| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZNUKHeMs5M8WBDtJ@xhacker>
Date: Fri, 11 Aug 2023 00:02:37 +0800
From: Jisheng Zhang <jszhang@...nel.org>
To: Alexandre TORGUE <alexandre.torgue@...s.st.com>
Cc: "David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Jose Abreu <joabreu@...opsys.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH net-next v3 05/10] net: stmmac: reflect multi irqs for
tx/rx channels and mac and safety
On Thu, Aug 10, 2023 at 04:50:18PM +0200, Alexandre TORGUE wrote:
> On 8/9/23 18:50, Jisheng Zhang wrote:
> > The IP supports per channel interrupt, when intel adds the per channel
> > interrupt support, the per channel irq is from MSI vector, but this
> > feature can also be supported on non-MSI platforms. Do some necessary
> > renaming to reflects this fact.
> >
> > Signed-off-by: Jisheng Zhang <jszhang@...nel.org>
> > ---
> > .../net/ethernet/stmicro/stmmac/dwmac-intel.c | 4 +-
> > .../net/ethernet/stmicro/stmmac/dwmac4_dma.c | 2 +-
> > .../net/ethernet/stmicro/stmmac/stmmac_main.c | 48 +++++++++----------
> > include/linux/stmmac.h | 4 +-
> > 4 files changed, 29 insertions(+), 29 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> > index 0ffae785d8bd..99a072907008 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> > @@ -953,7 +953,7 @@ static int stmmac_config_single_msi(struct pci_dev *pdev,
> > res->irq = pci_irq_vector(pdev, 0);
> > res->wol_irq = res->irq;
> > - plat->flags &= ~STMMAC_FLAG_MULTI_MSI_EN;
> > + plat->flags &= ~STMMAC_FLAG_PERCH_IRQ_EN;
> > dev_info(&pdev->dev, "%s: Single IRQ enablement successful\n",
> > __func__);
> > @@ -1005,7 +1005,7 @@ static int stmmac_config_multi_msi(struct pci_dev *pdev,
> > if (plat->msi_sfty_ue_vec < STMMAC_MSI_VEC_MAX)
> > res->sfty_ue_irq = pci_irq_vector(pdev, plat->msi_sfty_ue_vec);
> > - plat->flags |= STMMAC_FLAG_MULTI_MSI_EN;
> > + plat->flags |= STMMAC_FLAG_PERCH_IRQ_EN;
> > dev_info(&pdev->dev, "%s: multi MSI enablement successful\n", __func__);
> > return 0;
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
> > index 84d3a8551b03..9bf8adf466a2 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
> > @@ -175,7 +175,7 @@ static void dwmac4_dma_init(void __iomem *ioaddr,
> > value = readl(ioaddr + DMA_BUS_MODE);
> > - if (dma_cfg->multi_msi_en) {
> > + if (dma_cfg->perch_irq_en) {
> > value &= ~DMA_BUS_MODE_INTM_MASK;
> > value |= (DMA_BUS_MODE_INTM_MODE1 << DMA_BUS_MODE_INTM_SHIFT);
> > }
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > index 15ed3947361b..4ed5c976c7a3 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > @@ -125,11 +125,11 @@ module_param(chain_mode, int, 0444);
> > MODULE_PARM_DESC(chain_mode, "To use chain instead of ring mode");
> > static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
> > -/* For MSI interrupts handling */
> > +/* For multi interrupts handling */
> > static irqreturn_t stmmac_mac_interrupt(int irq, void *dev_id);
> > static irqreturn_t stmmac_safety_interrupt(int irq, void *dev_id);
> > -static irqreturn_t stmmac_msi_intr_tx(int irq, void *data);
> > -static irqreturn_t stmmac_msi_intr_rx(int irq, void *data);
> > +static irqreturn_t stmmac_queue_intr_tx(int irq, void *data);
> > +static irqreturn_t stmmac_queue_intr_rx(int irq, void *data);
> > static void stmmac_reset_rx_queue(struct stmmac_priv *priv, u32 queue);
> > static void stmmac_reset_tx_queue(struct stmmac_priv *priv, u32 queue);
> > static void stmmac_reset_queues_param(struct stmmac_priv *priv);
> > @@ -3513,7 +3513,7 @@ static void stmmac_free_irq(struct net_device *dev,
> > }
> > }
> > -static int stmmac_request_irq_multi_msi(struct net_device *dev)
> > +static int stmmac_request_irq_multi(struct net_device *dev)
>
> What mean "irq_multi". You change previously "multi_msi" by "perch_irq",
> maybe you could do something with this "perch" naming ?
