[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230728141923.162477-2-msp@baylibre.com>
Date: Fri, 28 Jul 2023 16:19:18 +0200
From: Markus Schneider-Pargmann <msp@...libre.com>
To: Wolfgang Grandegger <wg@...ndegger.com>,
Marc Kleine-Budde <mkl@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: "David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Conor Dooley <conor+dt@...nel.org>,
Chandrasekar Ramakrishnan <rcsekar@...sung.com>,
Michal Kubiak <michal.kubiak@...el.com>,
Vivek Yadav <vivek.2311@...sung.com>,
linux-can@...r.kernel.org,
netdev@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Simon Horman <simon.horman@...igine.com>,
Markus Schneider-Pargmann <msp@...libre.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v4 1/6] dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants
These two new chips do not have state or wake pins.
Signed-off-by: Markus Schneider-Pargmann <msp@...libre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
.../devicetree/bindings/net/can/tcan4x5x.txt | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index e3501bfa22e9..170e23f0610d 100644
--- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -4,7 +4,10 @@ Texas Instruments TCAN4x5x CAN Controller
This file provides device node information for the TCAN4x5x interface contains.
Required properties:
- - compatible: "ti,tcan4x5x"
+ - compatible:
+ "ti,tcan4552", "ti,tcan4x5x"
+ "ti,tcan4553", "ti,tcan4x5x" or
+ "ti,tcan4x5x"
- reg: 0
- #address-cells: 1
- #size-cells: 0
@@ -21,8 +24,10 @@ Optional properties:
- reset-gpios: Hardwired output GPIO. If not defined then software
reset.
- device-state-gpios: Input GPIO that indicates if the device is in
- a sleep state or if the device is active.
- - device-wake-gpios: Wake up GPIO to wake up the TCAN device.
+ a sleep state or if the device is active. Not
+ available with tcan4552/4553.
+ - device-wake-gpios: Wake up GPIO to wake up the TCAN device. Not
+ available with tcan4552/4553.
Example:
tcan4x5x: tcan4x5x@0 {
--
2.40.1
Powered by blists - more mailing lists