[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230731-topic-oxnas-upstream-remove-v3-2-a1bddb085629@linaro.org>
Date: Mon, 31 Jul 2023 16:41:11 +0200
From: Neil Armstrong <neil.armstrong@...aro.org>
To: Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>, "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-oxnas@...ups.io,
devicetree@...r.kernel.org, Neil Armstrong <neil.armstrong@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>, Arnd Bergmann <arnd@...db.de>,
Daniel Golle <daniel@...rotopia.org>,
Conor Dooley <conor.dooley@...rochip.com>
Subject: [PATCH net-next v3 2/2] dt-bindings: net: oxnas-dwmac: remove
obsolete bindings
Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove the
OX810 and OX820 dwmac glue.
Acked-by: Linus Walleij <linus.walleij@...aro.org>
Acked-by: Arnd Bergmann <arnd@...db.de>
Acked-by: Daniel Golle <daniel@...rotopia.org>
Acked-by: Conor Dooley <conor.dooley@...rochip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
---
.../devicetree/bindings/net/oxnas-dwmac.txt | 41 ----------------------
1 file changed, 41 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
deleted file mode 100644
index 27db496f1ce8..000000000000
--- a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Oxford Semiconductor OXNAS DWMAC Ethernet controller
-
-The device inherits all the properties of the dwmac/stmmac devices
-described in the file stmmac.txt in the current directory with the
-following changes.
-
-Required properties on all platforms:
-
-- compatible: For the OX820 SoC, it should be :
- - "oxsemi,ox820-dwmac" to select glue
- - "snps,dwmac-3.512" to select IP version.
- For the OX810SE SoC, it should be :
- - "oxsemi,ox810se-dwmac" to select glue
- - "snps,dwmac-3.512" to select IP version.
-
-- clocks: Should contain phandles to the following clocks
-- clock-names: Should contain the following:
- - "stmmaceth" for the host clock - see stmmac.txt
- - "gmac" for the peripheral gate clock
-
-- oxsemi,sys-ctrl: a phandle to the system controller syscon node
-
-Example :
-
-etha: ethernet@...00000 {
- compatible = "oxsemi,ox820-dwmac", "snps,dwmac-3.512";
- reg = <0x40400000 0x2000>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq", "eth_wake_irq";
- mac-address = [000000000000]; /* Filled in by U-Boot */
- phy-mode = "rgmii";
-
- clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>;
- clock-names = "gmac", "stmmaceth";
- resets = <&reset RESET_MAC>;
-
- /* Regmap for sys registers */
- oxsemi,sys-ctrl = <&sys>;
-
-};
--
2.34.1
Powered by blists - more mailing lists