| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230729115509.32601-5-ansuelsmth@gmail.com>
Date: Sat, 29 Jul 2023 13:55:09 +0200
From: Christian Marangi <ansuelsmth@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Christian Marangi <ansuelsmth@...il.com>,
Yang Yingliang <yangyingliang@...wei.com>,
"Russell King (Oracle)" <rmk+kernel@...linux.org.uk>,
Atin Bainada <hi@...nb.me>,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [net-next PATCH v2 5/5] net: dsa: qca8k: use dsa_for_each macro instead of for loop
Convert for loop to dsa_for_each macro to save some redundant write on
unconnected/unused port and tidy things up.
Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
---
drivers/net/dsa/qca/qca8k-8xxx.c | 109 ++++++++++++++++---------------
1 file changed, 57 insertions(+), 52 deletions(-)
diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c
index 81c6fab0a01b..1434f145aa9c 100644
--- a/drivers/net/dsa/qca/qca8k-8xxx.c
+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
@@ -1800,7 +1800,8 @@ static int
qca8k_setup(struct dsa_switch *ds)
{
struct qca8k_priv *priv = ds->priv;
- int cpu_port, ret, i;
+ int cpu_port, ret, port;
+ struct dsa_port *dp;
u32 mask;
cpu_port = qca8k_find_cpu_port(ds);
@@ -1855,27 +1856,31 @@ qca8k_setup(struct dsa_switch *ds)
dev_warn(priv->dev, "mib init failed");
/* Initial setup of all ports */
- for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ dsa_switch_for_each_port(dp, ds) {
+ port = dp->index;
+
/* Disable forwarding by default on all ports */
- ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
QCA8K_PORT_LOOKUP_MEMBER, 0);
if (ret)
return ret;
- /* Enable QCA header mode on all cpu ports */
- if (dsa_is_cpu_port(ds, i)) {
- ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i),
- FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) |
- FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL));
- if (ret) {
- dev_err(priv->dev, "failed enabling QCA header mode");
- return ret;
- }
- }
-
/* Disable MAC by default on all user ports */
if (dsa_is_user_port(ds, i))
- qca8k_port_set_status(priv, i, 0);
+ qca8k_port_set_status(priv, port, 0);
+ }
+
+ /* Enable QCA header mode on all cpu ports */
+ dsa_switch_for_each_cpu_port(dp, ds) {
+ port = dp->index;
+
+ ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(port),
+ FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) |
+ FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL));
+ if (ret) {
+ dev_err(priv->dev, "failed enabling QCA header mode on port %d", port);
+ return ret;
+ }
}
/* Forward all unknown frames to CPU port for Linux processing
@@ -1897,48 +1902,48 @@ qca8k_setup(struct dsa_switch *ds)
return ret;
/* Setup connection between CPU port & user ports
- * Configure specific switch configuration for ports
+ * Individual user ports get connected to CPU port only
*/
- for (i = 0; i < QCA8K_NUM_PORTS; i++) {
- /* Individual user ports get connected to CPU port only */
- if (dsa_is_user_port(ds, i)) {
- ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
- QCA8K_PORT_LOOKUP_MEMBER,
- BIT(cpu_port));
- if (ret)
- return ret;
-
- ret = regmap_clear_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i),
- QCA8K_PORT_LOOKUP_LEARN);
- if (ret)
- return ret;
-
- /* For port based vlans to work we need to set the
- * default egress vid
- */
- ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
- QCA8K_EGREES_VLAN_PORT_MASK(i),
- QCA8K_EGREES_VLAN_PORT(i, QCA8K_PORT_VID_DEF));
- if (ret)
- return ret;
-
- ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
- QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
- QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
- if (ret)
- return ret;
- }
+ dsa_switch_for_each_user_port(dp, ds) {
+ port = dp->index;
- /* The port 5 of the qca8337 have some problem in flood condition. The
- * original legacy driver had some specific buffer and priority settings
- * for the different port suggested by the QCA switch team. Add this
- * missing settings to improve switch stability under load condition.
- * This problem is limited to qca8337 and other qca8k switch are not affected.
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_MEMBER,
+ BIT(cpu_port));
+ if (ret)
+ return ret;
+
+ ret = regmap_clear_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_LEARN);
+ if (ret)
+ return ret;
+
+ /* For port based vlans to work we need to set the
+ * default egress vid
*/
- if (priv->switch_id == QCA8K_ID_QCA8337)
- qca8k_setup_hol_fixup(priv, i);
+ ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port),
+ QCA8K_EGREES_VLAN_PORT_MASK(port),
+ QCA8K_EGREES_VLAN_PORT(port, QCA8K_PORT_VID_DEF));
+ if (ret)
+ return ret;
+
+ ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port),
+ QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
+ QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
+ if (ret)
+ return ret;
}
+ /* The port 5 of the qca8337 have some problem in flood condition. The
+ * original legacy driver had some specific buffer and priority settings
+ * for the different port suggested by the QCA switch team. Add this
+ * missing settings to improve switch stability under load condition.
+ * This problem is limited to qca8337 and other qca8k switch are not affected.
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8337)
+ dsa_switch_for_each_available_port(dp, ds)
+ qca8k_setup_hol_fixup(priv, dp->index);
+
/* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
if (priv->switch_id == QCA8K_ID_QCA8327) {
mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) |
--
2.40.1
Powered by blists - more mailing lists