| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <ab0697a17cee6594bb9bbd72a151966a69c2efc0.1691047285.git.chenfeiyang@loongson.cn>
Date: Thu, 3 Aug 2023 19:30:05 +0800
From: Feiyang Chen <chenfeiyang@...ngson.cn>
To: andrew@...n.ch,
hkallweit1@...il.com,
peppe.cavallaro@...com,
alexandre.torgue@...s.st.com,
joabreu@...opsys.com,
chenhuacai@...ngson.cn
Cc: Feiyang Chen <chenfeiyang@...ngson.cn>,
linux@...linux.org.uk,
dongbiao@...ngson.cn,
loongson-kernel@...ts.loongnix.cn,
netdev@...r.kernel.org,
loongarch@...ts.linux.dev,
chris.chenfeiyang@...il.com
Subject: [PATCH v3 11/16] net: stmmac: dwmac-loongson: Refactor code for loongson_dwmac_probe()
Add a setup() function to initialize data, and simplify code for
loongson_dwmac_probe().
Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
---
.../ethernet/stmicro/stmmac/dwmac-loongson.c | 89 +++++++++++--------
1 file changed, 54 insertions(+), 35 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index a25c187d3185..ff4fa74d2a11 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -9,7 +9,12 @@
#include <linux/of_irq.h>
#include "stmmac.h"
-static int loongson_default_data(struct plat_stmmacenet_data *plat)
+struct stmmac_pci_info {
+ int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
+};
+
+static void loongson_default_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
{
plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
plat->has_gmac = 1;
@@ -34,23 +39,38 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat)
/* Disable RX queues routing by default */
plat->rx_queues_cfg[0].pkt_route = 0x0;
+}
+
+static int loongson_gmac_data(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat)
+{
+ loongson_default_data(pdev, plat);
+
+ plat->multicast_filter_bins = 256;
+
+ plat->mdio_bus_data->phy_mask = 0;
- /* Default to phy auto-detection */
plat->phy_addr = -1;
+ plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID;
plat->dma_cfg->pbl = 32;
plat->dma_cfg->pblx8 = true;
- plat->multicast_filter_bins = 256;
return 0;
}
-static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static struct stmmac_pci_info loongson_gmac_pci_info = {
+ .setup = loongson_gmac_data,
+};
+
+static int loongson_dwmac_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
{
+ int ret, i, bus_id, phy_mode;
struct plat_stmmacenet_data *plat;
+ struct stmmac_pci_info *info;
struct stmmac_resources res;
struct device_node *np;
- int ret, i, phy_mode;
np = dev_of_node(&pdev->dev);
@@ -59,39 +79,32 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
return -ENODEV;
}
- if (!of_device_is_compatible(np, "loongson, pci-gmac")) {
- pr_info("dwmac_loongson_pci: Incompatible OF node\n");
- return -ENODEV;
- }
-
plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
if (!plat)
return -ENOMEM;
+ plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
+ sizeof(*plat->mdio_bus_data),
+ GFP_KERNEL);
+ if (!plat->mdio_bus_data)
+ return -ENOMEM;
+
+ plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg),
+ GFP_KERNEL);
+ if (!plat->dma_cfg)
+ return -ENOMEM;
+
plat->mdio_node = of_get_child_by_name(np, "mdio");
if (plat->mdio_node) {
dev_info(&pdev->dev, "Found MDIO subnode\n");
-
- plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
- sizeof(*plat->mdio_bus_data),
- GFP_KERNEL);
- if (!plat->mdio_bus_data) {
- ret = -ENOMEM;
- goto err_put_node;
- }
plat->mdio_bus_data->needs_reset = true;
}
- plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), GFP_KERNEL);
- if (!plat->dma_cfg) {
- ret = -ENOMEM;
- goto err_put_node;
- }
-
/* Enable pci device */
ret = pci_enable_device(pdev);
if (ret) {
- dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n", __func__);
+ dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n",
+ __func__);
goto err_put_node;
}
@@ -105,9 +118,16 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
break;
}
- plat->bus_id = of_alias_get_id(np, "ethernet");
- if (plat->bus_id < 0)
- plat->bus_id = pci_dev_id(pdev);
+ pci_set_master(pdev);
+
+ info = (struct stmmac_pci_info *)id->driver_data;
+ ret = info->setup(pdev, plat);
+ if (ret)
+ goto err_disable_device;
+
+ bus_id = of_alias_get_id(np, "ethernet");
+ if (bus_id >= 0)
+ plat->bus_id = bus_id;
phy_mode = device_get_phy_mode(&pdev->dev);
if (phy_mode < 0) {
@@ -115,14 +135,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
ret = phy_mode;
goto err_disable_device;
}
-
plat->phy_interface = phy_mode;
- plat->interface = PHY_INTERFACE_MODE_GMII;
- pci_set_master(pdev);
-
- loongson_default_data(plat);
pci_enable_msi(pdev);
+
memset(&res, 0, sizeof(res));
res.addr = pcim_iomap_table(pdev)[0];
@@ -135,7 +151,8 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
if (res.wol_irq < 0) {
- dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
+ dev_info(&pdev->dev,
+ "IRQ eth_wake_irq not found, using macirq\n");
res.wol_irq = res.irq;
}
@@ -219,8 +236,10 @@ static int __maybe_unused loongson_dwmac_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops, loongson_dwmac_suspend,
loongson_dwmac_resume);
+#define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03
+
static const struct pci_device_id loongson_dwmac_id_table[] = {
- { PCI_VDEVICE(LOONGSON, 0x7a03) },
+ { PCI_DEVICE_DATA(LOONGSON, GMAC, &loongson_gmac_pci_info) },
{}
};
MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);
--
2.39.3
Powered by blists - more mailing lists