netdev - RE: [PATCH v2 4/4] arm64: dts: fsd: Add Ethernet support for PERIC Block of FSD SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <000101d9ce99$f454da20$dcfe8e60$@samsung.com>
Date: Mon, 14 Aug 2023 15:57:29 +0530
From: "Sriranjani P" <sriranjani.p@...sung.com>
To: "'Krzysztof Kozlowski'" <krzysztof.kozlowski@...aro.org>,
	<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
	<pabeni@...hat.com>, <robh+dt@...nel.org>,
	<krzysztof.kozlowski+dt@...aro.org>, <alexandre.torgue@...s.st.com>,
	<peppe.cavallaro@...com>, <joabreu@...opsys.com>,
	<mcoquelin.stm32@...il.com>
Cc: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <pankaj.dubey@...sung.com>,
	<alim.akhtar@...sung.com>, <ravi.patel@...sung.com>, "'Jayati Sahu'"
	<jayati.sahu@...sung.com>, <swathi.ks@...sung.com>
Subject: RE: [PATCH v2 4/4] arm64: dts: fsd: Add Ethernet support for PERIC
 Block of FSD SoC



> -----Original Message-----
> From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@...aro.org]
> Sent: 12 January 2023 15:07
> To: Sriranjani P <sriranjani.p@...sung.com>; davem@...emloft.net;
> edumazet@...gle.com; kuba@...nel.org; pabeni@...hat.com;
> robh+dt@...nel.org; krzysztof.kozlowski+dt@...aro.org;
> alexandre.torgue@...s.st.com; peppe.cavallaro@...com;
> joabreu@...opsys.com; mcoquelin.stm32@...il.com
> Cc: netdev@...r.kernel.org; devicetree@...r.kernel.org; linux-
> kernel@...r.kernel.org; pankaj.dubey@...sung.com;
> alim.akhtar@...sung.com; ravi.patel@...sung.com; Jayati Sahu
> <jayati.sahu@...sung.com>
> Subject: Re: [PATCH v2 4/4] arm64: dts: fsd: Add Ethernet support for PERIC
> Block of FSD SoC
> 
> On 11/01/2023 08:54, Sriranjani P wrote:
> > The FSD SoC contains two instances of Synopsys DWC QoS Ethernet IP,
> > one in
> > FSYS0 block and other in PERIC block.
> >
> > Adds device tree node for Ethernet in PERIC Block and enables the same
> > for FSD platform.
> >
> > Signed-off-by: Pankaj Dubey <pankaj.dubey@...sung.com>
> > Signed-off-by: Jayati Sahu <jayati.sahu@...sung.com>
> > Signed-off-by: Sriranjani P <sriranjani.p@...sung.com>
> > ---
> >  arch/arm64/boot/dts/tesla/fsd-evb.dts      |  9 ++++
> >  arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi | 56
> ++++++++++++++++++++++
> >  arch/arm64/boot/dts/tesla/fsd.dtsi         | 29 +++++++++++
> >  3 files changed, 94 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/tesla/fsd-evb.dts
> > b/arch/arm64/boot/dts/tesla/fsd-evb.dts
> > index ca0c1a28d562..2c0cbe775e04 100644
> > --- a/arch/arm64/boot/dts/tesla/fsd-evb.dts
> > +++ b/arch/arm64/boot/dts/tesla/fsd-evb.dts
> > @@ -39,6 +39,15 @@
> >  	};
> >  };
> >
> > +&ethernet_1 {
> > +	status = "okay";
> > +
> > +	fixed-link {
> > +		speed = <1000>;
> > +		full-duplex;
> > +	};
> > +};
> > +
> >  &fin_pll {
> >  	clock-frequency = <24000000>;
> >  };
> > diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
> > b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
> > index 7ccc0738a149..c955bf159786 100644
> > --- a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
> > +++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
> > @@ -395,6 +395,62 @@
> >  		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> >  		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
> >  	};
> > +
> > +	eth1_tx_clk: eth1-tx-clk-pins {
> > +		samsung,pins = "gpf2-0";
> > +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> > +		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
> > +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> > +	};
> > +
> > +	eth1_tx_data: eth1-tx-data-pins {
> > +		samsung,pins = "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-4";
> > +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> > +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> > +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> > +	};
> > +
> > +	eth1_tx_ctrl: eth1-tx-ctrl-pins {
> > +		samsung,pins = "gpf2-5";
> > +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> > +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> > +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> > +	};
> > +
> > +	eth1_phy_intr: eth1-phy-intr-pins {
> > +		samsung,pins = "gpf2-6";
> > +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> > +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> > +		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
> > +	};
> > +
> > +	eth1_rx_clk: eth1-rx-clk-pins {
> > +		samsung,pins = "gpf3-0";
> > +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> > +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> > +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> > +	};
> > +
> > +	eth1_rx_data: eth1-rx-data-pins {
> > +		samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3", "gpf3-4";
> > +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> > +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> > +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> > +	};
> > +
> > +	eth1_rx_ctrl: eth1-rx-ctrl-pins {
> > +		samsung,pins = "gpf3-5";
> > +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> > +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> > +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> > +	};
> > +
> > +	eth1_mdio: eth1-mdio-pins {
> > +		samsung,pins = "gpf3-6", "gpf3-7";
> > +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> > +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> > +		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
> > +	};
> >  };
> >
> >  &pinctrl_pmu {
> > diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi
> > b/arch/arm64/boot/dts/tesla/fsd.dtsi
> > index ade707cc646b..8807055807dd 100644
> > --- a/arch/arm64/boot/dts/tesla/fsd.dtsi
> > +++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
> > @@ -33,6 +33,7 @@
> >  		spi1 = &spi_1;
> >  		spi2 = &spi_2;
> >  		eth0 = &ethernet_0;
> > +		eth1 = &ethernet_1;
> 
> Nope for the reasons I explained last time.
Sorry somehow I'm not able to find my previous mail chain.
I had replied to your comment in the previous version of the mail.
In this case alias id is used to differentiate between Ethernet instance 0 and 1 in the driver code.
> 
> >  	};
> >
> >  	cpus {
> > @@ -882,6 +883,34 @@
> >  			phy-mode = "rgmii";
> >  			status = "disabled";
> >  		};
> > +
> > +		ethernet_1: ethernet@...00000 {
> 
> Do not add nodes to the end.
If you mean to say that the nodes are supposed to be in the increasing order of physical address,
I can see that the existing file is not arranged in that format. If that is required I can first fix the
existing file and post the revised patch for the same. 
> 
> Best regards,
> Krzysztof