| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<AM5PR04MB3139E5A9A0B407922A33BF99880BA@AM5PR04MB3139.eurprd04.prod.outlook.com>
Date: Wed, 2 Aug 2023 12:33:34 +0000
From: Wei Fang <wei.fang@....com>
To: Jesper Dangaard Brouer <jbrouer@...hat.com>
CC: "brouer@...hat.com" <brouer@...hat.com>, dl-linux-imx <linux-imx@....com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"bpf@...r.kernel.org" <bpf@...r.kernel.org>, Andrew Lunn <andrew@...n.ch>,
"davem@...emloft.net" <davem@...emloft.net>, "edumazet@...gle.com"
<edumazet@...gle.com>, "kuba@...nel.org" <kuba@...nel.org>,
"pabeni@...hat.com" <pabeni@...hat.com>, Shenwei Wang <shenwei.wang@....com>,
Clark Wang <xiaoning.wang@....com>, "ast@...nel.org" <ast@...nel.org>,
"daniel@...earbox.net" <daniel@...earbox.net>, "hawk@...nel.org"
<hawk@...nel.org>, "john.fastabend@...il.com" <john.fastabend@...il.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: RE: [PATCH V3 net-next] net: fec: add XDP_TX feature support
Sorry, I missed some comments before.
> > @@ -1482,7 +1486,7 @@ fec_enet_tx_queue(struct net_device *ndev, u16
> queue_id, int budget)
> > /* Free the sk buffer associated with this last transmit */
> > dev_kfree_skb_any(skb);
> > } else {
> > - xdp_return_frame(xdpf);
> > + xdp_return_frame_rx_napi(xdpf);
> >
> > txq->tx_buf[index].xdp = NULL;
> > /* restore default tx buffer type: FEC_TXBUF_T_SKB */
> > @@ -1573,11 +1577,18 @@ fec_enet_run_xdp(struct fec_enet_private
> *fep, struct bpf_prog *prog,
> > }
> > break;
> >
> > - default:
> > - bpf_warn_invalid_xdp_action(fep->netdev, prog, act);
> > - fallthrough;
> > -
> > case XDP_TX:
> > + err = fec_enet_xdp_tx_xmit(fep->netdev, xdp);
>
> You should pass along the "sync" length value to fec_enet_xdp_tx_xmit().
> Because we know DMA comes from same device (it is already DMA mapped
> to), then we can do a DMA sync "to_device" with only the sync length.
>
I think it's okay if the frame length does not change, but if we increase the
length of the received frame, such as add a VLAN header into the frame, I
think the "sync" length value is not correct.
> > + if (err) {
>
> Add an unlikely(err) or do like above case XDP_REDIRECT, where it takes
> the likely case "if (!err)" first.
Yes, you are right, I will improve it.
>
> > + ret = FEC_ENET_XDP_CONSUMED;
> > + page = virt_to_head_page(xdp->data);
> > + page_pool_put_page(rxq->page_pool, page, sync, true);
> > + } else {
> > + ret = FEC_ENET_XDP_TX;
> > + }
> > + break;
> > +
> > + default:
> > bpf_warn_invalid_xdp_action(fep->netdev, prog, act);
> > fallthrough;
> >
> > @@ -3793,7 +3804,8 @@ fec_enet_xdp_get_tx_queue(struct
> fec_enet_private *fep, int index)
> >
> > static int fec_enet_txq_xmit_frame(struct fec_enet_private *fep,
> > struct fec_enet_priv_tx_q *txq,
> > - struct xdp_frame *frame)
> > + struct xdp_frame *frame,
> > + bool ndo_xmit)
>
> E.g add parameter dma_sync_len.
