| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 22 Jul 2023 02:31:12 +0200
From: Mirsad Todorovac <mirsad.todorovac@....unizg.hr>
To: Petr Machata <petrm@...dia.com>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Shuah Khan <shuah@...nel.org>, linux-kselftest@...r.kernel.org,
Ido Schimmel <idosch@...dia.com>
Subject: Re: [PROBLEM] [ADDITIONAL DIAG] seltests: net/forwarding/sch_ets.sh
[HANG]
On 7/20/23 18:25, Mirsad Todorovac wrote:
> On 7/20/23 18:07, Mirsad Todorovac wrote:
>> On 7/20/23 11:43, Petr Machata wrote:
>>>
>>> Mirsad Todorovac <mirsad.todorovac@....unizg.hr> writes:
>>>
>>>> Using the same config for 6.5-rc2 on Ubuntu 22.04 LTS and 22.10, the execution
>>>> stop at the exact same line on both boxes (os I reckon it is more than an
>>>> accident):
>>>>
>>>> # selftests: net/forwarding: sch_ets.sh
>>>> # TEST: ping vlan 10 [ OK ]
>>>> # TEST: ping vlan 11 [ OK ]
>>>> # TEST: ping vlan 12 [ OK ]
>>>> # Running in priomap mode
>>>> # Testing ets bands 3 strict 3, streams 0 1
>>>> # TEST: band 0 [ OK ]
>>>> # INFO: Expected ratio >95% Measured ratio 100.00
>>>> # TEST: band 1 [ OK ]
>>>> # INFO: Expected ratio <5% Measured ratio 0
>>>> # Testing ets bands 3 strict 3, streams 1 2
>>>> # TEST: band 1 [ OK ]
>>>> # INFO: Expected ratio >95% Measured ratio 100.00
>>>> # TEST: band 2 [ OK ]
>>>> # INFO: Expected ratio <5% Measured ratio 0
>>>> # Testing ets bands 4 strict 1 quanta 5000 2500 1500, streams 0 1
>>>> # TEST: band 0 [ OK ]
>>>> # INFO: Expected ratio >95% Measured ratio 100.00
>>>> # TEST: band 1 [ OK ]
>>>> # INFO: Expected ratio <5% Measured ratio 0
>>>> # Testing ets bands 4 strict 1 quanta 5000 2500 1500, streams 1 2
>>>> # TEST: bands 1:2 [ OK ]
>>>> # INFO: Expected ratio 2.00 Measured ratio 1.99
>>>> # Testing ets bands 3 quanta 3300 3300 3300, streams 0 1 2
>>>> # TEST: bands 0:1 [ OK ]
>>>> # INFO: Expected ratio 1.00 Measured ratio .99
>>>> # TEST: bands 0:2 [ OK ]
>>>> # INFO: Expected ratio 1.00 Measured ratio 1.00
>>>> # Testing ets bands 3 quanta 5000 3500 1500, streams 0 1 2
>>>> # TEST: bands 0:1 [ OK ]
>>>> # INFO: Expected ratio 1.42 Measured ratio 1.42
>>>> # TEST: bands 0:2 [ OK ]
>>>> # INFO: Expected ratio 3.33 Measured ratio 3.33
>>>> # Testing ets bands 3 quanta 5000 8000 1500, streams 0 1 2
>>>> # TEST: bands 0:1 [ OK ]
>>>> # INFO: Expected ratio 1.60 Measured ratio 1.59
>>>> # TEST: bands 0:2 [ OK ]
>>>> # INFO: Expected ratio 3.33 Measured ratio 3.33
>>>> # Testing ets bands 2 quanta 5000 2500, streams 0 1
>>>> # TEST: bands 0:1 [ OK ]
>>>> # INFO: Expected ratio 2.00 Measured ratio 1.99
>>>> # Running in classifier mode
>>>> # Testing ets bands 3 strict 3, streams 0 1
>>>> # TEST: band 0 [ OK ]
>>>> # INFO: Expected ratio >95% Measured ratio 100.00
>>>> # TEST: band 1 [ OK ]
>>>> # INFO: Expected ratio <5% Measured ratio 0
>>>> # Testing ets bands 3 strict 3, streams 1 2
>>>> # TEST: band 1 [ OK ]
>>>> # INFO: Expected ratio >95% Measured ratio 100.00
>>>> # TEST: band 2 [ OK ]
>>>> # INFO: Expected ratio <5% Measured ratio 0
>>>> # Testing ets bands 4 strict 1 quanta 5000 2500 1500, streams 0 1
>>>>
>>>> I tried to run 'set -x' enabled version standalone, but that one finished
>>>> correctly (?).
