netdev - [PATCH v3 12/16] net: stmmac: dwmac-loongson: Add LS7A support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <6bd06061b987815959a17b5ceb490dca4667ee76.1691047285.git.chenfeiyang@loongson.cn>
Date: Thu,  3 Aug 2023 19:30:06 +0800
From: Feiyang Chen <chenfeiyang@...ngson.cn>
To: andrew@...n.ch,
	hkallweit1@...il.com,
	peppe.cavallaro@...com,
	alexandre.torgue@...s.st.com,
	joabreu@...opsys.com,
	chenhuacai@...ngson.cn
Cc: Feiyang Chen <chenfeiyang@...ngson.cn>,
	linux@...linux.org.uk,
	dongbiao@...ngson.cn,
	loongson-kernel@...ts.loongnix.cn,
	netdev@...r.kernel.org,
	loongarch@...ts.linux.dev,
	chris.chenfeiyang@...il.com
Subject: [PATCH v3 12/16] net: stmmac: dwmac-loongson: Add LS7A support

Current dwmac-loongson only support LS2K in the "probed with PCI
and configured with DT" manner. Add LS7A support on which the
devices are fully PCI (non-DT).

Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
---
 .../ethernet/stmicro/stmmac/dwmac-loongson.c  | 79 ++++++++++---------
 1 file changed, 43 insertions(+), 36 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index ff4fa74d2a11..c7790f73fe18 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -16,6 +16,10 @@ struct stmmac_pci_info {
 static void loongson_default_data(struct pci_dev *pdev,
 				  struct plat_stmmacenet_data *plat)
 {
+	/* Get bus_id, this can be overloaded later */
+	plat->bus_id = (pci_domain_nr(pdev->bus) << 16) |
+		       PCI_DEVID(pdev->bus->number, pdev->devfn);
+
 	plat->clk_csr = 2;	/* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
 	plat->has_gmac = 1;
 	plat->force_sf_dma_mode = 1;
@@ -56,6 +60,9 @@ static int loongson_gmac_data(struct pci_dev *pdev,
 	plat->dma_cfg->pbl = 32;
 	plat->dma_cfg->pblx8 = true;
 
+	plat->clk_ref_rate = 125000000;
+	plat->clk_ptp_rate = 125000000;
+
 	return 0;
 }
 
@@ -72,13 +79,6 @@ static int loongson_dwmac_probe(struct pci_dev *pdev,
 	struct stmmac_resources res;
 	struct device_node *np;
 
-	np = dev_of_node(&pdev->dev);
-
-	if (!np) {
-		pr_info("dwmac_loongson_pci: No OF node\n");
-		return -ENODEV;
-	}
-
 	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
 	if (!plat)
 		return -ENOMEM;
@@ -94,6 +94,7 @@ static int loongson_dwmac_probe(struct pci_dev *pdev,
 	if (!plat->dma_cfg)
 		return -ENOMEM;
 
+	np = dev_of_node(&pdev->dev);
 	plat->mdio_node = of_get_child_by_name(np, "mdio");
 	if (plat->mdio_node) {
 		dev_info(&pdev->dev, "Found MDIO subnode\n");
@@ -125,42 +126,48 @@ static int loongson_dwmac_probe(struct pci_dev *pdev,
 	if (ret)
 		goto err_disable_device;
 
-	bus_id = of_alias_get_id(np, "ethernet");
-	if (bus_id >= 0)
-		plat->bus_id = bus_id;
+	if (np) {
+		bus_id = of_alias_get_id(np, "ethernet");
+		if (bus_id >= 0)
+			plat->bus_id = bus_id;
 
-	phy_mode = device_get_phy_mode(&pdev->dev);
-	if (phy_mode < 0) {
-		dev_err(&pdev->dev, "phy_mode not found\n");
-		ret = phy_mode;
-		goto err_disable_device;
+		phy_mode = device_get_phy_mode(&pdev->dev);
+		if (phy_mode < 0) {
+			dev_err(&pdev->dev, "phy_mode not found\n");
+			ret = phy_mode;
+			goto err_disable_device;
+		}
+		plat->phy_interface = phy_mode;
 	}
-	plat->phy_interface = phy_mode;
 
 	pci_enable_msi(pdev);
 
 	memset(&res, 0, sizeof(res));
 	res.addr = pcim_iomap_table(pdev)[0];
-
-	res.irq = of_irq_get_byname(np, "macirq");
-	if (res.irq < 0) {
-		dev_err(&pdev->dev, "IRQ macirq not found\n");
-		ret = -ENODEV;
-		goto err_disable_msi;
-	}
-
-	res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
-	if (res.wol_irq < 0) {
-		dev_info(&pdev->dev,
-			 "IRQ eth_wake_irq not found, using macirq\n");
-		res.wol_irq = res.irq;
-	}
-
-	res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
-	if (res.lpi_irq < 0) {
-		dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
-		ret = -ENODEV;
-		goto err_disable_msi;
+	if (np) {
+		res.irq = of_irq_get_byname(np, "macirq");
+		if (res.irq < 0) {
+			dev_err(&pdev->dev, "IRQ macirq not found\n");
+			ret = -ENODEV;
+			goto err_disable_msi;
+		}
+
+		res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
+		if (res.wol_irq < 0) {
+			dev_info(&pdev->dev,
+				 "IRQ eth_wake_irq not found, using macirq\n");
+			res.wol_irq = res.irq;
+		}
+
+		res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
+		if (res.lpi_irq < 0) {
+			dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
+			ret = -ENODEV;
+			goto err_disable_msi;
+		}
+	} else {
+		res.irq = pdev->irq;
+		res.wol_irq = pdev->irq;
 	}
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
-- 
2.39.3