netdev - [net-next 09/15] net/mlx5: Update dead links in Kconfig documentation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230816210049.54733-10-saeed@kernel.org>
Date: Wed, 16 Aug 2023 14:00:43 -0700
From: Saeed Mahameed <saeed@...nel.org>
To: "David S. Miller" <davem@...emloft.net>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Eric Dumazet <edumazet@...gle.com>
Cc: Saeed Mahameed <saeedm@...dia.com>,
	netdev@...r.kernel.org,
	Tariq Toukan <tariqt@...dia.com>,
	Rahul Rameshbabu <rrameshbabu@...dia.com>,
	Gal Pressman <gal@...dia.com>
Subject: [net-next 09/15] net/mlx5: Update dead links in Kconfig documentation

From: Rahul Rameshbabu <rrameshbabu@...dia.com>

Point to NVIDIA documentation for device specific information now that the
Mellanox documentation site is deprecated. Refer to kernel documentation
sources for generic information not specific to mlx5 devices.

Signed-off-by: Rahul Rameshbabu <rrameshbabu@...dia.com>
Reviewed-by: Gal Pressman <gal@...dia.com>
Signed-off-by: Saeed Mahameed <saeedm@...dia.com>
---
 .../ethernet/mellanox/mlx5/kconfig.rst             | 14 +++++++-------
 Documentation/networking/xfrm_device.rst           |  1 +
 2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst
index 43b1f7e87ec4..0a42c3395ffa 100644
--- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst
+++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst
@@ -36,7 +36,7 @@ Enabling the driver and kconfig options
 
 **CONFIG_MLX5_CORE_EN_DCB=(y/n)**:
 
-|    Enables `Data Center Bridging (DCB) Support <https://community.mellanox.com/s/article/howto-auto-config-pfc-and-ets-on-connectx-4-via-lldp-dcbx>`_.
+|    Enables `Data Center Bridging (DCB) Support <https://enterprise-support.nvidia.com/s/article/howto-auto-config-pfc-and-ets-on-connectx-4-via-lldp-dcbx>`_.
 
 
 **CONFIG_MLX5_CORE_IPOIB=(y/n)**
@@ -59,12 +59,12 @@ Enabling the driver and kconfig options
 **CONFIG_MLX5_EN_ARFS=(y/n)**
 
 |    Enables Hardware-accelerated receive flow steering (arfs) support, and ntuple filtering.
-|    https://community.mellanox.com/s/article/howto-configure-arfs-on-connectx-4
+|    https://enterprise-support.nvidia.com/s/article/howto-configure-arfs-on-connectx-4
 
 
 **CONFIG_MLX5_EN_IPSEC=(y/n)**
 
-|    Enables `IPSec XFRM cryptography-offload acceleration <https://support.mellanox.com/s/article/ConnectX-6DX-Bluefield-2-IPsec-HW-Full-Offload-Configuration-Guide>`_.
+|    Enables :ref:`IPSec XFRM cryptography-offload acceleration <xfrm_device>`.
 
 
 **CONFIG_MLX5_EN_MACSEC=(y/n)**
@@ -87,8 +87,8 @@ Enabling the driver and kconfig options
 
 |    Ethernet SRIOV E-Switch support in ConnectX NIC. E-Switch provides internal SRIOV packet steering
 |    and switching for the enabled VFs and PF in two available modes:
-|           1) `Legacy SRIOV mode (L2 mac vlan steering based) <https://community.mellanox.com/s/article/howto-configure-sr-iov-for-connectx-4-connectx-5-with-kvm--ethernet-x>`_.
-|           2) `Switchdev mode (eswitch offloads) <https://www.mellanox.com/related-docs/prod_software/ASAP2_Hardware_Offloading_for_vSwitches_User_Manual_v4.4.pdf>`_.
+|           1) `Legacy SRIOV mode (L2 mac vlan steering based) <https://enterprise-support.nvidia.com/s/article/HowTo-Configure-SR-IOV-for-ConnectX-4-ConnectX-5-ConnectX-6-with-KVM-Ethernet>`_.
+|           2) :ref:`Switchdev mode (eswitch offloads) <switchdev>`.
 
 
 **CONFIG_MLX5_FPGA=(y/n)**
@@ -101,13 +101,13 @@ Enabling the driver and kconfig options
 
 **CONFIG_MLX5_INFINIBAND=(y/n/m)** (module mlx5_ib.ko)
 
-|    Provides low-level InfiniBand/RDMA and `RoCE <https://community.mellanox.com/s/article/recommended-network-configuration-examples-for-roce-deployment>`_ support.
+|    Provides low-level InfiniBand/RDMA and `RoCE <https://enterprise-support.nvidia.com/s/article/recommended-network-configuration-examples-for-roce-deployment>`_ support.
 
 
 **CONFIG_MLX5_MPFS=(y/n)**
 
 |    Ethernet Multi-Physical Function Switch (MPFS) support in ConnectX NIC.
-|    MPFs is required for when `Multi-Host <http://www.mellanox.com/page/multihost>`_ configuration is enabled to allow passing
+|    MPFs is required for when `Multi-Host <https://www.nvidia.com/en-us/networking/multi-host/>`_ configuration is enabled to allow passing
 |    user configured unicast MAC addresses to the requesting PF.
 
 
diff --git a/Documentation/networking/xfrm_device.rst b/Documentation/networking/xfrm_device.rst
index 83abdfef4ec3..535077cbeb07 100644
--- a/Documentation/networking/xfrm_device.rst
+++ b/Documentation/networking/xfrm_device.rst
@@ -1,4 +1,5 @@
 .. SPDX-License-Identifier: GPL-2.0
+.. _xfrm_device:
 
 ===============================================
 XFRM device - offloading the IPsec computations
-- 
2.41.0