>>>>
>>>> It could be something previous scripts left, but right now I don't have a clue.
>>>> I can attempt to rerun all tests with sch_ets.sh bash 'set -x' enabled later today.
>>>
>>> If you run it standalone without set -x, does it finish as well?
>>
>> Added that. Yes, standlone run finishes correctly, with or without 'set -x':
>>
>> root@...iant:/home/marvin/linux/kernel/linux_torvalds/tools/testing/selftests/net/forwarding# ./sch_ets.sh
>> TEST: ping vlan 10 [ OK ]
>> TEST: ping vlan 11 [ OK ]
>> TEST: ping vlan 12 [ OK ]
>> Running in priomap mode
>> Testing ets bands 3 strict 3, streams 0 1
>> TEST: band 0 [ OK ]
>> INFO: Expected ratio >95% Measured ratio 100.00
>> TEST: band 1 [ OK ]
>> INFO: Expected ratio <5% Measured ratio 0
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> Testing ets bands 3 strict 3, streams 1 2
>> TEST: band 1 [ OK ]
>> INFO: Expected ratio >95% Measured ratio 100.00
>> TEST: band 2 [ OK ]
>> INFO: Expected ratio <5% Measured ratio 0
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> Testing ets bands 4 strict 1 quanta 5000 2500 1500, streams 0 1
>> TEST: band 0 [ OK ]
>> INFO: Expected ratio >95% Measured ratio 100.00
>> TEST: band 1 [ OK ]
>> INFO: Expected ratio <5% Measured ratio 0
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> Testing ets bands 4 strict 1 quanta 5000 2500 1500, streams 1 2
>> TEST: bands 1:2 [ OK ]
>> INFO: Expected ratio 2.00 Measured ratio 1.99
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> Testing ets bands 3 quanta 3300 3300 3300, streams 0 1 2
>> TEST: bands 0:1 [ OK ]
>> INFO: Expected ratio 1.00 Measured ratio 1.00
>> TEST: bands 0:2 [ OK ]
>> INFO: Expected ratio 1.00 Measured ratio .99
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> Testing ets bands 3 quanta 5000 3500 1500, streams 0 1 2
>> TEST: bands 0:1 [ OK ]
>> INFO: Expected ratio 1.42 Measured ratio 1.42
>> TEST: bands 0:2 [ OK ]
>> INFO: Expected ratio 3.33 Measured ratio 3.33
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> Testing ets bands 3 quanta 5000 8000 1500, streams 0 1 2
>> TEST: bands 0:1 [ OK ]
>> INFO: Expected ratio 1.60 Measured ratio 1.59
>> TEST: bands 0:2 [ OK ]
>> INFO: Expected ratio 3.33 Measured ratio 3.33
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> Testing ets bands 2 quanta 5000 2500, streams 0 1
>> TEST: bands 0:1 [ OK ]
>> INFO: Expected ratio 2.00 Measured ratio 1.99
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> Running in classifier mode
>> Testing ets bands 3 strict 3, streams 0 1
>> TEST: band 0 [ OK ]
>> INFO: Expected ratio >95% Measured ratio 100.00
>> TEST: band 1 [ OK ]
>> INFO: Expected ratio <5% Measured ratio 0
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> Testing ets bands 3 strict 3, streams 1 2
>> TEST: band 1 [ OK ]
>> INFO: Expected ratio >95% Measured ratio 100.00
>> TEST: band 2 [ OK ]
>> INFO: Expected ratio <5% Measured ratio 0
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> Testing ets bands 4 strict 1 quanta 5000 2500 1500, streams 0 1
>> TEST: band 0 [ OK ]
>> INFO: Expected ratio >95% Measured ratio 100.00
>> TEST: band 1 [ OK ]
>> INFO: Expected ratio <5% Measured ratio 0
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> Testing ets bands 4 strict 1 quanta 5000 2500 1500, streams 1 2
