
- v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT;
- return v;
-}
-EXPORT_SYMBOL_GPL(ep93xx_chip_revision);
-
-/*************************************************************************
- * EP93xx GPIO
- *************************************************************************/
-/* port A */
-static struct resource ep93xx_a_gpio_resources[] = {
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE, 0x04, "data"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x10, 0x04, "dir"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x90, 0x1c, "intr"),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB),
-};
-
-static struct platform_device ep93xx_a_gpio = {
- .name = "gpio-ep93xx",
- .id = 0,
- .num_resources = ARRAY_SIZE(ep93xx_a_gpio_resources),
- .resource = ep93xx_a_gpio_resources,
-};
-
-/* port B */
-static struct resource ep93xx_b_gpio_resources[] = {
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x04, 0x04, "data"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x14, 0x04, "dir"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0xac, 0x1c, "intr"),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB),
-};
-
-static struct platform_device ep93xx_b_gpio = {
- .name = "gpio-ep93xx",
- .id = 1,
- .num_resources = ARRAY_SIZE(ep93xx_b_gpio_resources),
- .resource = ep93xx_b_gpio_resources,
-};
-
-/* port C */
-static struct resource ep93xx_c_gpio_resources[] = {
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x08, 0x04, "data"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x18, 0x04, "dir"),
-};
-
-static struct platform_device ep93xx_c_gpio = {
- .name = "gpio-ep93xx",
- .id = 2,
- .num_resources = ARRAY_SIZE(ep93xx_c_gpio_resources),
- .resource = ep93xx_c_gpio_resources,
-};
-
-/* port D */
-static struct resource ep93xx_d_gpio_resources[] = {
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x0c, 0x04, "data"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x1c, 0x04, "dir"),
-};
-
-static struct platform_device ep93xx_d_gpio = {
- .name = "gpio-ep93xx",
- .id = 3,
- .num_resources = ARRAY_SIZE(ep93xx_d_gpio_resources),
- .resource = ep93xx_d_gpio_resources,
-};
-
-/* port E */
-static struct resource ep93xx_e_gpio_resources[] = {
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x20, 0x04, "data"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x24, 0x04, "dir"),
-};
-
-static struct platform_device ep93xx_e_gpio = {
- .name = "gpio-ep93xx",
- .id = 4,
- .num_resources = ARRAY_SIZE(ep93xx_e_gpio_resources),
- .resource = ep93xx_e_gpio_resources,
-};
-
-/* port F */
-static struct resource ep93xx_f_gpio_resources[] = {
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x30, 0x04, "data"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x34, 0x04, "dir"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x4c, 0x1c, "intr"),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO0MUX),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO1MUX),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO2MUX),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO3MUX),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO4MUX),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO5MUX),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO6MUX),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO7MUX),
-};
-
-static struct platform_device ep93xx_f_gpio = {
- .name = "gpio-ep93xx",
- .id = 5,
- .num_resources = ARRAY_SIZE(ep93xx_f_gpio_resources),
- .resource = ep93xx_f_gpio_resources,
-};
-
-/* port G */
-static struct resource ep93xx_g_gpio_resources[] = {
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x38, 0x04, "data"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x3c, 0x04, "dir"),
-};
-
-static struct platform_device ep93xx_g_gpio = {
- .name = "gpio-ep93xx",
- .id = 6,
- .num_resources = ARRAY_SIZE(ep93xx_g_gpio_resources),
- .resource = ep93xx_g_gpio_resources,
-};
-
-static struct platform_device *ep93xx_gpio_device[] __initdata = {
- &ep93xx_a_gpio,
- &ep93xx_b_gpio,
- &ep93xx_c_gpio,
- &ep93xx_d_gpio,
- &ep93xx_e_gpio,
- &ep93xx_f_gpio,
- &ep93xx_g_gpio,
-};
-
-/*************************************************************************
- * EP93xx peripheral handling
- *************************************************************************/
-#define EP93XX_UART_MCR_OFFSET (0x0100)
-
-static void ep93xx_uart_set_mctrl(struct amba_device *dev,
- void __iomem *base, unsigned int mctrl)
-{
- unsigned int mcr;
-
- mcr = 0;
- if (mctrl & TIOCM_RTS)
- mcr |= 2;
- if (mctrl & TIOCM_DTR)
- mcr |= 1;
-
- __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
-}
-
-static struct amba_pl010_data ep93xx_uart_data = {
- .set_mctrl = ep93xx_uart_set_mctrl,
-};
-
-static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
- { IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
-
-static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
- { IRQ_EP93XX_UART2 }, NULL);
-
-static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
- { IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
-
-static struct resource ep93xx_rtc_resource[] = {
- DEFINE_RES_MEM(EP93XX_RTC_PHYS_BASE, 0x10c),
-};
-
-static struct platform_device ep93xx_rtc_device = {
- .name = "ep93xx-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(ep93xx_rtc_resource),
- .resource = ep93xx_rtc_resource,
-};
-
-/*************************************************************************
- * EP93xx OHCI USB Host
- *************************************************************************/
-
-static struct clk *ep93xx_ohci_host_clock;
-
-static int ep93xx_ohci_power_on(struct platform_device *pdev)
-{
- if (!ep93xx_ohci_host_clock) {
- ep93xx_ohci_host_clock = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(ep93xx_ohci_host_clock))
- return PTR_ERR(ep93xx_ohci_host_clock);
- }
-
- return clk_prepare_enable(ep93xx_ohci_host_clock);
-}
-
-static void ep93xx_ohci_power_off(struct platform_device *pdev)
-{
- clk_disable(ep93xx_ohci_host_clock);
-}
-
-static struct usb_ohci_pdata ep93xx_ohci_pdata = {
- .power_on = ep93xx_ohci_power_on,
- .power_off = ep93xx_ohci_power_off,
- .power_suspend = ep93xx_ohci_power_off,
-};
-
-static struct resource ep93xx_ohci_resources[] = {
- DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000),
- DEFINE_RES_IRQ(IRQ_EP93XX_USB),
-};
-
-static u64 ep93xx_ohci_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_ohci_device = {
- .name = "ohci-platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(ep93xx_ohci_resources),
- .resource = ep93xx_ohci_resources,
- .dev = {
- .dma_mask = &ep93xx_ohci_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &ep93xx_ohci_pdata,
- },
-};
-
-/*************************************************************************
- * EP93xx physmap'ed flash
- *************************************************************************/
-static struct physmap_flash_data ep93xx_flash_data;
-
-static struct resource ep93xx_flash_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ep93xx_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &ep93xx_flash_data,
- },
- .num_resources = 1,
- .resource = &ep93xx_flash_resource,
-};
-
-/**
- * ep93xx_register_flash() - Register the external flash device.
- * @width: bank width in octets
- * @start: resource start address
- * @size: resource size
- */
-void __init ep93xx_register_flash(unsigned int width,
- resource_size_t start, resource_size_t size)
-{
- ep93xx_flash_data.width = width;
-
- ep93xx_flash_resource.start = start;
- ep93xx_flash_resource.end = start + size - 1;
-
- platform_device_register(&ep93xx_flash);
-}
-
-
-/*************************************************************************
- * EP93xx ethernet peripheral handling
- *************************************************************************/
-static struct ep93xx_eth_data ep93xx_eth_data;
-
-static struct resource ep93xx_eth_resource[] = {
- DEFINE_RES_MEM(EP93XX_ETHERNET_PHYS_BASE, 0x10000),
- DEFINE_RES_IRQ(IRQ_EP93XX_ETHERNET),
-};
-
-static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_eth_device = {
- .name = "ep93xx-eth",
- .id = -1,
- .dev = {
- .platform_data = &ep93xx_eth_data,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &ep93xx_eth_dma_mask,
- },
- .num_resources = ARRAY_SIZE(ep93xx_eth_resource),
- .resource = ep93xx_eth_resource,
-};
-
-/**
- * ep93xx_register_eth - Register the built-in ethernet platform device.
- * @data: platform specific ethernet configuration (__initdata)
- * @copy_addr: flag indicating that the MAC address should be copied
- * from the IndAd registers (as programmed by the bootloader)
- */
-void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
-{
- if (copy_addr)
- memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
-
- ep93xx_eth_data = *data;
- platform_device_register(&ep93xx_eth_device);
-}
-
-
-/*************************************************************************
- * EP93xx i2c peripheral handling
- *************************************************************************/
-
-/* All EP93xx devices use the same two GPIO pins for I2C bit-banging */
-static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
- .dev_id = "i2c-gpio.0",
- .table = {
- /* Use local offsets on gpiochip/port "G" */
- GPIO_LOOKUP_IDX("gpio-ep93xx.6", 1, NULL, 0,
- GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- GPIO_LOOKUP_IDX("gpio-ep93xx.6", 0, NULL, 1,
- GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- },
-};
-
-static struct platform_device ep93xx_i2c_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = NULL,
- },
-};
-
-/**
- * ep93xx_register_i2c - Register the i2c platform device.
- * @devices: platform specific i2c bus device information (__initdata)
- * @num: the number of devices on the i2c bus
- */
-void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
-{
- /*
- * FIXME: this just sets the two pins as non-opendrain, as no
- * platforms tries to do that anyway. Flag the applicable lines
- * as open drain in the GPIO_LOOKUP above and the driver or
- * gpiolib will handle open drain/open drain emulation as need
- * be. Right now i2c-gpio emulates open drain which is not
- * optimal.
- */
- __raw_writel((0 << 1) | (0 << 0),
- EP93XX_GPIO_EEDRIVE);
-
- i2c_register_board_info(0, devices, num);
- gpiod_add_lookup_table(&ep93xx_i2c_gpiod_table);
- platform_device_register(&ep93xx_i2c_device);
-}
-
-/*************************************************************************
- * EP93xx SPI peripheral handling
- *************************************************************************/
-static struct ep93xx_spi_info ep93xx_spi_master_data;
-
-static struct resource ep93xx_spi_resources[] = {
- DEFINE_RES_MEM(EP93XX_SPI_PHYS_BASE, 0x18),
- DEFINE_RES_IRQ(IRQ_EP93XX_SSP),
-};
-
-static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_spi_device = {
- .name = "ep93xx-spi",
- .id = 0,
- .dev = {
- .platform_data = &ep93xx_spi_master_data,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &ep93xx_spi_dma_mask,
- },
- .num_resources = ARRAY_SIZE(ep93xx_spi_resources),
- .resource = ep93xx_spi_resources,
-};
-
-/**
- * ep93xx_register_spi() - registers spi platform device
- * @info: ep93xx board specific spi master info (__initdata)
- * @devices: SPI devices to register (__initdata)
- * @num: number of SPI devices to register
- *
- * This function registers platform device for the EP93xx SPI controller and
- * also makes sure that SPI pins are muxed so that I2S is not using those pins.
