Message-ID:
 <MEYP282MB269764FF815272CA2BA19067BB08A@MEYP282MB2697.AUSP282.PROD.OUTLOOK.COM>
Date: Thu,  3 Aug 2023 10:41:07 +0800
From: Jinjian Song <songjinjian@...mail.com>
To: netdev@...r.kernel.org
Cc: kuba@...nel.org,
	davem@...emloft.net,
	johannes@...solutions.net,
	ryazanov.s.a@...il.com,
	loic.poulain@...aro.org,
	ilpo.jarvinen@...ux.intel.com,
	ricardo.martinez@...ux.intel.com,
	chiranjeevi.rapolu@...ux.intel.com,
	haijun.liu@...iatek.com,
	edumazet@...gle.com,
	pabeni@...hat.com,
	chandrashekar.devegowda@...el.com,
	m.chetan.kumar@...ux.intel.com,
	linuxwwan@...el.com,
	linuxwwan_5g@...el.com,
	soumya.prakash.mishra@...el.com,
	jesse.brandeburg@...el.com,
	danielwinkler@...gle.com,
	Jinjian Song <jinjian.song@...ocom.com>
Subject: [net-next 6/6] net: wwan: t7xx: Devlink documentation

From: Jinjian Song <jinjian.song@...ocom.com>

Document the t7xx devlink commands usage for firmware flashing &
coredump collection.

Base on the v5 patch version of follow series:
'net: wwan: t7xx: fw flashing & coredump support'
(https://patchwork.kernel.org/project/netdevbpf/patch/f902d4a0cb807a205687f7e693079fba72ca7341.1674307425.git.m.chetan.kumar@linux.intel.com/)

Signed-off-by: Jinjian Song <jinjian.song@...ocom.com>
---
 Documentation/networking/devlink/index.rst |   1 +
 Documentation/networking/devlink/t7xx.rst  | 232 +++++++++++++++++++++
 2 files changed, 233 insertions(+)
 create mode 100644 Documentation/networking/devlink/t7xx.rst

