netdev - Re: [PATCH v2] spi: fsl-dspi: Use dev_err_probe() in dspi_request

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230725170535.7eh7gciw4j33ds3p@skbuf>
Date: Tue, 25 Jul 2023 20:05:35 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: Minjie Du <duminjie@...o.com>
Cc: Mark Brown <broonie@...nel.org>,
	Richard Cochran <richardcochran@...il.com>,
	"open list:FREESCALE DSPI DRIVER" <linux-spi@...r.kernel.org>,
	open list <linux-kernel@...r.kernel.org>,
	"open list:PTP HARDWARE CLOCK SUPPORT" <netdev@...r.kernel.org>,
	opensource.kernel@...o.com
Subject: Re: [PATCH v2] spi: fsl-dspi: Use dev_err_probe() in
 dspi_request_dma()

On Tue, Jul 25, 2023 at 11:50:37AM +0800, Minjie Du wrote:
> It is possible for dma_request_chan() to return EPROBE_DEFER, which means
> dev is not ready yet.
> At this point dev_err() will have no output.
> 
> Signed-off-by: Minjie Du <duminjie@...o.com>
> ---
>  drivers/spi/spi-fsl-dspi.c | 7 +++----
>  1 file changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
> index ca41c8a8b..6aaa529b7 100644
> --- a/drivers/spi/spi-fsl-dspi.c
> +++ b/drivers/spi/spi-fsl-dspi.c
> @@ -503,15 +503,14 @@ static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
>  
>  	dma->chan_rx = dma_request_chan(dev, "rx");
>  	if (IS_ERR(dma->chan_rx)) {
> -		dev_err(dev, "rx dma channel not available\n");
> -		ret = PTR_ERR(dma->chan_rx);
> -		return ret;
> +		return dev_err_probe(dev, PTR_ERR(dma->chan_rx),
> +			"rx dma channel not available\n");

This does not have correct alignment either. Tabs are supposed to be
rendered using 8 spaces.

>  	}
>  
>  	dma->chan_tx = dma_request_chan(dev, "tx");
>  	if (IS_ERR(dma->chan_tx)) {
> -		dev_err(dev, "tx dma channel not available\n");
>  		ret = PTR_ERR(dma->chan_tx);
> +		dev_err_probe(dev, ret, "tx dma channel not available\n");
>  		goto err_tx_channel;
>  	}
>  
> -- 
> 2.39.0
>