- */
-void __init ep93xx_register_spi(struct ep93xx_spi_info *info,
- struct spi_board_info *devices, int num)
-{
- /*
- * When SPI is used, we need to make sure that I2S is muxed off from
- * SPI pins.
- */
- ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP);
-
- ep93xx_spi_master_data = *info;
- spi_register_board_info(devices, num);
- platform_device_register(&ep93xx_spi_device);
-}
-
-/*************************************************************************
- * EP93xx LEDs
- *************************************************************************/
-static const struct gpio_led ep93xx_led_pins[] __initconst = {
- {
- .name = "platform:grled",
- }, {
- .name = "platform:rdled",
- },
-};
-
-static const struct gpio_led_platform_data ep93xx_led_data __initconst = {
- .num_leds = ARRAY_SIZE(ep93xx_led_pins),
- .leds = ep93xx_led_pins,
-};
-
-static struct gpiod_lookup_table ep93xx_leds_gpio_table = {
- .dev_id = "leds-gpio",
- .table = {
- /* Use local offsets on gpiochip/port "E" */
- GPIO_LOOKUP_IDX("gpio-ep93xx.4", 0, NULL, 0, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("gpio-ep93xx.4", 1, NULL, 1, GPIO_ACTIVE_HIGH),
- { }
- },
-};
-
-/*************************************************************************
- * EP93xx pwm peripheral handling
- *************************************************************************/
-static struct resource ep93xx_pwm0_resource[] = {
- DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE, 0x10),
-};
-
-static struct platform_device ep93xx_pwm0_device = {
- .name = "ep93xx-pwm",
- .id = 0,
- .num_resources = ARRAY_SIZE(ep93xx_pwm0_resource),
- .resource = ep93xx_pwm0_resource,
-};
-
-static struct resource ep93xx_pwm1_resource[] = {
- DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE + 0x20, 0x10),
-};
-
-static struct platform_device ep93xx_pwm1_device = {
- .name = "ep93xx-pwm",
- .id = 1,
- .num_resources = ARRAY_SIZE(ep93xx_pwm1_resource),
- .resource = ep93xx_pwm1_resource,
-};
-
-void __init ep93xx_register_pwm(int pwm0, int pwm1)
-{
- if (pwm0)
- platform_device_register(&ep93xx_pwm0_device);
-
- /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
- if (pwm1)
- platform_device_register(&ep93xx_pwm1_device);
-}
-
-/*************************************************************************
- * EP93xx video peripheral handling
- *************************************************************************/
-static struct ep93xxfb_mach_info ep93xxfb_data;
-
-static struct resource ep93xx_fb_resource[] = {
- DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE, 0x800),
-};
-
-static struct platform_device ep93xx_fb_device = {
- .name = "ep93xx-fb",
- .id = -1,
- .dev = {
- .platform_data = &ep93xxfb_data,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &ep93xx_fb_device.dev.coherent_dma_mask,
- },
- .num_resources = ARRAY_SIZE(ep93xx_fb_resource),
- .resource = ep93xx_fb_resource,
-};
-
-/* The backlight use a single register in the framebuffer's register space */
-#define EP93XX_RASTER_REG_BRIGHTNESS 0x20
-
-static struct resource ep93xx_bl_resources[] = {
- DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE +
- EP93XX_RASTER_REG_BRIGHTNESS, 0x04),
-};
-
-static struct platform_device ep93xx_bl_device = {
- .name = "ep93xx-bl",
- .id = -1,
- .num_resources = ARRAY_SIZE(ep93xx_bl_resources),
- .resource = ep93xx_bl_resources,
-};
-
-/**
- * ep93xx_register_fb - Register the framebuffer platform device.
- * @data: platform specific framebuffer configuration (__initdata)
- */
-void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
-{
- ep93xxfb_data = *data;
- platform_device_register(&ep93xx_fb_device);
- platform_device_register(&ep93xx_bl_device);
-}
-
-
-/*************************************************************************
- * EP93xx matrix keypad peripheral handling
- *************************************************************************/
-static struct ep93xx_keypad_platform_data ep93xx_keypad_data;
-
-static struct resource ep93xx_keypad_resource[] = {
- DEFINE_RES_MEM(EP93XX_KEY_MATRIX_PHYS_BASE, 0x0c),
- DEFINE_RES_IRQ(IRQ_EP93XX_KEY),
-};
-
-static struct platform_device ep93xx_keypad_device = {
- .name = "ep93xx-keypad",
- .id = -1,
- .dev = {
- .platform_data = &ep93xx_keypad_data,
- },
- .num_resources = ARRAY_SIZE(ep93xx_keypad_resource),
- .resource = ep93xx_keypad_resource,
-};
-
-/**
- * ep93xx_register_keypad - Register the keypad platform device.
- * @data: platform specific keypad configuration (__initdata)
- */
-void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
-{
- ep93xx_keypad_data = *data;
- platform_device_register(&ep93xx_keypad_device);
-}
-
-/*************************************************************************
- * EP93xx I2S audio peripheral handling
- *************************************************************************/
-static struct resource ep93xx_i2s_resource[] = {
- DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100),
- DEFINE_RES_IRQ(IRQ_EP93XX_SAI),
-};
-
-static struct platform_device ep93xx_i2s_device = {
- .name = "ep93xx-i2s",
- .id = -1,
- .num_resources = ARRAY_SIZE(ep93xx_i2s_resource),
- .resource = ep93xx_i2s_resource,
-};
-
-static struct platform_device ep93xx_pcm_device = {
- .name = "ep93xx-pcm-audio",
- .id = -1,
-};
-
-void __init ep93xx_register_i2s(void)
-{
- platform_device_register(&ep93xx_i2s_device);
- platform_device_register(&ep93xx_pcm_device);
-}
-
-#define EP93XX_SYSCON_DEVCFG_I2S_MASK (EP93XX_SYSCON_DEVCFG_I2SONSSP | \
- EP93XX_SYSCON_DEVCFG_I2SONAC97)
-
-#define EP93XX_I2SCLKDIV_MASK (EP93XX_SYSCON_I2SCLKDIV_ORIDE | \
- EP93XX_SYSCON_I2SCLKDIV_SPOL)
-
-int ep93xx_i2s_acquire(void)
-{
- unsigned val;
-
- ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97,
- EP93XX_SYSCON_DEVCFG_I2S_MASK);
-
- /*
- * This is potentially racy with the clock api for i2s_mclk, sclk and
- * lrclk. Since the i2s driver is the only user of those clocks we
- * rely on it to prevent parallel use of this function and the
- * clock api for the i2s clocks.
- */
- val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
- val &= ~EP93XX_I2SCLKDIV_MASK;
- val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL;
- ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV);
-
- return 0;
-}
-EXPORT_SYMBOL(ep93xx_i2s_acquire);
-
-void ep93xx_i2s_release(void)
-{
- ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
-}
-EXPORT_SYMBOL(ep93xx_i2s_release);
-
-/*************************************************************************
- * EP93xx AC97 audio peripheral handling
- *************************************************************************/
-static struct resource ep93xx_ac97_resources[] = {
- DEFINE_RES_MEM(EP93XX_AAC_PHYS_BASE, 0xac),
- DEFINE_RES_IRQ(IRQ_EP93XX_AACINTR),
-};
-
-static struct platform_device ep93xx_ac97_device = {
- .name = "ep93xx-ac97",
- .id = -1,
- .num_resources = ARRAY_SIZE(ep93xx_ac97_resources),
- .resource = ep93xx_ac97_resources,
-};
-
-void __init ep93xx_register_ac97(void)
-{
- /*
- * Make sure that the AC97 pins are not used by I2S.
- */
- ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97);
-
- platform_device_register(&ep93xx_ac97_device);
- platform_device_register(&ep93xx_pcm_device);
-}
-
-/*************************************************************************
- * EP93xx Watchdog
- *************************************************************************/
-static struct resource ep93xx_wdt_resources[] = {
- DEFINE_RES_MEM(EP93XX_WATCHDOG_PHYS_BASE, 0x08),
-};
-
-static struct platform_device ep93xx_wdt_device = {
- .name = "ep93xx-wdt",
- .id = -1,
- .num_resources = ARRAY_SIZE(ep93xx_wdt_resources),
- .resource = ep93xx_wdt_resources,
-};
-
-/*************************************************************************
- * EP93xx IDE
- *************************************************************************/
-static struct resource ep93xx_ide_resources[] = {
- DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE, 0x38),
- DEFINE_RES_IRQ(IRQ_EP93XX_EXT3),
-};
-
-static struct platform_device ep93xx_ide_device = {
- .name = "ep93xx-ide",
- .id = -1,
- .dev = {
- .dma_mask = &ep93xx_ide_device.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(ep93xx_ide_resources),
- .resource = ep93xx_ide_resources,
-};
-
-void __init ep93xx_register_ide(void)
-{
- platform_device_register(&ep93xx_ide_device);
-}
-
-/*************************************************************************
- * EP93xx ADC
- *************************************************************************/
-static struct resource ep93xx_adc_resources[] = {
- DEFINE_RES_MEM(EP93XX_ADC_PHYS_BASE, 0x28),
- DEFINE_RES_IRQ(IRQ_EP93XX_TOUCH),
-};
-
-static struct platform_device ep93xx_adc_device = {
- .name = "ep93xx-adc",
- .id = -1,
- .num_resources = ARRAY_SIZE(ep93xx_adc_resources),
- .resource = ep93xx_adc_resources,
-};
-
-void __init ep93xx_register_adc(void)
-{
- /* Power up ADC, deactivate Touch Screen Controller */
- ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_TIN,
- EP93XX_SYSCON_DEVCFG_ADCPD);
-
- platform_device_register(&ep93xx_adc_device);
-}
-
-/*************************************************************************
- * EP93xx Security peripheral
- *************************************************************************/
-
-/*
- * The Maverick Key is 256 bits of micro fuses blown at the factory during
- * manufacturing to uniquely identify a part.
