netdev - [PATCH net-next] net: dsa: mv88e6060: add phylink_get

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1qTiMC-003FJP-V3@rmk-PC.armlinux.org.uk>
Date: Wed, 09 Aug 2023 13:32:08 +0100
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>
Cc: Florian Fainelli <f.fainelli@...il.com>,
	Vladimir Oltean <olteanv@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	netdev@...r.kernel.org
Subject: [PATCH net-next] net: dsa: mv88e6060: add phylink_get_caps
 implementation

Add a phylink_get_caps implementation for Marvell 88e6060 DSA switch.
This is a fast ethernet switch, with internal PHYs for ports 0 through
4. Port 4 also supports MII, REVMII, REVRMII and SNI. Port 5 supports
MII, REVMII, REVRMII and SNI without an internal PHY.

Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
 drivers/net/dsa/mv88e6060.c | 46 +++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index fdda62d6eb16..4f3df3a3a1f6 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -247,11 +247,57 @@ mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
 	return reg_write(priv, addr, regnum, val);
 }
 
+static void mv88e6060_phylink_get_caps(struct dsa_switch *ds, int port,
+				       struct phylink_config *config)
+{
+	unsigned long *interfaces = config->supported_interfaces;
+	struct mv88e6060_priv *priv = ds->priv;
+	int addr = REG_PORT(port);
+	int ret;
+
+	ret = reg_read(priv, addr, PORT_STATUS);
+	if (ret < 0) {
+		dev_err(ds->dev,
+			"port %d: unable to read status register: %pe\n",
+			port, PTR_ERR(ret));
+		return;
+	}
+
+	if (!(ret & PORT_STATUS_PORTMODE)) {
+		/* Port configured in SNI mode (acts as a 10Mbps PHY) */
+		config->mac_capabilities = MAC_10 | MAC_SYM_PAUSE;
+		/* I don't think SNI is SMII - SMII has a sync signal, and
+		 * SNI doesn't.
+		 */
+		__set_bit(PHY_INTERFACE_MODE_SMII, interfaces);
+		return;
+	}
+
+	config->mac_capabilities = MAC_100 | MAC_10 | MAC_SYM_PAUSE;
+
+	if (port >= 4) {
+		/* Ports 4 and 5 can support MII, REVMII and REVRMII modes */
+		__set_bit(PHY_INTERFACE_MODE_MII, interfaces);
+		__set_bit(PHY_INTERFACE_MODE_REVMII, interfaces);
+		__set_bit(PHY_INTERFACE_MODE_REVRMII, interfaces);
+	}
+	if (port <= 4) {
+		/* Ports 0 to 3 have internal PHYs, and port 4 can optionally
+		 * use an internal PHY.
+		 */
+		/* Internal PHY */
+		__set_bit(PHY_INTERFACE_MODE_INTERNAL, interfaces);
+		/* Default phylib interface mode */
+		__set_bit(PHY_INTERFACE_MODE_GMII, interfaces);
+	}
+}
+
 static const struct dsa_switch_ops mv88e6060_switch_ops = {
 	.get_tag_protocol = mv88e6060_get_tag_protocol,
 	.setup		= mv88e6060_setup,
 	.phy_read	= mv88e6060_phy_read,
 	.phy_write	= mv88e6060_phy_write,
+	.phylink_get_caps = mv88e6060_phylink_get_caps,
 };
 
 static int mv88e6060_probe(struct mdio_device *mdiodev)
-- 
2.30.2