netdev - [PATCHv4 net 2/2] team: reset team's flags when down link is P2P device

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230721040356.3591174-3-liuhangbin@gmail.com>
Date: Fri, 21 Jul 2023 12:03:56 +0800
From: Hangbin Liu <liuhangbin@...il.com>
To: netdev@...r.kernel.org
Cc: Jay Vosburgh <j.vosburgh@...il.com>,
	"David S . Miller" <davem@...emloft.net>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Eric Dumazet <edumazet@...gle.com>,
	Liang Li <liali@...hat.com>,
	Jiri Pirko <jiri@...dia.com>,
	Nikolay Aleksandrov <razor@...ckwall.org>,
	Hangbin Liu <liuhangbin@...il.com>
Subject: [PATCHv4 net 2/2] team: reset team's flags when down link is P2P device

When adding a point to point downlink to team device, we neglected to reset
the team's flags, which were still using flags like BROADCAST and
MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink
interfaces, such as when adding a GRE device to team device. Fix this by
remove multicast/broadcast flags and add p2p and noarp flags.

After removing the none ethernet interface and adding an ethernet interface
to team, we need to reset team interface flags. Unlike bonding interface,
team do not need restore IFF_MASTER, IFF_SLAVE flags.

Reported-by: Liang Li <liali@...hat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438
Fixes: 1d76efe1577b ("team: add support for non-ethernet devices")
Signed-off-by: Hangbin Liu <liuhangbin@...il.com>
---
v4: just reset the flags, no need to do ether_setup(), as Paolo pointed.
v3: add function team_ether_setup to reset team back to ethernet.
v2: Add the missed {} after if checking.
---
 drivers/net/team/team.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index 555b0b1e9a78..d3dc22509ea5 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -2135,6 +2135,15 @@ static void team_setup_by_port(struct net_device *dev,
 	dev->mtu = port_dev->mtu;
 	memcpy(dev->broadcast, port_dev->broadcast, port_dev->addr_len);
 	eth_hw_addr_inherit(dev, port_dev);
+
+	if (port_dev->flags & IFF_POINTOPOINT) {
+		dev->flags &= ~(IFF_BROADCAST | IFF_MULTICAST);
+		dev->flags |= (IFF_POINTOPOINT | IFF_NOARP);
+	} else if ((port_dev->flags & (IFF_BROADCAST | IFF_MULTICAST)) ==
+		    (IFF_BROADCAST | IFF_MULTICAST)) {
+		dev->flags |= (IFF_BROADCAST | IFF_MULTICAST);
+		dev->flags &= ~(IFF_POINTOPOINT | IFF_NOARP);
+	}
 }
 
 static int team_dev_type_check_change(struct net_device *dev,
-- 
2.38.1