- *
- * See: http://arm.cirrus.com/forum/viewtopic.php?t=486&highlight=maverick+key
- */
-#define EP93XX_SECURITY_REG(x) (EP93XX_SECURITY_BASE + (x))
-#define EP93XX_SECURITY_SECFLG EP93XX_SECURITY_REG(0x2400)
-#define EP93XX_SECURITY_FUSEFLG EP93XX_SECURITY_REG(0x2410)
-#define EP93XX_SECURITY_UNIQID EP93XX_SECURITY_REG(0x2440)
-#define EP93XX_SECURITY_UNIQCHK EP93XX_SECURITY_REG(0x2450)
-#define EP93XX_SECURITY_UNIQVAL EP93XX_SECURITY_REG(0x2460)
-#define EP93XX_SECURITY_SECID1 EP93XX_SECURITY_REG(0x2500)
-#define EP93XX_SECURITY_SECID2 EP93XX_SECURITY_REG(0x2504)
-#define EP93XX_SECURITY_SECCHK1 EP93XX_SECURITY_REG(0x2520)
-#define EP93XX_SECURITY_SECCHK2 EP93XX_SECURITY_REG(0x2524)
-#define EP93XX_SECURITY_UNIQID2 EP93XX_SECURITY_REG(0x2700)
-#define EP93XX_SECURITY_UNIQID3 EP93XX_SECURITY_REG(0x2704)
-#define EP93XX_SECURITY_UNIQID4 EP93XX_SECURITY_REG(0x2708)
-#define EP93XX_SECURITY_UNIQID5 EP93XX_SECURITY_REG(0x270c)
-
-static char ep93xx_soc_id[33];
-
-static const char __init *ep93xx_get_soc_id(void)
-{
- unsigned int id, id2, id3, id4, id5;
-
- if (__raw_readl(EP93XX_SECURITY_UNIQVAL) != 1)
- return "bad Hamming code";
-
- id = __raw_readl(EP93XX_SECURITY_UNIQID);
- id2 = __raw_readl(EP93XX_SECURITY_UNIQID2);
- id3 = __raw_readl(EP93XX_SECURITY_UNIQID3);
- id4 = __raw_readl(EP93XX_SECURITY_UNIQID4);
- id5 = __raw_readl(EP93XX_SECURITY_UNIQID5);
-
- if (id != id2)
- return "invalid";
-
- /* Toss the unique ID into the entropy pool */
- add_device_randomness(&id2, 4);
- add_device_randomness(&id3, 4);
- add_device_randomness(&id4, 4);
- add_device_randomness(&id5, 4);
-
- snprintf(ep93xx_soc_id, sizeof(ep93xx_soc_id),
- "%08x%08x%08x%08x", id2, id3, id4, id5);
-
- return ep93xx_soc_id;
-}
-
-static const char __init *ep93xx_get_soc_rev(void)
-{
- int rev = ep93xx_chip_revision();
-
- switch (rev) {
- case EP93XX_CHIP_REV_D0:
- return "D0";
- case EP93XX_CHIP_REV_D1:
- return "D1";
- case EP93XX_CHIP_REV_E0:
- return "E0";
- case EP93XX_CHIP_REV_E1:
- return "E1";
- case EP93XX_CHIP_REV_E2:
- return "E2";
- default:
- return "unknown";
- }
-}
-
-static const char __init *ep93xx_get_machine_name(void)
-{
- return kasprintf(GFP_KERNEL,"%s", machine_desc->name);
-}
-
-static struct device __init *ep93xx_init_soc(void)
-{
- struct soc_device_attribute *soc_dev_attr;
- struct soc_device *soc_dev;
-
- soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
- if (!soc_dev_attr)
- return NULL;
-
- soc_dev_attr->machine = ep93xx_get_machine_name();
- soc_dev_attr->family = "Cirrus Logic EP93xx";
- soc_dev_attr->revision = ep93xx_get_soc_rev();
- soc_dev_attr->soc_id = ep93xx_get_soc_id();
-
- soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR(soc_dev)) {
- kfree(soc_dev_attr->machine);
- kfree(soc_dev_attr);
- return NULL;
- }
-
- return soc_device_to_device(soc_dev);
-}
-
-struct device __init *ep93xx_init_devices(void)
-{
- struct device *parent;
- unsigned int i;
-
- /* Disallow access to MaverickCrunch initially */
- ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
-
- /* Default all ports to GPIO */
- ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
- EP93XX_SYSCON_DEVCFG_GONK |
- EP93XX_SYSCON_DEVCFG_EONIDE |
- EP93XX_SYSCON_DEVCFG_GONIDE |
- EP93XX_SYSCON_DEVCFG_HONIDE);
-
- parent = ep93xx_init_soc();
-
- /* Get the GPIO working early, other devices need it */
- for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_device); i++)
- platform_device_register(ep93xx_gpio_device[i]);
-
- amba_device_register(&uart1_device, &iomem_resource);
- amba_device_register(&uart2_device, &iomem_resource);
- amba_device_register(&uart3_device, &iomem_resource);
-
- platform_device_register(&ep93xx_rtc_device);
- platform_device_register(&ep93xx_ohci_device);
- platform_device_register(&ep93xx_wdt_device);
-
- gpiod_add_lookup_table(&ep93xx_leds_gpio_table);
- gpio_led_register_device(-1, &ep93xx_led_data);
-
- return parent;
-}
-
-void ep93xx_restart(enum reboot_mode mode, const char *cmd)
-{
- /*
- * Set then clear the SWRST bit to initiate a software reset
- */
- ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
- ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
-
- while (1)
- ;
-}
diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c
deleted file mode 100644
index 74515acab8ef..000000000000
--- a/arch/arm/mach-ep93xx/dma.c
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/dma.c
- *
- * Platform support code for the EP93xx dmaengine driver.
- *
- * Copyright (C) 2011 Mika Westerberg
- *
- * This work is based on the original dma-m2p implementation with
- * following copyrights:
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@...tstofly.org>
- * Copyright (C) 2006 Applied Data Systems
- * Copyright (C) 2009 Ryan Mallon <rmallon@...il.com>
- */
-
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/platform_data/dma-ep93xx.h>
-#include "hardware.h"
-
-#include "soc.h"
-
-#define DMA_CHANNEL(_name, _base, _irq) \
- { .name = (_name), .base = (_base), .irq = (_irq) }
-
-/*
- * DMA M2P channels.
- *
- * On the EP93xx chip the following peripherals my be allocated to the 10
- * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive).
- *
- * I2S contains 3 Tx and 3 Rx DMA Channels
- * AAC contains 3 Tx and 3 Rx DMA Channels
- * UART1 contains 1 Tx and 1 Rx DMA Channels
- * UART2 contains 1 Tx and 1 Rx DMA Channels
- * UART3 contains 1 Tx and 1 Rx DMA Channels
- * IrDA contains 1 Tx and 1 Rx DMA Channels
- *
- * Registers are mapped statically in ep93xx_map_io().
- */
-static struct ep93xx_dma_chan_data ep93xx_dma_m2p_channels[] = {
- DMA_CHANNEL("m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0),
- DMA_CHANNEL("m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1),
- DMA_CHANNEL("m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2),
- DMA_CHANNEL("m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3),
- DMA_CHANNEL("m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4),
- DMA_CHANNEL("m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5),
- DMA_CHANNEL("m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6),
- DMA_CHANNEL("m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7),
- DMA_CHANNEL("m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8),
- DMA_CHANNEL("m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9),
-};
-
-static struct ep93xx_dma_platform_data ep93xx_dma_m2p_data = {
- .channels = ep93xx_dma_m2p_channels,
- .num_channels = ARRAY_SIZE(ep93xx_dma_m2p_channels),
-};
-
-static u64 ep93xx_dma_m2p_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_dma_m2p_device = {
- .name = "ep93xx-dma-m2p",
- .id = -1,
- .dev = {
- .platform_data = &ep93xx_dma_m2p_data,
- .dma_mask = &ep93xx_dma_m2p_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-/*
- * DMA M2M channels.
- *
- * There are 2 M2M channels which support memcpy/memset and in addition simple
- * hardware requests from/to SSP and IDE. We do not implement an external
- * hardware requests.
- *
- * Registers are mapped statically in ep93xx_map_io().
- */
-static struct ep93xx_dma_chan_data ep93xx_dma_m2m_channels[] = {
- DMA_CHANNEL("m2m0", EP93XX_DMA_BASE + 0x0100, IRQ_EP93XX_DMAM2M0),
- DMA_CHANNEL("m2m1", EP93XX_DMA_BASE + 0x0140, IRQ_EP93XX_DMAM2M1),
-};
-
-static struct ep93xx_dma_platform_data ep93xx_dma_m2m_data = {
- .channels = ep93xx_dma_m2m_channels,
- .num_channels = ARRAY_SIZE(ep93xx_dma_m2m_channels),
-};
-
-static u64 ep93xx_dma_m2m_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_dma_m2m_device = {
- .name = "ep93xx-dma-m2m",
- .id = -1,
- .dev = {
- .platform_data = &ep93xx_dma_m2m_data,
- .dma_mask = &ep93xx_dma_m2m_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static int __init ep93xx_dma_init(void)
-{
- platform_device_register(&ep93xx_dma_m2p_device);
- platform_device_register(&ep93xx_dma_m2m_device);
- return 0;
-}
-arch_initcall(ep93xx_dma_init);
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
deleted file mode 100644
index c1e880946f72..000000000000
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ /dev/null
@@ -1,344 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/edb93xx.c
- * Cirrus Logic EDB93xx Development Board support.