diff --git a/Documentation/networking/devlink/index.rst b/Documentation/networking/devlink/index.rst
index b49749e2b9a6..f101781105ca 100644
--- a/Documentation/networking/devlink/index.rst
+++ b/Documentation/networking/devlink/index.rst
@@ -67,3 +67,4 @@ parameters, info versions, and other features it supports.
    iosm
    octeontx2
    sfc
+   mtk_t7xx
diff --git a/Documentation/networking/devlink/t7xx.rst b/Documentation/networking/devlink/t7xx.rst
new file mode 100644
index 000000000000..1f5108338ef0
--- /dev/null
+++ b/Documentation/networking/devlink/t7xx.rst
@@ -0,0 +1,232 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================
+t7xx devlink support
+====================
+
+This document describes the devlink features implemented by the ``t7xx``
+device driver.
+
+Parameters
+==========
+The ``t7xx`` driver implements the following driver-specific parameters.
+
+.. list-table:: Driver-specific parameters
+   :widths: 5 5 5 85
+
+   * - Name
+     - Type
+     - Mode
+     - Description
+   * - ``fastboot``
+     - boolean
+     - driverinit
+     - Set this param to enter fastboot mode.
+
+Flash Update
+============
+
+The ``t7xx`` driver implements the flash update using the ``devlink-flash``
+interface.
+
+The driver uses ``DEVLINK_SUPPORT_FLASH_UPDATE_OVERWRITE_MASK`` to identify the type of
+firmware image that need to be programmed upon the request by user space application.
+
+``t7xx`` driver uses fastboot protocol for firmware flashing. In the firmware
+flashing procedure, fastboot command & response are exchanged between driver
+and wwan device.
+
+::
+
+  $ devlink dev param set pci/0000:bdf name fastboot value 1 cmode driverinit
+
+The devlink param fastboot is set to true via devlink param command, by
+passing name ``fastboot``, value ``1`` and cmode ``driverinit``.
+
+::
+
+  $ devlink dev reload pci/0000:$bdf action driver_reinit
+
+The wwan device is put into fastboot mode via devlink reload command, by
+passing ``driver_reinit`` action.
+
+::
+
+  $ devlink dev reload pci/0000:$bdf action fw_activate
+
+Upon completion of firmware flashing or coredump collection the wwan device is
+reset to normal mode using devlink reload command, by passing ``fw_activate``
+action.
+
+Flash Commands
+--------------
+
+::
+
+  $ devlink dev flash pci/0000:$bdf file preloader_k6880v1_mdot2_datacard.bin component "preloader"
+
+::
+
+  $ devlink dev flash pci/0000:$bdf file loader_ext-verified.img component "loader_ext1"
+
+::
+
+  $ devlink dev flash pci/0000:$bdf file tee-verified.img component "tee1"
+
+::
+
+  $ devlink dev flash pci/0000:$bdf file lk-verified.img component "lk"
+
+::
+
+  $ devlink dev flash pci/0000:$bdf file spmfw-verified.img component "spmfw"
+
+::
+
+  $ devlink dev flash pci/0000:$bdf file sspm-verified.img component "sspm_1"
+
+::
+
+  $ devlink dev flash pci/0000:$bdf file mcupm-verified.img component "mcupm_1"
+
+::
+
+  $ devlink dev flash pci/0000:$bdf file dpm-verified.img component "dpm_1"
+
+::
+
+  $ devlink dev flash pci/0000:$bdf file boot-verified.img component "boot"
+
+::
+
+  $ devlink dev flash pci/0000:$bdf file root.squashfs component "rootfs"
+
+::
+
+  $ devlink dev flash pci/0000:$bdf file modem-verified.img component "md1img"
+
+::
+
+  $ devlink dev flash pci/0000:$bdf file dsp-verified.bin component "md1dsp"
+
+::
+
+  $ devlink dev flash pci/0000:$bdf file OP_OTA.img component "mcf1"
+
+::
+
+  $ devlink dev flash pci/0000:$bdf file OEM_OTA.img component "mcf2"
+
+::
+
+  $ devlink dev flash pci/0000:$bdf file DEV_OTA.img component "mcf3"
+
+Note: Component selects the partition type to be programmed.
+
+
+The supported list of firmware image types is described below.
+
+.. list-table:: Firmware Image types
+    :widths: 15 85
+
+    * - Name
+      - Description
+    * - ``preloader``
+      - The first-stage bootloader image
+    * - ``loader_ext1``
+      - Preloader extension image
+    * - ``tee1``
+      - ARM trusted firmware and TEE (Trusted Execution Environment) image
+    * - ``lk``
+      - The second-stage bootloader image
+    * - ``spmfw``
+      - MediaTek in-house ASIC for power management image
+    * - ``sspm_1``
+      - MediaTek in-house ASIC for power management under secure world image
+    * - ``mcupm_1``
+      - MediaTek in-house ASIC for cpu power management image
+    * - ``dpm_1``
+      - MediaTek in-house ASIC for dram power management image
+    * - ``boot``
+      - The kernel and dtb image
+    * - ``rootfs``
+      - Root filesystem image
+    * - ``md1img``
+      - Modem image
+    * - ``md1dsp``
+      - Modem DSP image
+    * - ``mcf1``
+      - Modem OTA image (Modem Configuration Framework) for operators
+    * - ``mcf2``
+      - Modem OTA image (Modem Configuration Framework) for OEM vendors
+    * - ``mcf3``
+      - Modem OTA image (other usage) for OEM configurations
+
+
+Regions
+=======
+
+The ``t7xx`` driver supports core dump collection in exception state and second
+stage bootloader log collection in fastboot mode. The log snapshot is taken by
+the driver using fastboot commands.
+
+Region commands
+---------------
+
+::
+
+  $ devlink region show
+
+This command list the regions implemented by driver. These regions are accessed
+for device internal data. Below table describes the regions.
+
+.. list-table:: Regions
+    :widths: 15 85
+
+    * - Name
+      - Description
+    * - ``mr_dump``
+      - The detailed modem component logs are captured in this region
+    * - ``lk_dump``
+      - This region dumps the current snapshot of lk
+
+Coredump Collection
+~~~~~~~~~~~~~~~~~~
+
+::
+
+  $ devlink region new mr_dump
+
+::
+
+  $ devlink region read mr_dump snapshot 0 address 0 length $len
+
+::
+
+  $ devlink region del mr_dump snapshot 0
+
+Note: $len is actual len to be dumped.
+
+The userspace application uses these commands for obtaining the modem component
+logs when device encounters an exception.
+
+Second Stage Bootloader dump
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+::
+
+  $ devlink region new lk_dump
+
+::
+
+  $ devlink region read lk_dump snapshot 0 address 0 length $len
+
+::
+
+  $ devlink region del lk_dump snapshot 0
+
+Note: $len is actual len to be dumped.
+
+In fastboot mode the userspace application uses these commands for obtaining the
+current snapshot of second stage bootloader.
+
-- 
2.34.1

Powered by blists - more mailing lists