>> TEST: bands 1:2 [ OK ]
>> INFO: Expected ratio 2.00 Measured ratio 1.99
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> Testing ets bands 3 quanta 3300 3300 3300, streams 0 1 2
>> TEST: bands 0:1 [ OK ]
>> INFO: Expected ratio 1.00 Measured ratio .99
>> TEST: bands 0:2 [ OK ]
>> INFO: Expected ratio 1.00 Measured ratio .99
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> Testing ets bands 3 quanta 5000 3500 1500, streams 0 1 2
>> TEST: bands 0:1 [ OK ]
>> INFO: Expected ratio 1.42 Measured ratio 1.42
>> TEST: bands 0:2 [ OK ]
>> INFO: Expected ratio 3.33 Measured ratio 3.33
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> Testing ets bands 3 quanta 5000 8000 1500, streams 0 1 2
>> TEST: bands 0:1 [ OK ]
>> INFO: Expected ratio 1.60 Measured ratio 1.60
>> TEST: bands 0:2 [ OK ]
>> INFO: Expected ratio 3.33 Measured ratio 3.33
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> Testing ets bands 2 quanta 5000 2500, streams 0 1
>> TEST: bands 0:1 [ OK ]
>> INFO: Expected ratio 2.00 Measured ratio 2.00
>> killing MZ
>> killed MZ
>> killing MZ
>> killed MZ
>> root@...iant:/home/marvin/linux/kernel/linux_torvalds/tools/testing/selftests/net/forwarding#
>>
>>> That would imply that the reproducer needs to include the previous tests as
>>> well.
>>
>> This is entirely possible, as timeouts and CTRL+C events do not seem to be caught
>> and the cleanup is not done ...
>>
>> sch_ets_core.sh: trap cleanup EXIT
>>
>> Some tests time out even after settings:timeout=240, so IMHO this should be taken into account.
>>
>> Best regards,
>> Mirsad Todorovac
>>
>>> It looks like the test is stuck in ets_test_mixed in classifier_mode.
>>> A way to run just this test would be:
>>>
>>> TESTS="classifier_mode ets_test_mixed" ./sch_ets.sh
>>>
>>> Looking at the code, the only place that I can see that waits on
>>> anything is the "{ kill %% && wait %%; } 2>/dev/null" line in
>>> stop_traffic() (in lib.sh). Maybe something like this would let
>>> us see if that's the case:
>>>
>>> modified tools/testing/selftests/net/forwarding/lib.sh
>>> @@ -1468,8 +1470,10 @@ start_tcp_traffic()
>>> stop_traffic()
>>> {
>>> + echo killing MZ
>>> # Suppress noise from killing mausezahn.
>>> { kill %% && wait %%; } 2>/dev/null
>>> + echo killed MZ
>>> }
>
> FYI, this is the [incomplete] list of the tests that time out even after
> being assigned long timeout of 240s instead of default.
>
> marvin@...iant:~/linux/kernel/linux_torvalds$ grep TIMEOUT ../kselftest-6.5-rc2-net-forwarding-8.log
> not ok 13 selftests: net/forwarding: custom_multipath_hash.sh # TIMEOUT 240 seconds
> not ok 18 selftests: net/forwarding: gre_custom_multipath_hash.sh # TIMEOUT 240 seconds
> not ok 19 selftests: net/forwarding: gre_inner_v4_multipath.sh # TIMEOUT 240 seconds
> not ok 21 selftests: net/forwarding: gre_multipath_nh_res.sh # TIMEOUT 240 seconds
> not ok 22 selftests: net/forwarding: gre_multipath_nh.sh # TIMEOUT 240 seconds
> not ok 27 selftests: net/forwarding: ip6gre_custom_multipath_hash.sh # TIMEOUT 240 seconds
> not ok 34 selftests: net/forwarding: ip6gre_inner_v4_multipath.sh # TIMEOUT 240 seconds
> not ok 58 selftests: net/forwarding: no_forwarding.sh # TIMEOUT 240 seconds