- *
- * EDB93XX, EDB9301, EDB9307A
- * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@...ionengravers.com>
- *
- * EDB9302
- * Copyright (C) 2006 George Kashperko <george@...s.com.ua>
- *
- * EDB9302A, EDB9315, EDB9315A
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@...tstofly.org>
- *
- * EDB9307
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@....org>
- *
- * EDB9312
- * Copyright (C) 2006 Infosys Technologies Limited
- * Toufeeq Hussain <toufeeq_hussain@...osys.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio/machine.h>
-
-#include <sound/cs4271.h>
-
-#include "hardware.h"
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static void __init edb93xx_register_flash(void)
-{
- if (machine_is_edb9307() || machine_is_edb9312() ||
- machine_is_edb9315()) {
- ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
- } else {
- ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
- }
-}
-
-static struct ep93xx_eth_data __initdata edb93xx_eth_data = {
- .phy_id = 1,
-};
-
-
-/*************************************************************************
- * EDB93xx i2c peripheral handling
- *************************************************************************/
-
-static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
- {
- I2C_BOARD_INFO("isl1208", 0x6f),
- },
-};
-
-static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
- {
- I2C_BOARD_INFO("ds1337", 0x68),
- },
-};
-
-static void __init edb93xx_register_i2c(void)
-{
- if (machine_is_edb9302a() || machine_is_edb9307a() ||
- machine_is_edb9315a()) {
- ep93xx_register_i2c(edb93xxa_i2c_board_info,
- ARRAY_SIZE(edb93xxa_i2c_board_info));
- } else if (machine_is_edb9302() || machine_is_edb9307()
- || machine_is_edb9312() || machine_is_edb9315()) {
- ep93xx_register_i2c(edb93xx_i2c_board_info,
- ARRAY_SIZE(edb93xx_i2c_board_info));
- }
-}
-
-
-/*************************************************************************
- * EDB93xx SPI peripheral handling
- *************************************************************************/
-static struct cs4271_platform_data edb93xx_cs4271_data = {
- .gpio_nreset = -EINVAL, /* filled in later */
-};
-
-static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
- {
- .modalias = "cs4271",
- .platform_data = &edb93xx_cs4271_data,
- .max_speed_hz = 6000000,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_3,
- },
-};
-
-static struct gpiod_lookup_table edb93xx_spi_cs_gpio_table = {
- .dev_id = "spi0",
- .table = {
- GPIO_LOOKUP("gpio-ep93xx.0", 6, "cs", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
- /* Intentionally left blank */
-};
-
-static void __init edb93xx_register_spi(void)
-{
- if (machine_is_edb9301() || machine_is_edb9302())
- edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
- else if (machine_is_edb9302a() || machine_is_edb9307a())
- edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
- else if (machine_is_edb9315a())
- edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
-
- gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table);
- ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
- ARRAY_SIZE(edb93xx_spi_board_info));
-}
-
-
-/*************************************************************************
- * EDB93xx I2S
- *************************************************************************/
-static struct platform_device edb93xx_audio_device = {
- .name = "edb93xx-audio",
- .id = -1,
-};
-
-static int __init edb93xx_has_audio(void)
-{
- return (machine_is_edb9301() || machine_is_edb9302() ||
- machine_is_edb9302a() || machine_is_edb9307a() ||
- machine_is_edb9315a());
-}
-
-static void __init edb93xx_register_i2s(void)
-{
- if (edb93xx_has_audio()) {
- ep93xx_register_i2s();
- platform_device_register(&edb93xx_audio_device);
- }
-}
-
-
-/*************************************************************************
- * EDB93xx pwm
- *************************************************************************/
-static void __init edb93xx_register_pwm(void)
-{
- if (machine_is_edb9301() ||
- machine_is_edb9302() || machine_is_edb9302a()) {
- /* EP9301 and EP9302 only have pwm.1 (EGPIO14) */
- ep93xx_register_pwm(0, 1);
- } else if (machine_is_edb9307() || machine_is_edb9307a()) {
- /* EP9307 only has pwm.0 (PWMOUT) */
- ep93xx_register_pwm(1, 0);
- } else {
- /* EP9312 and EP9315 have both */
- ep93xx_register_pwm(1, 1);
- }
-}
-
-
-/*************************************************************************
- * EDB93xx framebuffer
- *************************************************************************/
-static struct ep93xxfb_mach_info __initdata edb93xxfb_info = {
- .flags = 0,
-};
-
-static int __init edb93xx_has_fb(void)
-{
- /* These platforms have an ep93xx with video capability */
- return machine_is_edb9307() || machine_is_edb9307a() ||
- machine_is_edb9312() || machine_is_edb9315() ||
- machine_is_edb9315a();
-}
-
-static void __init edb93xx_register_fb(void)
-{
- if (!edb93xx_has_fb())
- return;
-
- if (machine_is_edb9307a() || machine_is_edb9315a())
- edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0;
- else
- edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3;
-
- ep93xx_register_fb(&edb93xxfb_info);
-}
-
-
-/*************************************************************************
- * EDB93xx IDE
- *************************************************************************/
-static int __init edb93xx_has_ide(void)
-{
- /*
- * Although EDB9312 and EDB9315 do have IDE capability, they have
- * INTRQ line wired as pull-up, which makes using IDE interface
- * problematic.
- */
- return machine_is_edb9312() || machine_is_edb9315() ||
- machine_is_edb9315a();
-}
-
-static void __init edb93xx_register_ide(void)
-{
- if (!edb93xx_has_ide())
- return;
-
- ep93xx_register_ide();
-}
-
-
-static void __init edb93xx_init_machine(void)
-{
- ep93xx_init_devices();
- edb93xx_register_flash();
- ep93xx_register_eth(&edb93xx_eth_data, 1);
- edb93xx_register_i2c();
- edb93xx_register_spi();
- edb93xx_register_i2s();
- edb93xx_register_pwm();
- edb93xx_register_fb();
- edb93xx_register_ide();
- ep93xx_register_adc();
-}
-
-
-#ifdef CONFIG_MACH_EDB9301
-MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
- /* Maintainer: H Hartley Sweeten <hsweeten@...ionengravers.com> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = edb93xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9302
-MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
- /* Maintainer: George Kashperko <george@...s.com.ua> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = edb93xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9302A
-MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
- /* Maintainer: Lennert Buytenhek <buytenh@...tstofly.org> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = edb93xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9307
-MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
- /* Maintainer: Herbert Valerio Riedel <hvr@....org> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = edb93xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9307A
-MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
- /* Maintainer: H Hartley Sweeten <hsweeten@...ionengravers.com> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = edb93xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9312
-MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
- /* Maintainer: Toufeeq Hussain <toufeeq_hussain@...osys.com> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = edb93xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9315
-MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
- /* Maintainer: Lennert Buytenhek <buytenh@...tstofly.org> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = edb93xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9315A
-MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
- /* Maintainer: Lennert Buytenhek <buytenh@...tstofly.org> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = edb93xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-ep93xx/ep93xx-regs.h b/arch/arm/mach-ep93xx/ep93xx-regs.h
deleted file mode 100644
index 8fa3646de0a4..000000000000
--- a/arch/arm/mach-ep93xx/ep93xx-regs.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_EP93XX_REGS_H
-#define __ASM_ARCH_EP93XX_REGS_H
-
-/*
- * EP93xx linux memory map:
- *
- * virt phys size
- * fe800000 5M per-platform mappings
- * fed00000 80800000 2M APB
- * fef00000 80000000 1M AHB
- */
-
-#define EP93XX_AHB_PHYS_BASE 0x80000000
-#define EP93XX_AHB_VIRT_BASE 0xfef00000
-#define EP93XX_AHB_SIZE 0x00100000
-
-#define EP93XX_AHB_PHYS(x) (EP93XX_AHB_PHYS_BASE + (x))
-#define EP93XX_AHB_IOMEM(x) IOMEM(EP93XX_AHB_VIRT_BASE + (x))
-
-#define EP93XX_APB_PHYS_BASE 0x80800000
-#define EP93XX_APB_VIRT_BASE 0xfed00000
-#define EP93XX_APB_SIZE 0x00200000
-
-#define EP93XX_APB_PHYS(x) (EP93XX_APB_PHYS_BASE + (x))
-#define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x))
-
-/* APB UARTs */
-#define EP93XX_UART1_PHYS_BASE EP93XX_APB_PHYS(0x000c0000)
-#define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000)
-
-#define EP93XX_UART2_PHYS_BASE EP93XX_APB_PHYS(0x000d0000)
-#define EP93XX_UART2_BASE EP93XX_APB_IOMEM(0x000d0000)
-
-#define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000)
-#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000)
-
-#endif
diff --git a/arch/arm/mach-ep93xx/gpio-ep93xx.h b/arch/arm/mach-ep93xx/gpio-ep93xx.h
deleted file mode 100644
index 7b46eb7e5507..000000000000
--- a/arch/arm/mach-ep93xx/gpio-ep93xx.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Include file for the EP93XX GPIO controller machine specifics */
-
-#ifndef __GPIO_EP93XX_H
-#define __GPIO_EP93XX_H
-
-#include "ep93xx-regs.h"
-
-#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000)
-#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
-#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
-#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8)
-
-/* GPIO port A. */
-#define EP93XX_GPIO_LINE_A(x) ((x) + 0)
-#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0)
-#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1)
-#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2)
-#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3)
-#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4)
-#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5)
-#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6)
-#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7)
-
-/* GPIO port B. */
-#define EP93XX_GPIO_LINE_B(x) ((x) + 8)
-#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0)
-#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1)
-#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2)
-#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3)
-#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4)
-#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5)
-#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6)
-#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7)
-
-/* GPIO port C. */
-#define EP93XX_GPIO_LINE_C(x) ((x) + 40)
-#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0)
-#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1)
-#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2)
-#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3)
-#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4)
-#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5)
-#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6)
-#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7)
-
-/* GPIO port D. */
-#define EP93XX_GPIO_LINE_D(x) ((x) + 24)
-#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0)
-#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1)
-#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2)
-#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3)
-#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4)
-#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5)
-#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6)
-#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7)
-
-/* GPIO port E. */
-#define EP93XX_GPIO_LINE_E(x) ((x) + 32)
-#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0)
-#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1)
-#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2)
-#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3)
-#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4)
-#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5)
-#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6)
-#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7)
-
-/* GPIO port F. */
-#define EP93XX_GPIO_LINE_F(x) ((x) + 16)
-#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0)
-#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1)
-#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2)
-#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3)
-#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4)
-#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5)
-#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6)
-#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7)
-
-/* GPIO port G. */
-#define EP93XX_GPIO_LINE_G(x) ((x) + 48)
-#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0)
-#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1)
-#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2)
-#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3)
-#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4)
-#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5)
-#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6)
-#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7)
-
-/* GPIO port H. */
-#define EP93XX_GPIO_LINE_H(x) ((x) + 56)
-#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0)
-#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1)
-#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2)
-#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3)
-#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4)
-#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5)
-#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6)
-#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for gpio line identifiers */
-#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for irq capable line identifiers */
-#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7)
-
-#endif /* __GPIO_EP93XX_H */
diff --git a/arch/arm/mach-ep93xx/hardware.h b/arch/arm/mach-ep93xx/hardware.h
deleted file mode 100644
index e7d850e04782..000000000000
--- a/arch/arm/mach-ep93xx/hardware.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/hardware.h
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "platform.h"
-
-/*
- * The EP93xx has two external crystal oscillators. To generate the
- * required high-frequency clocks, the processor uses two phase-locked-
- * loops (PLLs) to multiply the incoming external clock signal to much
- * higher frequencies that are then divided down by programmable dividers
- * to produce the needed clocks. The PLLs operate independently of one
- * another.
