[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a144aa6351412e25bbdf866c0d31b550e6ff3e8a.camel@redhat.com>
Date: Thu, 03 Aug 2023 16:20:06 +0200
From: Paolo Abeni <pabeni@...hat.com>
To: "huangjie.albert" <huangjie.albert@...edance.com>, davem@...emloft.net,
edumazet@...gle.com, kuba@...nel.org
Cc: Alexei Starovoitov <ast@...nel.org>, Daniel Borkmann
<daniel@...earbox.net>, Jesper Dangaard Brouer <hawk@...nel.org>, John
Fastabend <john.fastabend@...il.com>, Björn Töpel
<bjorn@...nel.org>, Magnus Karlsson <magnus.karlsson@...el.com>, Maciej
Fijalkowski <maciej.fijalkowski@...el.com>, Jonathan Lemon
<jonathan.lemon@...il.com>, Pavel Begunkov <asml.silence@...il.com>,
Yunsheng Lin <linyunsheng@...wei.com>, Kees Cook <keescook@...omium.org>,
Richard Gobert <richardbgobert@...il.com>, "open list:NETWORKING DRIVERS"
<netdev@...r.kernel.org>, open list <linux-kernel@...r.kernel.org>, "open
list:XDP (eXpress Data Path)" <bpf@...r.kernel.org>
Subject: Re: [RFC Optimizing veth xsk performance 00/10]
On Thu, 2023-08-03 at 22:04 +0800, huangjie.albert wrote:
> AF_XDP is a kernel bypass technology that can greatly improve performance.
> However, for virtual devices like veth, even with the use of AF_XDP sockets,
> there are still many additional software paths that consume CPU resources.
> This patch series focuses on optimizing the performance of AF_XDP sockets
> for veth virtual devices. Patches 1 to 4 mainly involve preparatory work.
> Patch 5 introduces tx queue and tx napi for packet transmission, while
> patch 9 primarily implements zero-copy, and patch 10 adds support for
> batch sending of IPv4 UDP packets. These optimizations significantly reduce
> the software path and support checksum offload.
>
> I tested those feature with
> A typical topology is shown below:
> veth<-->veth-peer veth1-peer<--->veth1
> 1 | | 7
> |2 6|
> | |
> bridge<------->eth0(mlnx5)- switch -eth1(mlnx5)<--->bridge1
> 3 4 5
> (machine1) (machine2)
> AF_XDP socket is attach to veth and veth1. and send packets to physical NIC(eth0)
> veth:(172.17.0.2/24)
> bridge:(172.17.0.1/24)
> eth0:(192.168.156.66/24)
>
> eth1(172.17.0.2/24)
> bridge1:(172.17.0.1/24)
> eth0:(192.168.156.88/24)
>
> after set default route��?snat��?dnat. we can have a tests
> to get the performance results.
>
> packets send from veth to veth1:
> af_xdp test tool:
> link:https://github.com/cclinuxer/libxudp
> send:(veth)
> ./objs/xudpperf send --dst 192.168.156.88:6002 -l 1300
> recv:(veth1)
> ./objs/xudpperf recv --src 172.17.0.2:6002
>
> udp test tool:iperf3
> send:(veth)
> iperf3 -c 192.168.156.88 -p 6002 -l 1300 -b 60G -u
Should be: '-b 0' otherwise you will experience additional overhead.
And you would likely pin processes and irqs to ensure BH and US run on
different cores of the same numa node.
Cheers,
Paolo
Powered by blists - more mailing lists