> not ok 67 selftests: net/forwarding: router_mpath_nh_res.sh # TIMEOUT 240 seconds
> not ok 68 selftests: net/forwarding: router_mpath_nh.sh # TIMEOUT 240 seconds
> not ok 70 selftests: net/forwarding: router_multipath.sh # TIMEOUT 240 seconds
> marvin@...iant:~/linux/kernel/linux_torvalds$
The test seem to be stuck despite adding SIGTERM cleanup to all tests
that timed out:
# selftests: net/forwarding: sch_ets.sh
# TEST: ping vlan 10 [ OK ]
# TEST: ping vlan 11 [ OK ]
# TEST: ping vlan 12 [ OK ]
# Running in priomap mode
# Testing ets bands 3 strict 3, streams 0 1
# TEST: band 0 [ OK ]
# INFO: Expected ratio >95% Measured ratio 100.00
# TEST: band 1 [ OK ]
# INFO: Expected ratio <5% Measured ratio 0
# Testing ets bands 3 strict 3, streams 1 2
# TEST: band 1 [ OK ]
# INFO: Expected ratio >95% Measured ratio 100.00
# TEST: band 2 [ OK ]
# INFO: Expected ratio <5% Measured ratio 0
# Testing ets bands 4 strict 1 quanta 5000 2500 1500, streams 0 1
# TEST: band 0 [ OK ]
# INFO: Expected ratio >95% Measured ratio 100.00
# TEST: band 1 [ OK ]
# INFO: Expected ratio <5% Measured ratio 0
# Testing ets bands 4 strict 1 quanta 5000 2500 1500, streams 1 2
# TEST: bands 1:2 [ OK ]
# INFO: Expected ratio 2.00 Measured ratio 2.00
# Testing ets bands 3 quanta 3300 3300 3300, streams 0 1 2
# TEST: bands 0:1 [ OK ]
# INFO: Expected ratio 1.00 Measured ratio .99
# TEST: bands 0:2 [ OK ]
# INFO: Expected ratio 1.00 Measured ratio .99
# Testing ets bands 3 quanta 5000 3500 1500, streams 0 1 2
# TEST: bands 0:1 [ OK ]
# INFO: Expected ratio 1.42 Measured ratio 1.42
# TEST: bands 0:2 [ OK ]
# INFO: Expected ratio 3.33 Measured ratio 3.33
# Testing ets bands 3 quanta 5000 8000 1500, streams 0 1 2
# TEST: bands 0:1 [ OK ]
# INFO: Expected ratio 1.60 Measured ratio 1.59
# TEST: bands 0:2 [ OK ]
# INFO: Expected ratio 3.33 Measured ratio 3.33
# Testing ets bands 2 quanta 5000 2500, streams 0 1
# TEST: bands 0:1 [ OK ]
# INFO: Expected ratio 2.00 Measured ratio 1.99
# Running in classifier mode
# Testing ets bands 3 strict 3, streams 0 1
# TEST: band 0 [ OK ]
# INFO: Expected ratio >95% Measured ratio 100.00
# TEST: band 1 [ OK ]
# INFO: Expected ratio <5% Measured ratio 0
# Testing ets bands 3 strict 3, streams 1 2
# TEST: band 1 [ OK ]
# INFO: Expected ratio >95% Measured ratio 100.00
# TEST: band 2 [ OK ]
# INFO: Expected ratio <5% Measured ratio 0
# Testing ets bands 4 strict 1 quanta 5000 2500 1500, streams 0 1
What is happening is a stuck mousezahn loop:
root 558266 2732 0 01:17 pts/2 00:00:23 mausezahn veth0.10 -p 8000 -A 192.0.2.1 -B 192.0.2.2 -c 0 -a own -b ba:33:37:81:dc:5
root 558273 2732 0 01:17 pts/2 00:00:23 mausezahn veth0.11 -p 8000 -A 192.0.2.17 -B 192.0.2.18 -c 0 -a own -b ba:33:37:81:dc
$ sudo strace -p 558266
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
ioctl(5, SIOCGIFINDEX, {ifr_name="veth0.10"}) = -1 ENODEV (No such device)
I am not sure if this will ever complete, or is it a runaway loop?
Probably it is stuck, for nothing was written to the test log for 71 minutes.
I hope we are coming closer to the cause.
Previously I didn't figure out what hanged.
FWIW, I will post the patches for the scripts that timed out for your review.
Kind regards,
Mirsad
Powered by blists - more mailing lists