- */
-#define EP93XX_EXT_CLK_RATE 14745600
-#define EP93XX_EXT_RTC_RATE 32768
-
-#define EP93XX_KEYTCHCLK_DIV4 (EP93XX_EXT_CLK_RATE / 4)
-#define EP93XX_KEYTCHCLK_DIV16 (EP93XX_EXT_CLK_RATE / 16)
-
-#endif
diff --git a/arch/arm/mach-ep93xx/irqs.h b/arch/arm/mach-ep93xx/irqs.h
deleted file mode 100644
index 353201b90c66..000000000000
--- a/arch/arm/mach-ep93xx/irqs.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define IRQ_EP93XX_VIC0 1
-
-#define IRQ_EP93XX_COMMRX (IRQ_EP93XX_VIC0 + 2)
-#define IRQ_EP93XX_COMMTX (IRQ_EP93XX_VIC0 + 3)
-#define IRQ_EP93XX_TIMER1 (IRQ_EP93XX_VIC0 + 4)
-#define IRQ_EP93XX_TIMER2 (IRQ_EP93XX_VIC0 + 5)
-#define IRQ_EP93XX_AACINTR (IRQ_EP93XX_VIC0 + 6)
-#define IRQ_EP93XX_DMAM2P0 (IRQ_EP93XX_VIC0 + 7)
-#define IRQ_EP93XX_DMAM2P1 (IRQ_EP93XX_VIC0 + 8)
-#define IRQ_EP93XX_DMAM2P2 (IRQ_EP93XX_VIC0 + 9)
-#define IRQ_EP93XX_DMAM2P3 (IRQ_EP93XX_VIC0 + 10)
-#define IRQ_EP93XX_DMAM2P4 (IRQ_EP93XX_VIC0 + 11)
-#define IRQ_EP93XX_DMAM2P5 (IRQ_EP93XX_VIC0 + 12)
-#define IRQ_EP93XX_DMAM2P6 (IRQ_EP93XX_VIC0 + 13)
-#define IRQ_EP93XX_DMAM2P7 (IRQ_EP93XX_VIC0 + 14)
-#define IRQ_EP93XX_DMAM2P8 (IRQ_EP93XX_VIC0 + 15)
-#define IRQ_EP93XX_DMAM2P9 (IRQ_EP93XX_VIC0 + 16)
-#define IRQ_EP93XX_DMAM2M0 (IRQ_EP93XX_VIC0 + 17)
-#define IRQ_EP93XX_DMAM2M1 (IRQ_EP93XX_VIC0 + 18)
-#define IRQ_EP93XX_GPIO0MUX (IRQ_EP93XX_VIC0 + 19)
-#define IRQ_EP93XX_GPIO1MUX (IRQ_EP93XX_VIC0 + 20)
-#define IRQ_EP93XX_GPIO2MUX (IRQ_EP93XX_VIC0 + 21)
-#define IRQ_EP93XX_GPIO3MUX (IRQ_EP93XX_VIC0 + 22)
-#define IRQ_EP93XX_UART1RX (IRQ_EP93XX_VIC0 + 23)
-#define IRQ_EP93XX_UART1TX (IRQ_EP93XX_VIC0 + 24)
-#define IRQ_EP93XX_UART2RX (IRQ_EP93XX_VIC0 + 25)
-#define IRQ_EP93XX_UART2TX (IRQ_EP93XX_VIC0 + 26)
-#define IRQ_EP93XX_UART3RX (IRQ_EP93XX_VIC0 + 27)
-#define IRQ_EP93XX_UART3TX (IRQ_EP93XX_VIC0 + 28)
-#define IRQ_EP93XX_KEY (IRQ_EP93XX_VIC0 + 29)
-#define IRQ_EP93XX_TOUCH (IRQ_EP93XX_VIC0 + 30)
-#define EP93XX_VIC1_VALID_IRQ_MASK 0x7ffffffc
-
-#define IRQ_EP93XX_VIC1 (IRQ_EP93XX_VIC0 + 32)
-
-#define IRQ_EP93XX_EXT0 (IRQ_EP93XX_VIC1 + 0)
-#define IRQ_EP93XX_EXT1 (IRQ_EP93XX_VIC1 + 1)
-#define IRQ_EP93XX_EXT2 (IRQ_EP93XX_VIC1 + 2)
-#define IRQ_EP93XX_64HZ (IRQ_EP93XX_VIC1 + 3)
-#define IRQ_EP93XX_WATCHDOG (IRQ_EP93XX_VIC1 + 4)
-#define IRQ_EP93XX_RTC (IRQ_EP93XX_VIC1 + 5)
-#define IRQ_EP93XX_IRDA (IRQ_EP93XX_VIC1 + 6)
-#define IRQ_EP93XX_ETHERNET (IRQ_EP93XX_VIC1 + 7)
-#define IRQ_EP93XX_EXT3 (IRQ_EP93XX_VIC1 + 8)
-#define IRQ_EP93XX_PROG (IRQ_EP93XX_VIC1 + 9)
-#define IRQ_EP93XX_1HZ (IRQ_EP93XX_VIC1 + 10)
-#define IRQ_EP93XX_VSYNC (IRQ_EP93XX_VIC1 + 11)
-#define IRQ_EP93XX_VIDEO_FIFO (IRQ_EP93XX_VIC1 + 12)
-#define IRQ_EP93XX_SSP1RX (IRQ_EP93XX_VIC1 + 13)
-#define IRQ_EP93XX_SSP1TX (IRQ_EP93XX_VIC1 + 14)
-#define IRQ_EP93XX_GPIO4MUX (IRQ_EP93XX_VIC1 + 15)
-#define IRQ_EP93XX_GPIO5MUX (IRQ_EP93XX_VIC1 + 16)
-#define IRQ_EP93XX_GPIO6MUX (IRQ_EP93XX_VIC1 + 17)
-#define IRQ_EP93XX_GPIO7MUX (IRQ_EP93XX_VIC1 + 18)
-#define IRQ_EP93XX_TIMER3 (IRQ_EP93XX_VIC1 + 19)
-#define IRQ_EP93XX_UART1 (IRQ_EP93XX_VIC1 + 20)
-#define IRQ_EP93XX_SSP (IRQ_EP93XX_VIC1 + 21)
-#define IRQ_EP93XX_UART2 (IRQ_EP93XX_VIC1 + 22)
-#define IRQ_EP93XX_UART3 (IRQ_EP93XX_VIC1 + 23)
-#define IRQ_EP93XX_USB (IRQ_EP93XX_VIC1 + 24)
-#define IRQ_EP93XX_ETHERNET_PME (IRQ_EP93XX_VIC1 + 25)
-#define IRQ_EP93XX_DSP (IRQ_EP93XX_VIC1 + 26)
-#define IRQ_EP93XX_GPIO_AB (IRQ_EP93XX_VIC1 + 27)
-#define IRQ_EP93XX_SAI (IRQ_EP93XX_VIC1 + 28)
-#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff
-
-#define NR_EP93XX_IRQS (IRQ_EP93XX_VIC1 + 32 + 24)
-
-#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x))
-#define EP93XX_BOARD_IRQS 32
-
-#endif
diff --git a/arch/arm/mach-ep93xx/platform.h b/arch/arm/mach-ep93xx/platform.h
deleted file mode 100644
index 5fb1b919133f..000000000000
--- a/arch/arm/mach-ep93xx/platform.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/platform.h
- */
-
-#ifndef __ASSEMBLY__
-
-#include <linux/platform_data/eth-ep93xx.h>
-#include <linux/reboot.h>
-
-struct device;
-struct i2c_board_info;
-struct spi_board_info;
-struct platform_device;
-struct ep93xxfb_mach_info;
-struct ep93xx_keypad_platform_data;
-struct ep93xx_spi_info;
-
-void ep93xx_map_io(void);
-void ep93xx_init_irq(void);
-
-void ep93xx_register_flash(unsigned int width,
- resource_size_t start, resource_size_t size);
-
-void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
-void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
-void ep93xx_register_spi(struct ep93xx_spi_info *info,
- struct spi_board_info *devices, int num);
-void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
-void ep93xx_register_pwm(int pwm0, int pwm1);
-void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
-void ep93xx_register_i2s(void);
-void ep93xx_register_ac97(void);
-void ep93xx_register_ide(void);
-void ep93xx_register_adc(void);
-
-struct device *ep93xx_init_devices(void);
-extern void ep93xx_timer_init(void);
-
-void ep93xx_restart(enum reboot_mode, const char *);
-
-#endif
diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h
deleted file mode 100644
index 3245ebbd5069..000000000000
--- a/arch/arm/mach-ep93xx/soc.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-ep93xx/soc.h
- *
- * Copyright (C) 2012 Open Kernel Labs <www.ok-labs.com>
- * Copyright (C) 2012 Ryan Mallon <rmallon@...il.com>
- */
-
-#ifndef _EP93XX_SOC_H
-#define _EP93XX_SOC_H
-
-#include "ep93xx-regs.h"
-#include "irqs.h"
-
-/*
- * EP93xx Physical Memory Map:
- *
- * The ASDO pin is sampled at system reset to select a synchronous or
- * asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up)
- * the synchronous boot mode is selected. When ASDO is "0" (i.e
- * pulled-down) the asynchronous boot mode is selected.
- *
- * In synchronous boot mode nSDCE3 is decoded starting at physical address
- * 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous
- * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3
- * decoded at 0xf0000000.
