[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ZNzw1cqmGQaKpfGi@xhacker>
Date: Wed, 16 Aug 2023 23:52:53 +0800
From: Jisheng Zhang <jszhang@...nel.org>
To: Alexandre TORGUE <alexandre.torgue@...s.st.com>
Cc: "David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Jose Abreu <joabreu@...opsys.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH net-next v3 06/10] net: stmmac: xgmac: support
per-channel irq
On Thu, Aug 10, 2023 at 04:52:01PM +0200, Alexandre TORGUE wrote:
> On 8/9/23 18:50, Jisheng Zhang wrote:
> > The IP supports per channel interrupt, add support for this usage case.
> >
> > Signed-off-by: Jisheng Zhang <jszhang@...nel.org>
> > ---
> > .../net/ethernet/stmicro/stmmac/dwxgmac2.h | 2 ++
> > .../ethernet/stmicro/stmmac/dwxgmac2_dma.c | 33 +++++++++++--------
> > 2 files changed, 22 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> > index 81cbb13a101d..12e1228ccf2a 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> > @@ -327,6 +327,8 @@
> > /* DMA Registers */
> > #define XGMAC_DMA_MODE 0x00003000
> > +#define XGMAC_INTM GENMASK(13, 12)
> > +#define XGMAC_INTM_MODE1 0x1
> > #define XGMAC_SWR BIT(0)
> > #define XGMAC_DMA_SYSBUS_MODE 0x00003004
> > #define XGMAC_WR_OSR_LMT GENMASK(29, 24)
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
> > index b5ba4e0cca55..ef25af92d6cc 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
> > @@ -31,6 +31,13 @@ static void dwxgmac2_dma_init(void __iomem *ioaddr,
> > value |= XGMAC_EAME;
> > writel(value, ioaddr + XGMAC_DMA_SYSBUS_MODE);
> > +
> > + if (dma_cfg->perch_irq_en) {
> > + value = readl(ioaddr + XGMAC_DMA_MODE);
> > + value &= ~XGMAC_INTM;
> > + value |= FIELD_PREP(XGMAC_INTM, XGMAC_INTM_MODE1);
> > + writel(value, ioaddr + XGMAC_DMA_MODE);
> > + }
> > }
> > static void dwxgmac2_dma_init_chan(struct stmmac_priv *priv,
> > @@ -365,20 +372,20 @@ static int dwxgmac2_dma_interrupt(struct stmmac_priv *priv,
> > }
> > /* TX/RX NORMAL interrupts */
> > - if (likely(intr_status & XGMAC_NIS)) {
>
> No longer need to check NIS bit ?
Hi Alexandre,
NIS is RI | TI | TBU, since we have checked these three
bits we can ignore NIS. And dwmac4 behaves similarly.
Thanks
>
> > - if (likely(intr_status & XGMAC_RI)) {
> > - u64_stats_update_begin(&rx_q->rxq_stats.syncp);
> > - rx_q->rxq_stats.rx_normal_irq_n++;
> > - u64_stats_update_end(&rx_q->rxq_stats.syncp);
> > - ret |= handle_rx;
> > - }
> > - if (likely(intr_status & (XGMAC_TI | XGMAC_TBU))) {
> > - u64_stats_update_begin(&tx_q->txq_stats.syncp);
> > - tx_q->txq_stats.tx_normal_irq_n++;
> > - u64_stats_update_end(&tx_q->txq_stats.syncp);
> > - ret |= handle_tx;
> > - }
> > + if (likely(intr_status & XGMAC_RI)) {
> > + u64_stats_update_begin(&rx_q->rxq_stats.syncp);
> > + rx_q->rxq_stats.rx_normal_irq_n++;
> > + u64_stats_update_end(&rx_q->rxq_stats.syncp);
> > + ret |= handle_rx;
> > + }
> > + if (likely(intr_status & XGMAC_TI)) {
> > + u64_stats_update_begin(&tx_q->txq_stats.syncp);
> > + tx_q->txq_stats.tx_normal_irq_n++;
> > + u64_stats_update_end(&tx_q->txq_stats.syncp);
> > + ret |= handle_tx;
> > }
> > + if (unlikely(intr_status & XGMAC_TBU))
> > + ret |= handle_tx;
> > /* Clear interrupts */
> > writel(intr_en & intr_status, ioaddr + XGMAC_DMA_CH_STATUS(chan));
>
Powered by blists - more mailing lists