The function request irq for all channels for STMMAC_FLAG_PERCH_IRQ_EN
case, so what about stmmac_request_irq_multi_channel?
>
> > {
> > struct stmmac_priv *priv = netdev_priv(dev);
> > enum request_irq_err irq_err;
> > @@ -3530,7 +3530,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> > 0, int_name, dev);
> > if (unlikely(ret < 0)) {
> > netdev_err(priv->dev,
> > - "%s: alloc mac MSI %d (error: %d)\n",
> > + "%s: alloc mac irq %d (error: %d)\n",
> > __func__, dev->irq, ret);
> > irq_err = REQ_IRQ_ERR_MAC;
> > goto irq_error;
> > @@ -3547,7 +3547,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> > 0, int_name, dev);
> > if (unlikely(ret < 0)) {
> > netdev_err(priv->dev,
> > - "%s: alloc wol MSI %d (error: %d)\n",
> > + "%s: alloc wol irq %d (error: %d)\n",
> > __func__, priv->wol_irq, ret);
> > irq_err = REQ_IRQ_ERR_WOL;
> > goto irq_error;
> > @@ -3565,7 +3565,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> > 0, int_name, dev);
> > if (unlikely(ret < 0)) {
> > netdev_err(priv->dev,
> > - "%s: alloc lpi MSI %d (error: %d)\n",
> > + "%s: alloc lpi irq %d (error: %d)\n",
> > __func__, priv->lpi_irq, ret);
> > irq_err = REQ_IRQ_ERR_LPI;
> > goto irq_error;
> > @@ -3583,7 +3583,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> > 0, int_name, dev);
> > if (unlikely(ret < 0)) {
> > netdev_err(priv->dev,
> > - "%s: alloc sfty ce MSI %d (error: %d)\n",
> > + "%s: alloc sfty ce irq %d (error: %d)\n",
> > __func__, priv->sfty_ce_irq, ret);
> > irq_err = REQ_IRQ_ERR_SFTY_CE;
> > goto irq_error;
> > @@ -3601,14 +3601,14 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> > 0, int_name, dev);
> > if (unlikely(ret < 0)) {
> > netdev_err(priv->dev,
> > - "%s: alloc sfty ue MSI %d (error: %d)\n",
> > + "%s: alloc sfty ue irq %d (error: %d)\n",
> > __func__, priv->sfty_ue_irq, ret);
> > irq_err = REQ_IRQ_ERR_SFTY_UE;
> > goto irq_error;
> > }
> > }
> > - /* Request Rx MSI irq */
> > + /* Request Rx queue irq */
> > for (i = 0; i < priv->plat->rx_queues_to_use; i++) {
> > if (i >= MTL_MAX_RX_QUEUES)
> > break;
> > @@ -3618,11 +3618,11 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> > int_name = priv->int_name_rx_irq[i];
> > sprintf(int_name, "%s:%s-%d", dev->name, "rx", i);
> > ret = request_irq(priv->rx_irq[i],
> > - stmmac_msi_intr_rx,
> > + stmmac_queue_intr_rx,
> > 0, int_name, &priv->dma_conf.rx_queue[i]);
> > if (unlikely(ret < 0)) {
> > netdev_err(priv->dev,
> > - "%s: alloc rx-%d MSI %d (error: %d)\n",
> > + "%s: alloc rx-%d irq %d (error: %d)\n",
> > __func__, i, priv->rx_irq[i], ret);
> > irq_err = REQ_IRQ_ERR_RX;
> > irq_idx = i;
> > @@ -3633,7 +3633,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> > irq_set_affinity_hint(priv->rx_irq[i], &cpu_mask);
> > }
> > - /* Request Tx MSI irq */
> > + /* Request Tx queue irq */
> > for (i = 0; i < priv->plat->tx_queues_to_use; i++) {
> > if (i >= MTL_MAX_TX_QUEUES)
> > break;
> > @@ -3643,11 +3643,11 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> > int_name = priv->int_name_tx_irq[i];
> > sprintf(int_name, "%s:%s-%d", dev->name, "tx", i);
> > ret = request_irq(priv->tx_irq[i],
> > - stmmac_msi_intr_tx,
> > + stmmac_queue_intr_tx,
> > 0, int_name, &priv->dma_conf.tx_queue[i]);
> > if (unlikely(ret < 0)) {