- *
- * There is known errata for the EP93xx dealing with External Memory
- * Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design
- * Guidelines" for more information. This document can be found at:
- *
- * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
- */
-
-#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */
-#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */
-#define EP93XX_CS1_PHYS_BASE 0x10000000
-#define EP93XX_CS2_PHYS_BASE 0x20000000
-#define EP93XX_CS3_PHYS_BASE 0x30000000
-#define EP93XX_PCMCIA_PHYS_BASE 0x40000000
-#define EP93XX_CS6_PHYS_BASE 0x60000000
-#define EP93XX_CS7_PHYS_BASE 0x70000000
-#define EP93XX_SDCE0_PHYS_BASE 0xc0000000
-#define EP93XX_SDCE1_PHYS_BASE 0xd0000000
-#define EP93XX_SDCE2_PHYS_BASE 0xe0000000
-#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */
-#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */
-
-/* AHB peripherals */
-#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000)
-
-#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000)
-#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000)
-
-#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000)
-#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000)
-
-#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000)
-#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000)
-
-#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000)
-
-#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000)
-
-#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000)
-
-#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000)
-
-#define EP93XX_IDE_PHYS_BASE EP93XX_AHB_PHYS(0x000a0000)
-#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000)
-
-#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000)
-
-#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000)
-
-/* APB peripherals */
-#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000)
-
-#define EP93XX_I2S_PHYS_BASE EP93XX_APB_PHYS(0x00020000)
-#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
-
-#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000)
-
-#define EP93XX_AAC_PHYS_BASE EP93XX_APB_PHYS(0x00080000)
-#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000)
-
-#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000)
-#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000)
-
-#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000)
-
-#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000)
-#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000)
-
-#define EP93XX_ADC_PHYS_BASE EP93XX_APB_PHYS(0x00100000)
-#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000)
-#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000)
-
-#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000)
-#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000)
-
-#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000)
-#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000)
-
-#define EP93XX_WATCHDOG_PHYS_BASE EP93XX_APB_PHYS(0x00140000)
-#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000)
-
-/* System controller */
-#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000)
-#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
-#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
-#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04)
-#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31)
-#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29)
-#define EP93XX_SYSCON_PWRCNT_USH_EN 28
-#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 27
-#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 26
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 25
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 24
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 23
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 22
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 21
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 20
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 19
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 18
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 17
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 16
-#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
-#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
-#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20)
-#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23)
-#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24)
-#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19)
-#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18)
-#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31)
-#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30)
-#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29)
-#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28)
-#define EP93XX_SYSCON_DEVCFG_GONK (1<<27)
-#define EP93XX_SYSCON_DEVCFG_TONG (1<<26)
-#define EP93XX_SYSCON_DEVCFG_MONG (1<<25)
-#define EP93XX_SYSCON_DEVCFG_U3EN 24
-#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23)
-#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22)
-#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21)
-#define EP93XX_SYSCON_DEVCFG_U2EN 20
-#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19)
-#define EP93XX_SYSCON_DEVCFG_U1EN 18
-#define EP93XX_SYSCON_DEVCFG_TIN (1<<17)
-#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15)
-#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14)
-#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13)
-#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12)
-#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11)
-#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10)
-#define EP93XX_SYSCON_DEVCFG_PONG (1<<9)
-#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8)
-#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7)
-#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6)
-#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4)
-#define EP93XX_SYSCON_DEVCFG_RAS (1<<3)
-#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2)
-#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1)
-#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0)
-#define EP93XX_SYSCON_VIDCLKDIV EP93XX_SYSCON_REG(0x84)
-#define EP93XX_SYSCON_CLKDIV_ENABLE 15
-#define EP93XX_SYSCON_CLKDIV_ESEL (1<<14)
-#define EP93XX_SYSCON_CLKDIV_PSEL (1<<13)
-#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8
-#define EP93XX_SYSCON_I2SCLKDIV EP93XX_SYSCON_REG(0x8c)
-#define EP93XX_SYSCON_I2SCLKDIV_SENA 31
-#define EP93XX_SYSCON_I2SCLKDIV_ORIDE (1<<29)
-#define EP93XX_SYSCON_I2SCLKDIV_SPOL (1<<19)
-#define EP93XX_I2SCLKDIV_SDIV (1 << 16)
-#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17)
-#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90)
-#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN 31
-#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV 16
-#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN 15
-#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0)
-#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c)
-#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000)
-#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28)
-#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8)
-#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7)
-#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6)
-#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5)
-#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4)
-#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3)
-#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1)
-#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0)
-#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
-
-/* EP93xx System Controller software locked register write */
-void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
-void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
-
-static inline void ep93xx_devcfg_set_bits(unsigned int bits)
-{
- ep93xx_devcfg_set_clear(bits, 0x00);
-}
-
-static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
-{
- ep93xx_devcfg_set_clear(0x00, bits);
-}
-
-#endif /* _EP93XX_SOC_H */
diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c
deleted file mode 100644
index a9efa7bc2fa1..000000000000
--- a/arch/arm/mach-ep93xx/timer-ep93xx.c
+++ /dev/null
@@ -1,143 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/sched_clock.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/mach/time.h>
-#include "soc.h"
-#include "platform.h"
-
-/*************************************************************************
- * Timer handling for EP93xx
- *************************************************************************
- * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and
- * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
- * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz,
- * is free-running, and can't generate interrupts.
- *
- * The 508 kHz timers are ideal for use for the timer interrupt, as the
- * most common values of HZ divide 508 kHz nicely. We pick the 32 bit
- * timer (timer 3) to get as long sleep intervals as possible when using
- * CONFIG_NO_HZ.
- *
- * The higher clock rate of timer 4 makes it a better choice than the
- * other timers for use as clock source and for sched_clock(), providing
- * a stable 40 bit time base.
- *************************************************************************
- */
-#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
-#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
-#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
-#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
-#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7)
-#define EP93XX_TIMER123_CONTROL_MODE (1 << 6)
-#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3)
-#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
-#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
-#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
-#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
-#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
-#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
-#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
-#define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8)
-#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
-#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
-#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
-#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
-
-#define EP93XX_TIMER123_RATE 508469
-#define EP93XX_TIMER4_RATE 983040
-
-static u64 notrace ep93xx_read_sched_clock(void)
-{
- u64 ret;
-
- ret = readl(EP93XX_TIMER4_VALUE_LOW);
- ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32);
- return ret;
-}
-
-static u64 ep93xx_clocksource_read(struct clocksource *c)
-{
- u64 ret;
-
- ret = readl(EP93XX_TIMER4_VALUE_LOW);
- ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32);
- return (u64) ret;
-}
-
-static int ep93xx_clkevt_set_next_event(unsigned long next,
- struct clock_event_device *evt)
-{
- /* Default mode: periodic, off, 508 kHz */
- u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
- EP93XX_TIMER123_CONTROL_CLKSEL;
-
- /* Clear timer */
- writel(tmode, EP93XX_TIMER3_CONTROL);
-
- /* Set next event */
- writel(next, EP93XX_TIMER3_LOAD);
- writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
- EP93XX_TIMER3_CONTROL);
- return 0;
-}
-
-
-static int ep93xx_clkevt_shutdown(struct clock_event_device *evt)
-{
- /* Disable timer */
- writel(0, EP93XX_TIMER3_CONTROL);
-
- return 0;
-}
-
-static struct clock_event_device ep93xx_clockevent = {
- .name = "timer1",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .set_state_shutdown = ep93xx_clkevt_shutdown,
- .set_state_oneshot = ep93xx_clkevt_shutdown,
- .tick_resume = ep93xx_clkevt_shutdown,
- .set_next_event = ep93xx_clkevt_set_next_event,
- .rating = 300,
-};
-
-static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
-
- /* Writing any value clears the timer interrupt */
- writel(1, EP93XX_TIMER3_CLEAR);
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-void __init ep93xx_timer_init(void)
-{
- int irq = IRQ_EP93XX_TIMER3;
- unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL;
-
- /* Enable and register clocksource and sched_clock on timer 4 */
- writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
- EP93XX_TIMER4_VALUE_HIGH);
- clocksource_mmio_init(NULL, "timer4",
- EP93XX_TIMER4_RATE, 200, 40,
- ep93xx_clocksource_read);
- sched_clock_register(ep93xx_read_sched_clock, 40,
- EP93XX_TIMER4_RATE);
-
- /* Set up clockevent on timer 3 */
- if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer",
- &ep93xx_clockevent))
- pr_err("Failed to request irq %d (ep93xx timer)\n", irq);
- clockevents_config_and_register(&ep93xx_clockevent,
- EP93XX_TIMER123_RATE,
- 1,
- 0xffffffffU);
-}
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
deleted file mode 100644
index 0bbdf587c685..000000000000
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ /dev/null
@@ -1,422 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/ts72xx.c
- * Technologic Systems TS72xx SBC support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@...tstofly.org>
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mtd/platnand.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include <linux/gpio/machine.h>
-
-#include "gpio-ep93xx.h"
-#include "hardware.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-#include "ts72xx.h"
-
-/*************************************************************************
- * IO map
- *************************************************************************/
-static struct map_desc ts72xx_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)TS72XX_MODEL_VIRT_BASE,
- .pfn = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE),
- .length = TS72XX_MODEL_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)TS72XX_OPTIONS_VIRT_BASE,
- .pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE),
- .length = TS72XX_OPTIONS_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)TS72XX_OPTIONS2_VIRT_BASE,
- .pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE),
- .length = TS72XX_OPTIONS2_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)TS72XX_CPLDVER_VIRT_BASE,
- .pfn = __phys_to_pfn(TS72XX_CPLDVER_PHYS_BASE),
- .length = TS72XX_CPLDVER_SIZE,
- .type = MT_DEVICE,
- }
-};
-
-static void __init ts72xx_map_io(void)
-{
- ep93xx_map_io();
- iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc));
-}
-
-
-/*************************************************************************
- * NAND flash
- *************************************************************************/
-#define TS72XX_NAND_CONTROL_ADDR_LINE 22 /* 0xN0400000 */
-#define TS72XX_NAND_BUSY_ADDR_LINE 23 /* 0xN0800000 */
-
-static void ts72xx_nand_hwcontrol(struct nand_chip *chip,
- int cmd, unsigned int ctrl)
-{
- if (ctrl & NAND_CTRL_CHANGE) {
- void __iomem *addr = chip->legacy.IO_ADDR_R;
- unsigned char bits;
-
- addr += (1 << TS72XX_NAND_CONTROL_ADDR_LINE);
-
- bits = __raw_readb(addr) & ~0x07;
- bits |= (ctrl & NAND_NCE) << 2; /* bit 0 -> bit 2 */
- bits |= (ctrl & NAND_CLE); /* bit 1 -> bit 1 */
- bits |= (ctrl & NAND_ALE) >> 2; /* bit 2 -> bit 0 */
-
- __raw_writeb(bits, addr);
- }
-
- if (cmd != NAND_CMD_NONE)
- __raw_writeb(cmd, chip->legacy.IO_ADDR_W);
-}
-
-static int ts72xx_nand_device_ready(struct nand_chip *chip)
-{
- void __iomem *addr = chip->legacy.IO_ADDR_R;
-
- addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE);
-
- return !!(__raw_readb(addr) & 0x20);
-}
-
-#define TS72XX_BOOTROM_PART_SIZE (SZ_16K)
-#define TS72XX_REDBOOT_PART_SIZE (SZ_2M + SZ_1M)
-
-static struct mtd_partition ts72xx_nand_parts[] = {
- {
- .name = "TS-BOOTROM",
- .offset = 0,
- .size = TS72XX_BOOTROM_PART_SIZE,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }, {
- .name = "Linux",
- .offset = MTDPART_OFS_RETAIN,
- .size = TS72XX_REDBOOT_PART_SIZE,
- /* leave so much for last partition */
- }, {
- .name = "RedBoot",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
-};
-
-static struct platform_nand_data ts72xx_nand_data = {
- .chip = {
- .nr_chips = 1,
- .chip_offset = 0,
- .chip_delay = 15,
- },
- .ctrl = {
- .cmd_ctrl = ts72xx_nand_hwcontrol,
- .dev_ready = ts72xx_nand_device_ready,
- },
-};
-
-static struct resource ts72xx_nand_resource[] = {
- {
- .start = 0, /* filled in later */
- .end = 0, /* filled in later */
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device ts72xx_nand_flash = {
- .name = "gen_nand",
- .id = -1,
- .dev.platform_data = &ts72xx_nand_data,
- .resource = ts72xx_nand_resource,
- .num_resources = ARRAY_SIZE(ts72xx_nand_resource),
-};
-
-static void __init ts72xx_register_flash(struct mtd_partition *parts, int n,
- resource_size_t start)
-{
- /*
- * TS7200 has NOR flash all other TS72xx board have NAND flash.
