[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230728150857.2374886-1-frank.jungclaus@esd.eu>
Date: Fri, 28 Jul 2023 17:08:56 +0200
From: Frank Jungclaus <frank.jungclaus@....eu>
To: linux-can@...r.kernel.org,
Marc Kleine-Budde <mkl@...gutronix.de>,
Wolfgang Grandegger <wg@...ndegger.com>,
Vincent Mailhol <mailhol.vincent@...adoo.fr>
Cc: Stefan Mätje <stefan.maetje@....eu>,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
Frank Jungclaus <frank.jungclaus@....eu>
Subject: [PATCH 0/1] can: esd_usb: Add support for esd CAN-USB/3
After having applied a vast number of improvements to the existing
CAN-USB/2 driver here now is a new attempt to add support for the esd
CAN-USB/3 CAN FD interface.
Beside this patch there are the following to-do's left for follow-up
patches:
* In principle, the esd CAN-USB/3 supports Transmitter Delay
Compensation (TDC), but currently only the automatic TDC mode is
supported by this driver. An implementation for manual TDC
configuration will follow.
* Rework the code to no longer switch directly on the USB product IDs
to handle different device setting for each supported USB
device. Instead use the driver_info member within struct usb_device_id
to hold / point to specific properties for each supported device.
* Try to switch from synchronous send usb_bulk_msg() to asynchronous
communication by means of usb_submit_urb() where it is feasible.
Frank Jungclaus (1):
can: esd_usb: Add support for esd CAN-USB/3
drivers/net/can/usb/esd_usb.c | 275 ++++++++++++++++++++++++++++++----
1 file changed, 244 insertions(+), 31 deletions(-)
base-commit: 68af900072c157c0cdce0256968edd15067e1e5a
--
2.25.1
Powered by blists - more mailing lists