>
> > {
> > unsigned int index, status, estatus;
> > struct bufdesc *bdp;
> > @@ -3813,10 +3825,24 @@ static int fec_enet_txq_xmit_frame(struct
> fec_enet_private *fep,
> >
> > index = fec_enet_get_bd_index(bdp, &txq->bd);
> >
> > - dma_addr = dma_map_single(&fep->pdev->dev, frame->data,
> > - frame->len, DMA_TO_DEVICE);
> > - if (dma_mapping_error(&fep->pdev->dev, dma_addr))
> > - return -ENOMEM;
> > + if (ndo_xmit) {
> > + dma_addr = dma_map_single(&fep->pdev->dev, frame->data,
> > + frame->len, DMA_TO_DEVICE);
> > + if (dma_mapping_error(&fep->pdev->dev, dma_addr))
> > + return -ENOMEM;
> > +
> > + txq->tx_buf[index].type = FEC_TXBUF_T_XDP_NDO;
> > + } else {
> > + struct page *page = virt_to_page(frame->data);
> > +
> > + dma_addr = page_pool_get_dma_addr(page) + sizeof(*frame) +
> > + frame->headroom;
> > + dma_sync_single_for_device(&fep->pdev->dev, dma_addr,
> > + frame->len, DMA_BIDIRECTIONAL);
>
> Optimization: use dma_sync_len here instead of frame->len.
>
> > + txq->tx_buf[index].type = FEC_TXBUF_T_XDP_TX;
> > + }
> > +
> > + txq->tx_buf[index].xdp = frame;
> >
> > status |= (BD_ENET_TX_INTR | BD_ENET_TX_LAST);
> > if (fep->bufdesc_ex)
> > @@ -3835,9 +3861,6 @@ static int fec_enet_txq_xmit_frame(struct
> fec_enet_private *fep,
> > ebdp->cbd_esc = cpu_to_fec32(estatus);
> > }
> >
> > - txq->tx_buf[index].type = FEC_TXBUF_T_XDP_NDO;
> > - txq->tx_buf[index].xdp = frame;
> > -
> > /* Make sure the updates to rest of the descriptor are performed
> before
> > * transferring ownership.
> > */
> > @@ -3863,6 +3886,31 @@ static int fec_enet_txq_xmit_frame(struct
> fec_enet_private *fep,
> > return 0;
> > }
> >
> > +static int fec_enet_xdp_tx_xmit(struct net_device *ndev,
> > + struct xdp_buff *xdp)
> > +{
>
> E.g add parameter dma_sync_len.
>
> > + struct xdp_frame *xdpf = xdp_convert_buff_to_frame(xdp);
>
> XDP_TX can avoid this conversion to xdp_frame.
> It would requires some refactor of fec_enet_txq_xmit_frame().
>
Yes, but I'm not intend to change it, using the existing interface is enough.
> > + struct fec_enet_private *fep = netdev_priv(ndev);
> > + struct fec_enet_priv_tx_q *txq;
> > + int cpu = smp_processor_id();
> > + struct netdev_queue *nq;
> > + int queue, ret;
> > +
> > + queue = fec_enet_xdp_get_tx_queue(fep, cpu);
> > + txq = fep->tx_queue[queue];
> > + nq = netdev_get_tx_queue(fep->netdev, queue);
> > +
> > + __netif_tx_lock(nq, cpu);
>
> It is sad that XDP_TX takes a lock for each frame.
>
Yes, but the XDP path share the queue with the kernel network stack, so
we need a lock here, unless there is a dedicated queue for XDP path. Do
you have a better solution?
> > +
> > + /* Avoid tx timeout as XDP shares the queue with kernel stack */
> > + txq_trans_cond_update(nq);
> > + ret = fec_enet_txq_xmit_frame(fep, txq, xdpf, false);
>
> Add/pass parameter dma_sync_len to fec_enet_txq_xmit_frame().
>
>
> > +
> > + __netif_tx_unlock(nq);
> > +
> > + return ret;
> > +}
> > +
> > static int fec_enet_xdp_xmit(struct net_device *dev,
> > int num_frames,
> > struct xdp_frame **frames,
> > @@ -3885,7 +3933,7 @@ static int fec_enet_xdp_xmit(struct net_device
> *dev,
> > /* Avoid tx timeout as XDP shares the queue with kernel stack */
> > txq_trans_cond_update(nq);
> > for (i = 0; i < num_frames; i++) {
> > - if (fec_enet_txq_xmit_frame(fep, txq, frames[i]) < 0)
> > + if (fec_enet_txq_xmit_frame(fep, txq, frames[i], true) < 0)
> > break;
> > sent_frames++;
> > }
Powered by blists - more mailing lists