- */
- if (board_is_ts7200()) {
- ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
- } else {
- ts72xx_nand_resource[0].start = start;
- ts72xx_nand_resource[0].end = start + SZ_16M - 1;
-
- ts72xx_nand_data.chip.partitions = parts;
- ts72xx_nand_data.chip.nr_partitions = n;
-
- platform_device_register(&ts72xx_nand_flash);
- }
-}
-
-/*************************************************************************
- * RTC M48T86
- *************************************************************************/
-#define TS72XX_RTC_INDEX_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x00800000)
-#define TS72XX_RTC_DATA_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x01700000)
-
-static struct resource ts72xx_rtc_resources[] = {
- DEFINE_RES_MEM(TS72XX_RTC_INDEX_PHYS_BASE, 0x01),
- DEFINE_RES_MEM(TS72XX_RTC_DATA_PHYS_BASE, 0x01),
-};
-
-static struct platform_device ts72xx_rtc_device = {
- .name = "rtc-m48t86",
- .id = -1,
- .resource = ts72xx_rtc_resources,
- .num_resources = ARRAY_SIZE(ts72xx_rtc_resources),
-};
-
-/*************************************************************************
- * Watchdog (in CPLD)
- *************************************************************************/
-#define TS72XX_WDT_CONTROL_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03800000)
-#define TS72XX_WDT_FEED_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03c00000)
-
-static struct resource ts72xx_wdt_resources[] = {
- DEFINE_RES_MEM(TS72XX_WDT_CONTROL_PHYS_BASE, 0x01),
- DEFINE_RES_MEM(TS72XX_WDT_FEED_PHYS_BASE, 0x01),
-};
-
-static struct platform_device ts72xx_wdt_device = {
- .name = "ts72xx-wdt",
- .id = -1,
- .resource = ts72xx_wdt_resources,
- .num_resources = ARRAY_SIZE(ts72xx_wdt_resources),
-};
-
-/*************************************************************************
- * ETH
- *************************************************************************/
-static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
- .phy_id = 1,
-};
-
-/*************************************************************************
- * SPI SD/MMC host
- *************************************************************************/
-#define BK3_EN_SDCARD_PHYS_BASE 0x12400000
-#define BK3_EN_SDCARD_PWR 0x0
-#define BK3_DIS_SDCARD_PWR 0x0C
-static void bk3_mmc_spi_setpower(struct device *dev, unsigned int vdd)
-{
- void __iomem *pwr_sd = ioremap(BK3_EN_SDCARD_PHYS_BASE, SZ_4K);
-
- if (!pwr_sd) {
- pr_err("Failed to enable SD card power!");
- return;
- }
-
- pr_debug("%s: SD card pwr %s VDD:0x%x\n", __func__,
- !!vdd ? "ON" : "OFF", vdd);
-
- if (!!vdd)
- __raw_writeb(BK3_EN_SDCARD_PWR, pwr_sd);
- else
- __raw_writeb(BK3_DIS_SDCARD_PWR, pwr_sd);
-
- iounmap(pwr_sd);
-}
-
-static struct mmc_spi_platform_data bk3_spi_mmc_data = {
- .detect_delay = 500,
- .powerup_msecs = 100,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .caps = MMC_CAP_NONREMOVABLE,
- .setpower = bk3_mmc_spi_setpower,
-};
-
-/*************************************************************************
- * SPI Bus - SD card access
- *************************************************************************/
-static struct spi_board_info bk3_spi_board_info[] __initdata = {
- {
- .modalias = "mmc_spi",
- .platform_data = &bk3_spi_mmc_data,
- .max_speed_hz = 7.4E6,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_0,
- },
-};
-
-/*
- * This is a stub -> the FGPIO[3] pin is not connected on the schematic
- * The all work is performed automatically by !SPI_FRAME (SFRM1) and
- * goes through CPLD
- */
-static struct gpiod_lookup_table bk3_spi_cs_gpio_table = {
- .dev_id = "spi0",
- .table = {
- GPIO_LOOKUP("gpio-ep93xx.5", 3, "cs", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct ep93xx_spi_info bk3_spi_master __initdata = {
- .use_dma = 1,
-};
-
-/*************************************************************************
- * TS72XX support code
- *************************************************************************/
-#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX)
-
-/* Relative to EP93XX_CS1_PHYS_BASE */
-#define TS73XX_FPGA_LOADER_BASE 0x03c00000
-
-static struct resource ts73xx_fpga_resources[] = {
- {
- .start = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE,
- .end = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE + 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device ts73xx_fpga_device = {
- .name = "ts73xx-fpga-mgr",
- .id = -1,
- .resource = ts73xx_fpga_resources,
- .num_resources = ARRAY_SIZE(ts73xx_fpga_resources),
-};
-
-#endif
-
-/*************************************************************************
- * SPI Bus
- *************************************************************************/
-static struct spi_board_info ts72xx_spi_devices[] __initdata = {
- {
- .modalias = "tmp122",
- .max_speed_hz = 2 * 1000 * 1000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = {
- .dev_id = "spi0",
- .table = {
- /* DIO_17 */
- GPIO_LOOKUP("gpio-ep93xx.5", 2, "cs", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct ep93xx_spi_info ts72xx_spi_info __initdata = {
- /* Intentionally left blank */
-};
-
-static void __init ts72xx_init_machine(void)
-{
- ep93xx_init_devices();
- ts72xx_register_flash(ts72xx_nand_parts, ARRAY_SIZE(ts72xx_nand_parts),
- is_ts9420_installed() ?
- EP93XX_CS7_PHYS_BASE : EP93XX_CS6_PHYS_BASE);
- platform_device_register(&ts72xx_rtc_device);
- platform_device_register(&ts72xx_wdt_device);
-
- ep93xx_register_eth(&ts72xx_eth_data, 1);
-#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX)
- if (board_is_ts7300())
- platform_device_register(&ts73xx_fpga_device);
-#endif
- gpiod_add_lookup_table(&ts72xx_spi_cs_gpio_table);
- ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices,
- ARRAY_SIZE(ts72xx_spi_devices));
-}
-
-MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
- /* Maintainer: Lennert Buytenhek <buytenh@...tstofly.org> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ts72xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = ts72xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-
-/*************************************************************************
- * EP93xx I2S audio peripheral handling
- *************************************************************************/
-static struct resource ep93xx_i2s_resource[] = {
- DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100),
- DEFINE_RES_IRQ_NAMED(IRQ_EP93XX_SAI, "spilink i2s slave"),
-};
-
-static struct platform_device ep93xx_i2s_device = {
- .name = "ep93xx-spilink-i2s",
- .id = -1,
- .num_resources = ARRAY_SIZE(ep93xx_i2s_resource),
- .resource = ep93xx_i2s_resource,
-};
-
-/*************************************************************************
- * BK3 support code
- *************************************************************************/
-static struct mtd_partition bk3_nand_parts[] = {
- {
- .name = "System",
- .offset = 0x00000000,
- .size = 0x01e00000,
- }, {
- .name = "Data",
- .offset = 0x01e00000,
- .size = 0x05f20000
- }, {
- .name = "RedBoot",
- .offset = 0x07d20000,
- .size = 0x002e0000,
- .mask_flags = MTD_WRITEABLE, /* force RO */
- },
-};
-
-static void __init bk3_init_machine(void)
-{
- ep93xx_init_devices();
-
- ts72xx_register_flash(bk3_nand_parts, ARRAY_SIZE(bk3_nand_parts),
- EP93XX_CS6_PHYS_BASE);
-
- ep93xx_register_eth(&ts72xx_eth_data, 1);
-
- gpiod_add_lookup_table(&bk3_spi_cs_gpio_table);
- ep93xx_register_spi(&bk3_spi_master, bk3_spi_board_info,
- ARRAY_SIZE(bk3_spi_board_info));
-
- /* Configure ep93xx's I2S to use AC97 pins */
- ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97);
- platform_device_register(&ep93xx_i2s_device);
-}
-
-MACHINE_START(BK3, "Liebherr controller BK3.1")
- /* Maintainer: Lukasz Majewski <lukma@...x.de> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ts72xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = bk3_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/ts72xx.h b/arch/arm/mach-ep93xx/ts72xx.h
deleted file mode 100644
index 00b4941d29c9..000000000000
--- a/arch/arm/mach-ep93xx/ts72xx.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/ts72xx.h
- */
-
-/*
- * TS72xx memory map:
- *
- * virt phys size
- * febff000 22000000 4K model number register (bits 0-2)
- * febfe000 22400000 4K options register
- * febfd000 22800000 4K options register #2
- * febfc000 23400000 4K CPLD version register
- */
-
-#ifndef __TS72XX_H_
-#define __TS72XX_H_
-
-#define TS72XX_MODEL_PHYS_BASE 0x22000000
-#define TS72XX_MODEL_VIRT_BASE IOMEM(0xfebff000)
-#define TS72XX_MODEL_SIZE 0x00001000
-
-#define TS72XX_MODEL_TS7200 0x00
-#define TS72XX_MODEL_TS7250 0x01
-#define TS72XX_MODEL_TS7260 0x02
-#define TS72XX_MODEL_TS7300 0x03
-#define TS72XX_MODEL_TS7400 0x04
-#define TS72XX_MODEL_MASK 0x07
-
-
-#define TS72XX_OPTIONS_PHYS_BASE 0x22400000
-#define TS72XX_OPTIONS_VIRT_BASE IOMEM(0xfebfe000)
-#define TS72XX_OPTIONS_SIZE 0x00001000
-
-#define TS72XX_OPTIONS_COM2_RS485 0x02
-#define TS72XX_OPTIONS_MAX197 0x01
-
-
-#define TS72XX_OPTIONS2_PHYS_BASE 0x22800000
-#define TS72XX_OPTIONS2_VIRT_BASE IOMEM(0xfebfd000)
-#define TS72XX_OPTIONS2_SIZE 0x00001000
-
-#define TS72XX_OPTIONS2_TS9420 0x04
-#define TS72XX_OPTIONS2_TS9420_BOOT 0x02
-
-#define TS72XX_CPLDVER_PHYS_BASE 0x23400000
-#define TS72XX_CPLDVER_VIRT_BASE IOMEM(0xfebfc000)
-#define TS72XX_CPLDVER_SIZE 0x00001000
-
-#ifndef __ASSEMBLY__
-
-static inline int ts72xx_model(void)
-{
- return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK;
-}
-
-static inline int board_is_ts7200(void)
-{
- return ts72xx_model() == TS72XX_MODEL_TS7200;
-}
-
-static inline int board_is_ts7250(void)
-{
- return ts72xx_model() == TS72XX_MODEL_TS7250;
-}
-
-static inline int board_is_ts7260(void)
-{
- return ts72xx_model() == TS72XX_MODEL_TS7260;
-}
-
-static inline int board_is_ts7300(void)
-{
- return ts72xx_model() == TS72XX_MODEL_TS7300;
-}
-
-static inline int board_is_ts7400(void)
-{
- return ts72xx_model() == TS72XX_MODEL_TS7400;
-}
-
-static inline int is_max197_installed(void)
-{
- return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
- TS72XX_OPTIONS_MAX197);
-}
-
-static inline int is_ts9420_installed(void)
-{
- return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
- TS72XX_OPTIONS2_TS9420);
-}
-#endif
-#endif /* __TS72XX_H_ */
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
deleted file mode 100644
index 020223b0be2b..000000000000
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ /dev/null
@@ -1,311 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/vision_ep9307.c
- * Vision Engraving Systems EP9307 SoM support.