> > netdev_err(priv->dev,
> > - "%s: alloc tx-%d MSI %d (error: %d)\n",
> > + "%s: alloc tx-%d irq %d (error: %d)\n",
> > __func__, i, priv->tx_irq[i], ret);
> > irq_err = REQ_IRQ_ERR_TX;
> > irq_idx = i;
> > @@ -3722,8 +3722,8 @@ static int stmmac_request_irq(struct net_device *dev)
> > int ret;
> > /* Request the IRQ lines */
> > - if (priv->plat->flags & STMMAC_FLAG_MULTI_MSI_EN)
> > - ret = stmmac_request_irq_multi_msi(dev);
> > + if (priv->plat->flags & STMMAC_FLAG_PERCH_IRQ_EN)
> > + ret = stmmac_request_irq_multi(dev);
> > else
> > ret = stmmac_request_irq_single(dev);
> > @@ -5938,7 +5938,7 @@ static irqreturn_t stmmac_safety_interrupt(int irq, void *dev_id)
> > return IRQ_HANDLED;
> > }
> > -static irqreturn_t stmmac_msi_intr_tx(int irq, void *data)
> > +static irqreturn_t stmmac_queue_intr_tx(int irq, void *data)
> > {
> > struct stmmac_tx_queue *tx_q = (struct stmmac_tx_queue *)data;
> > struct stmmac_dma_conf *dma_conf;
> > @@ -5970,7 +5970,7 @@ static irqreturn_t stmmac_msi_intr_tx(int irq, void *data)
> > return IRQ_HANDLED;
> > }
> > -static irqreturn_t stmmac_msi_intr_rx(int irq, void *data)
> > +static irqreturn_t stmmac_queue_intr_rx(int irq, void *data)
> > {
> > struct stmmac_rx_queue *rx_q = (struct stmmac_rx_queue *)data;
> > struct stmmac_dma_conf *dma_conf;
> > @@ -6007,12 +6007,12 @@ static void stmmac_poll_controller(struct net_device *dev)
> > if (test_bit(STMMAC_DOWN, &priv->state))
> > return;
> > - if (priv->plat->flags & STMMAC_FLAG_MULTI_MSI_EN) {
> > + if (priv->plat->flags & STMMAC_FLAG_PERCH_IRQ_EN) {
> > for (i = 0; i < priv->plat->rx_queues_to_use; i++)
> > - stmmac_msi_intr_rx(0, &priv->dma_conf.rx_queue[i]);
> > + stmmac_queue_intr_rx(0, &priv->dma_conf.rx_queue[i]);
> > for (i = 0; i < priv->plat->tx_queues_to_use; i++)
> > - stmmac_msi_intr_tx(0, &priv->dma_conf.tx_queue[i]);
> > + stmmac_queue_intr_tx(0, &priv->dma_conf.tx_queue[i]);
> > } else {
> > disable_irq(dev->irq);
> > stmmac_interrupt(dev->irq, dev);
> > @@ -7278,8 +7278,8 @@ int stmmac_dvr_probe(struct device *device,
> > priv->plat = plat_dat;
> > priv->ioaddr = res->addr;
> > priv->dev->base_addr = (unsigned long)res->addr;
> > - priv->plat->dma_cfg->multi_msi_en =
> > - (priv->plat->flags & STMMAC_FLAG_MULTI_MSI_EN);
> > + priv->plat->dma_cfg->perch_irq_en =
> > + (priv->plat->flags & STMMAC_FLAG_PERCH_IRQ_EN);
> > priv->dev->irq = res->irq;
> > priv->wol_irq = res->wol_irq;
> > diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> > index 11671fd6adee..76249117c0ff 100644
> > --- a/include/linux/stmmac.h
> > +++ b/include/linux/stmmac.h
> > @@ -96,7 +96,7 @@ struct stmmac_dma_cfg {
> > int mixed_burst;
> > bool aal;
> > bool eame;
> > - bool multi_msi_en;
> > + bool perch_irq_en;
> > bool dche;
> > };
> > @@ -211,7 +211,7 @@ struct dwmac4_addrs {
> > #define STMMAC_FLAG_TSO_EN BIT(4)
> > #define STMMAC_FLAG_SERDES_UP_AFTER_PHY_LINKUP BIT(5)
> > #define STMMAC_FLAG_VLAN_FAIL_Q_EN BIT(6)
> > -#define STMMAC_FLAG_MULTI_MSI_EN BIT(7)
> > +#define STMMAC_FLAG_PERCH_IRQ_EN BIT(7)
> > #define STMMAC_FLAG_EXT_SNAPSHOT_EN BIT(8)
> > #define STMMAC_FLAG_INT_SNAPSHOT_EN BIT(9)
> > #define STMMAC_FLAG_RX_CLK_RUNS_IN_LPI BIT(10)
>
Powered by blists - more mailing lists