- *
- * Copyright (C) 2008-2011 Vision Engraving Systems
- * H Hartley Sweeten <hsweeten@...ionengravers.com>
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/fb.h>
-#include <linux/io.h>
-#include <linux/mtd/partitions.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/mmc/host.h>
-
-#include <sound/cs4271.h>
-
-#include "hardware.h"
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-/*************************************************************************
- * Static I/O mappings for the FPGA
- *************************************************************************/
-#define VISION_PHYS_BASE EP93XX_CS7_PHYS_BASE
-#define VISION_VIRT_BASE 0xfebff000
-
-static struct map_desc vision_io_desc[] __initdata = {
- {
- .virtual = VISION_VIRT_BASE,
- .pfn = __phys_to_pfn(VISION_PHYS_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static void __init vision_map_io(void)
-{
- ep93xx_map_io();
-
- iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc));
-}
-
-/*************************************************************************
- * Ethernet
- *************************************************************************/
-static struct ep93xx_eth_data vision_eth_data __initdata = {
- .phy_id = 1,
-};
-
-/*************************************************************************
- * Framebuffer
- *************************************************************************/
-#define VISION_LCD_ENABLE EP93XX_GPIO_LINE_EGPIO1
-
-static int vision_lcd_setup(struct platform_device *pdev)
-{
- int err;
-
- err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH,
- dev_name(&pdev->dev));
- if (err)
- return err;
-
- ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS |
- EP93XX_SYSCON_DEVCFG_RASONP3 |
- EP93XX_SYSCON_DEVCFG_EXVC);
-
- return 0;
-}
-
-static void vision_lcd_teardown(struct platform_device *pdev)
-{
- gpio_free(VISION_LCD_ENABLE);
-}
-
-static void vision_lcd_blank(int blank_mode, struct fb_info *info)
-{
- if (blank_mode)
- gpio_set_value(VISION_LCD_ENABLE, 0);
- else
- gpio_set_value(VISION_LCD_ENABLE, 1);
-}
-
-static struct ep93xxfb_mach_info ep93xxfb_info __initdata = {
- .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
- .setup = vision_lcd_setup,
- .teardown = vision_lcd_teardown,
- .blank = vision_lcd_blank,
-};
-
-
-/*************************************************************************
- * GPIO Expanders
- *************************************************************************/
-#define PCA9539_74_GPIO_BASE (EP93XX_GPIO_LINE_MAX + 1)
-#define PCA9539_75_GPIO_BASE (PCA9539_74_GPIO_BASE + 16)
-#define PCA9539_76_GPIO_BASE (PCA9539_75_GPIO_BASE + 16)
-#define PCA9539_77_GPIO_BASE (PCA9539_76_GPIO_BASE + 16)
-
-static struct pca953x_platform_data pca953x_74_gpio_data = {
- .gpio_base = PCA9539_74_GPIO_BASE,
- .irq_base = EP93XX_BOARD_IRQ(0),
-};
-
-static struct pca953x_platform_data pca953x_75_gpio_data = {
- .gpio_base = PCA9539_75_GPIO_BASE,
- .irq_base = -1,
-};
-
-static struct pca953x_platform_data pca953x_76_gpio_data = {
- .gpio_base = PCA9539_76_GPIO_BASE,
- .irq_base = -1,
-};
-
-static struct pca953x_platform_data pca953x_77_gpio_data = {
- .gpio_base = PCA9539_77_GPIO_BASE,
- .irq_base = -1,
-};
-
-/*************************************************************************
- * I2C Bus
- *************************************************************************/
-
-static struct i2c_board_info vision_i2c_info[] __initdata = {
- {
- I2C_BOARD_INFO("isl1208", 0x6f),
- .irq = IRQ_EP93XX_EXT1,
- }, {
- I2C_BOARD_INFO("pca9539", 0x74),
- .platform_data = &pca953x_74_gpio_data,
- }, {
- I2C_BOARD_INFO("pca9539", 0x75),
- .platform_data = &pca953x_75_gpio_data,
- }, {
- I2C_BOARD_INFO("pca9539", 0x76),
- .platform_data = &pca953x_76_gpio_data,
- }, {
- I2C_BOARD_INFO("pca9539", 0x77),
- .platform_data = &pca953x_77_gpio_data,
- },
-};
-
-/*************************************************************************
- * SPI CS4271 Audio Codec
- *************************************************************************/
-static struct cs4271_platform_data vision_cs4271_data = {
- .gpio_nreset = EP93XX_GPIO_LINE_H(2),
-};
-
-/*************************************************************************
- * SPI Flash
- *************************************************************************/
-static struct mtd_partition vision_spi_flash_partitions[] = {
- {
- .name = "SPI bootstrap",
- .offset = 0,
- .size = SZ_4K,
- }, {
- .name = "Bootstrap config",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_4K,
- }, {
- .name = "System config",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct flash_platform_data vision_spi_flash_data = {
- .name = "SPI Flash",
- .parts = vision_spi_flash_partitions,
- .nr_parts = ARRAY_SIZE(vision_spi_flash_partitions),
-};
-
-/*************************************************************************
- * SPI SD/MMC host
- *************************************************************************/
-static struct mmc_spi_platform_data vision_spi_mmc_data = {
- .detect_delay = 100,
- .powerup_msecs = 100,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .caps2 = MMC_CAP2_RO_ACTIVE_HIGH,
-};
-
-static struct gpiod_lookup_table vision_spi_mmc_gpio_table = {
- .dev_id = "mmc_spi.2", /* "mmc_spi @ CS2 */
- .table = {
- /* Card detect */
- GPIO_LOOKUP_IDX("gpio-ep93xx.1", 7, NULL, 0, GPIO_ACTIVE_LOW),
- /* Write protect */
- GPIO_LOOKUP_IDX("gpio-ep93xx.5", 0, NULL, 1, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-/*************************************************************************
- * SPI Bus
- *************************************************************************/
-static struct spi_board_info vision_spi_board_info[] __initdata = {
- {
- .modalias = "cs4271",
- .platform_data = &vision_cs4271_data,
- .max_speed_hz = 6000000,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_3,
- }, {
- .modalias = "sst25l",
- .platform_data = &vision_spi_flash_data,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 1,
- .mode = SPI_MODE_3,
- }, {
- .modalias = "mmc_spi",
- .platform_data = &vision_spi_mmc_data,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 2,
- .mode = SPI_MODE_3,
- },
-};
-
-static struct gpiod_lookup_table vision_spi_cs_gpio_table = {
- .dev_id = "spi0",
- .table = {
- GPIO_LOOKUP_IDX("gpio-ep93xx.0", 6, "cs", 0, GPIO_ACTIVE_LOW),
- GPIO_LOOKUP_IDX("gpio-ep93xx.0", 7, "cs", 1, GPIO_ACTIVE_LOW),
- GPIO_LOOKUP_IDX("gpio-ep93xx.6", 2, "cs", 2, GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct ep93xx_spi_info vision_spi_master __initdata = {
- .use_dma = 1,
-};
-
-/*************************************************************************
- * I2S Audio
- *************************************************************************/
-static struct platform_device vision_audio_device = {
- .name = "edb93xx-audio",
- .id = -1,
-};
-
-static void __init vision_register_i2s(void)
-{
- ep93xx_register_i2s();
- platform_device_register(&vision_audio_device);
-}
-
-/*************************************************************************
- * Machine Initialization
- *************************************************************************/
-static void __init vision_init_machine(void)
-{
- ep93xx_init_devices();
- ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M);
- ep93xx_register_eth(&vision_eth_data, 1);
- ep93xx_register_fb(&ep93xxfb_info);
- ep93xx_register_pwm(1, 0);
-
- /*
- * Request the gpio expander's interrupt gpio line now to prevent
- * the kernel from doing a WARN in gpiolib:gpio_ensure_requested().
- */
- if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN,
- "pca9539:74"))
- pr_warn("cannot request interrupt gpio for pca9539:74\n");
-
- vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7));
-
- ep93xx_register_i2c(vision_i2c_info,
- ARRAY_SIZE(vision_i2c_info));
- gpiod_add_lookup_table(&vision_spi_mmc_gpio_table);
- gpiod_add_lookup_table(&vision_spi_cs_gpio_table);
- ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
- ARRAY_SIZE(vision_spi_board_info));
- vision_register_i2s();
-}
-
-MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
- /* Maintainer: H Hartley Sweeten <hsweeten@...ionengravers.com> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS + EP93XX_BOARD_IRQS,
- .map_io = vision_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = vision_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
--
2.39.2
Powered by blists - more mailing lists